铝,箔, Al, As Rolled Temper, 0.0015mm厚

您好，欢迎来到化工原料网！ [ 登录] [ 免费注册]

首页

半岛bd体育手机客户端

品牌:	Goodfellow
纯度含量:	99.0%
产地:	英国

索取资料及报价

半岛bd体育手机客户端介绍

订货号	包装规格
Sizes
702-857-87	25 mm x 25 mm
119-654-40	50 mm x 50 mm

半岛bd体育手机客户端参数

Purity[纯度]	99.0%
Temper[状态]	As Rolled
Thickness[厚度]	0.0015mm
Typical Analysis(典型分析)
Cu	<1000 PPM
Fe	<7000 PPM
Mn	<1000 PPM
Si	<5000 PPM
Zn	<1000 PPM
Atomic Properties(原子属性)
Atomic number	13
Atomic weight ( amu )	26.98154
Crystal structure	Face Centred Cubic
Electronic structure	Ne3s?3p?
Ionisation potential ( No./eV )	4 / 120
Ionisation potential ( No./eV )	5 / 154
Ionisation potential ( No./eV )	6 / 190
Ionisation potential ( No./eV )	1 / 5.99
Ionisation potential ( No./eV )	3 / 28.4
Ionisation potential ( No./eV )	2 / 18.8
Photo-electric work function ( eV )	4.20
Thermal neutron absorption cross-section ( Barns )	0.2320
Valences shown	3
Electrical Properties(电气特性)
Electrical resistivity ( μOhmcm )	2.67@20℃
Superconductivity critical temperature ( K )	1.1750
Temperature coefficient ( K?? )	0.00450 @0-100℃
Thermal emf against Pt (cold 0C - hot 100C) ( mV )	0.42
Mechanical Properties(机械性能)
Bulk modulus ( GPa ) ( Hard )	75.2
Bulk modulus ( GPa ) ( Soft )	75.2
Hardness - Vickers ( kgf mm?? ) ( Hard )	35 - 48
Hardness - Vickers ( kgf mm?? ) ( Soft )	21
Material condition	Soft
Material condition	Hard
Poisson's ratio ( Hard )	0.345
Poisson's ratio ( Soft )	0.345
Tensile modulus ( GPa ) ( Hard )	70.60
Tensile modulus ( GPa ) ( Soft )	70.60
Tensile strength ( MPa ) ( Hard )	130.00 - 195.00
Tensile strength ( MPa ) ( Soft )	50.00 - 90.00
Yield strength ( MPa ) ( Hard )	110.0 - 170.0
Yield strength ( MPa ) ( Soft )	10.0 - 35.0
Physical Properties(物理性质)
Boiling point ( C )	2467
Density ( g cm?? )	2.700 @20℃
Thermal Properties(热性能)
Coefficient of thermal expansion ( x10?? K?? )	23.500 @0-100℃
Latent heat of evaporation ( J g?? )	10800
Latent heat of fusion ( J g?? )	388.00
Melting point ( C )	660.40
Specific heat ( J K?? kg?? )	900.0 @25℃
Thermal conductivity ( W m?? K?? )	237.00 @0-100℃

其他参数

公差

长度	<100mm	±1mm
长度	≥100mm	+2% / -1%
直径	<100mm	±1mm
直径	≥100mm	+2% / -1%
厚度	<0.01mm	±25%
	≤0.05mm	±15%
	>0.05mm	±10%
长度 1	<100mm	±1mm
长度 1	≥100mm	+2% / -1%
长度 2	<100mm	±1mm
长度 2	≥100mm	+2% / -1%