| 缂栧彿 | 涓枃鍚嶇О | 鑻辨枃鍚嶇О |
| ANSI C78.1420-2001 | 鐢电伅.缂╁井鑳剁墖鎶曞奖鐏?GX5.3鍩哄骇鐨?鑻卞(50mm)鍐呬簩鑹叉€ф秱灞傚弽灏勮竟缁濈殑鏍囧噯鍗ら挩鐏?/td> | Electric Lamps - Microfilm Projection Lamps-Two-inch (51mm) Dichroic Coated IntegRAL Reflector, Rim Reference, Tungsten Halogen Lamps with GX5.3 Bases |
| ANSI C78.1434-2001 | 甯X7.9鍩哄骇鐨勫喎鍑濅簩鑹叉€ф秱灞傛暣浣撳弽鍏変晶閽夌殑鍗ら挩鎶曞皠鐏?/td> | Condensing Dichroic Coated Integral Reflector Side Pin Tungsten Halogen Projection Lamps with GX7.9 Bases |
| ANSI/ASTM A937/A 937M-2001 | 鍒╃敤涓や釜鐩搁偦璇曢獙琛ㄩ潰娴嬪畾缁濈紭娑傚眰灞傞棿鐢甸樆鐨勬柟娉旤/td> | Test Method for Determining Interlaminar Resistance of Insulating Coatings Using Two Adjacent Test Surfaces |
| ANSI/ASTM A976-1997 | 澶嶅悎缁濈紭娑傚眰缁濈紭鑳藉姏鍜屽簲鐢ㄧ殑鍒嗙被 | Classification of Insulating Coatings by Composition, Relative Insulating Ability and Application |
| ANSI/ASTM B735-1995 | 纭濋吀钂告皵娴嬭瘯閲戝睘鍩轰綋涓婇噾娑傚眰瀛旈殭鐜囩殑鏂规硶 | Test Method for Porosity in Gold Coatings on Metal Substrates by Nitric Acid Vapor |
| ANSI/ASTM B741-1995 | 绾哥數璋辨硶娴嬮噺閲戝睘鍩轰綋涓婇噾娑傚眰瀛旈殭鐜囩殑鏂规硶 | Test Method for Porosity in Gold Coatings on Metal Substrates by Paper Electrography |
| ANSI/ASTM B750-1999 | 鐑蹈娑傚眰閿?%閾濇贩鍚堢█鍦熷悎閲?UNS Z38510)閾搁敪瑙勮寖 | Specification for Zinc-5 % Aluminum-Mischmetal Alloy (UNS Z38510) in Ingot Form for Hot-Dip Coatings |
| ANSI/ASTM B798-1995 | 鍑濊兌浣撶數璋辨硶娴嬪畾閲戝睘鍩虹墿涓婇噾鎴栭挴娑傚眰瀛旈殭搴︾殑鏂规硶 | Test Method for Porosity in Gold or Palladium Coatings on Metal Substrates by Gel-Bulk Electrography |
| ANSI/ASTM D1458-2001 | 鐢电粷缂樼敤瀹屽叏纭寲纭呮鑳舵秱灞傜幓鐠冨竷涓庣幓鐠冨甫璇曢獙鏂规硶 | Test Methods for Fully Cured Silicone Rubber-Coated Glass Fabric and Tapes for Electrical Insulation |
| ANSI/ASTM D2534-1988 | 铚℃秱灞傜殑鍔ㄦ懇鎿︾郴鏁扮殑璇曢獙鏂规硶(05.01) | Coefficient of Kinetic Friction for Wax Coatings, Method of Test for (05.01) |
| ANSI/ASTM D3214-1997 | 鐢电粷缂樻秱鏂欑矇鏈強鍏舵秱灞傝瘯楠屾柟娉旤/td> | Test Methods for Coating Powders and Their Coatings Used for Electrical Insulation |
| ANSI/ASTM D3236-1988 | 鐑啍鎬ц兌绮樺墏鍜屾秱灞傛潗鏂欑殑琛ㄨ瀵嗗害鐨勮瘯楠屾柟娉?05.02) | Apparent Viscosity of Hot Melt Adhesives and Coating Materials, Method of Test for (05.02) |
| ANSI/ASTM D3521-1986 | 娉㈢汗绾告澘涓婅〃闈㈣湣娑傚眰鐨勮瘯楠屾柟娉旤/td> | Test Method for Surface Wax Coating on Corrugated Board |
| ANSI/ASTM D3708-1988 | 鍦ㄦ秱灞傚姞宸ヤ腑浣跨敤鐨勮湣鐨勯噸閲忕殑璇曢獙(05.03) | Weight of Wax Applied During Curtain Coating Operation, Test for (05.03) |
| ANSI/ASTM D4917-1997 | 鐢ㄦ按骞抽潰娉曟祴閲忛潪娑傚眰涔﹀啓鍗板埛绾稿姩鎬佸拰闈欐€佹懇鎿︾郴鏁扮殑鏂规硶 | Test Method for Coefficient of Static and Kinetic Friction of Uncoated Writing and Printing Paper by Use of the Horizontal Plane Method |
| ANSI/ASTM D4918-1997 | 鐢ㄥ€炬枩闈㈡硶娴嬭瘯鏃犳秱灞備功鍐欑焊鍜屽嵃鍒风焊闈欑（鎿︾郴鏁扮殑璇曢獙鏂规硶 | Test Method for Coefficient of Static Friction of Uncoated Writing and Printing Paper by Use of the Inclined Plane Method |
| ANSI/ASTM F1916-1998 | 鎷樺焦鐢ㄥ甫娑傚眰閾捐妭鏍呮爮缁撴瀯鍜屽渾鏌辩殑閾捐妭鏍呮爮绯荤粺閫夌敤瑙勮寖 | Specifications for Selecting Chain Link Barrier Systems with Coated Chain Link Fence Fabric and Round Posts for Detention Applications |
| ANSI/ASTM F2016-2000 | 瑙勫畾鑸逛綋缁撴瀯銆佽埦瑁呰澶囧拰娑傚眰鐨勮川閲忚姹傛儻渚婞/td> | Practice for Establihsing Shipbuiling Quality Requirements for Hull Structure, Outfitting and Coatings |
| ANSI/AWS A4.4M-2001 | 鐒婃帴鍔╃啍鍓傚拰鐢电剨鏉″姪鐔斿墏娑傚眰鍚按閲忔爣鍑嗘祴瀹氱▼搴廃/td> | Standard Procedures for Determination of Moisture Content of Welding Fluxes and Welding Electrode Flux Coverings |
| ANSI/AWWA C116/A 21.16-2003 | 渚涙按璁惧鐢ㄧ悆澧ㄩ摳閾佸拰鐏伴搧閰嶄欢鐨勫唴澶栬〃闈㈢殑闃叉姢鐔旇瀺鑳跺悎鐜哀娑傚眰 | Protective Fusion-Bonded Epoxy Coatings for the Interior and Exterior Surfaces of Ductile-Iron and Gray-Iron Fittings for Water Supply Service |
| ANSI/AWWA C203-2002 | 缁欐按閽㈢鐓ょ劍娌逛繚鎶ゆ秱灞傚拰鍐呰‖.鐑敤鎼摲鍜岃兌甯?/td> | Coal-Tar Protective Coatings and Linings for Steel Water Pipelines - Enamel and Tape - Hot-Applied |
| ANSI/AWWA C203a-1999 | 閽㈠埗渚涙按绠￠亾鐨勭叅鐒︽补淇濇姢娑傚眰鍜屽唴琛爣鍑?鎼摲鍜岃兌甯?鐑按 | Standard for Coal-Tar Protective Coatings and Linings for Steel Water Pipelines - Enamel and Tape - Hot Applied |
| ANSI/AWWA C205-2007 | 鍟嗙敤4鑻卞鍜?鑻卞浠ヤ笂閽㈡按绠＄殑姘存偿鐏版祮淇濇姢琛拰娑傚眰 | Cement-Mortar Protective Lining and Coating for Steel Water Pipe - 4 in and Larger - Shop Applied |
| ANSI/AWWA C209-2007 | 閽㈡按绠＄敤鐗规畩閮ㄤ欢銆佽繛鎺ヤ欢鍜岄厤浠剁殑澶栭儴鐢ㄤ綆娓╃甯︽秱灞侟/td> | Cold-Applied Tape Coatings for the Exterior of Special Sections, Connections, and Fittings for Steel Water Pipelines |
| ANSI/AWWA C210-2003 | 閽㈠埗姘寸鐨勫唴澶栧眰鐢ㄦ恫浣撶幆姘ф爲鑴傛秱灞傜郴缁烖/td> | Liquid-Epoxy Coating Systems for the Interior and Exterior of Steel Water Pipelines |
| ANSI/AWWA C213-2001 | 缁欐按閽㈢鐨勫唴銆佸灞傜啍鍖栫矘缁撶幆姘ф秱灞侟/td> | Fusion-Bonded Epoxy Coating for the Interior and Exterior of Steel Water Pipelines |
| ANSI/AWWA C213a-2002 | 閽㈠埗姘寸鍐呭鐨勭啍铻嶈兌鍚堢幆姘ф爲鑴傛秱灞侟/td> | Fusion-Bonded Epoxy Coating for the Interior and Exterior of Steel Water Pipelines |
| ANSI/AWWA C215-2004 | 閽㈠埗姘寸鐨勫灞傜敤鎸ゅ帇鑱氱儻鐑冩秱灞侟/td> | Extruded Polyolefin Coatings for the Exterior of Steel Water Pipelines |
| ANSI/AWWA C216-2007 | 缁欐按閽㈢鐢ㄤ笓鐢ㄩ儴浠躲€佽繛鎺ヤ欢鍜岄厤浠跺閮ㄥ彲鐑敹缂╀氦鑱旂殑鑱氱儻鐑冩秱灞侟/td> | Heat-Shrinkable Cross-Linked Polyolefin Coatings for the Exterior of Special Sections, Connections, and Fittings for Steel Water Pipelines |
| ANSI/AWWA C222-1999 | 閽㈡按绠″拰閰嶄欢鑱氭皑鍩虹敳閰镐箼閰唴鎴栧娑傚眰 | Polyurethane Coatings for the Interior and Exterior of Steel Water Pipe and Fittings |
| ANSI/AWWA C224-2007 | 閽㈡按绠°€佽繛鎺ヤ欢銆侀厤浠跺拰鐗规畩閮ㄤ欢鐨勫唴閮ㄥ拰澶栭儴鐢ㄥ凹榫?1鍩鸿仛閰拌兒娑傚眰绯荤粺 | Nylon-11-Based Polyamide Coating System for the Interior and Exterior of Steel Water Pipe, Connections, Fittings, and Special Sections |
| ANSI/AWWA C550-2005 | 闃€闂ㄥ拰缁欐按鏍撶敤闃叉姢鎬у唴閮ㄦ秱灞侟/td> | Protective Interior Coatings for Valves and Hydrants |
| ANSI/AWWA D102-2006 | 娑傚眰鐨勯挗鍒跺偍姘寸 | Coating Steel Water - Storage Tanks |
| ANSI/EIA 455-55A-1986 | 鍏夌氦娑傚眰鍑犱綍灏哄鐨勬祴閲忔柟娉旤/td> | Coating Geometry of Optical Fibers, Methods for Measuring the |
| ANSI/EIA-364-48A-2006 | 娴嬮噺鐢靛櫒杩炴帴鍣ㄤ欢鐨勯噾灞炴秱灞傚帤搴︾殑璇曢獙绋嬪簭 | Metallic Coating Thickness Measurement of Contacts Test Procedure for Electrical Connectors |
| ANSI/EIA/TIA 455-173-1990 | 鐢ㄥ厜绾や晶闈㈣娴嬫硶娴嬮噺娑傚眰鍑犱綍灏哄 | Coating Geometry Measurement for Optical Fiber Side View Method |
| ANSI/IEEE 1523-2002 | 鎴峰闄剁摲缁濈紭瀛愮敤瀹ゆ俯纭寲纭呮鑳舵秱灞傜殑搴旂敤銆佺淮鎶ゅ拰璇勪环鎸囧崡 | Guide for the Application, Maintenance, and Evaluation of Room Temperature Vulcanizing (RTV) Silicone Rubber Coatings for Outdoor Ceramic Insulators |
| ANSI/NFPA 703-2006 | 寤虹瓚鏉愭枡鐢ㄩ樆鐕冨鐞嗘湪鏉愬拰闃荤噧娑傚眰鏍囧噯 | Standard for Fire-Retardant Treated Wood and Fire-Retardant Coatings for Building Materials |
| ANSI/TIA-455-173-1990 | 鍏夌氦渚ч潰妫€鏌ユ硶閲囩敤鐨勬秱灞傚嚑浣曞舰鐘舵祴閲廃/td> | Coating Geometry Measurement for Optical Fiber Side View Method |
| ANSI/TIA-455-178-B-2003 | FOTP-178 IEC 60793-1-32 鍏夊绾ょ淮.绗?-32閮ㄥ垎:娴嬮噺鏂规硶鍜岃瘯楠岃绋?娑傚眰鍙墺绂绘€?/td> | FOTP-178 IEC 60793-1-32 Optical Fibers - Part 1-32: Measurement Methods and Test Procedures - Coating Stripability |
| ANSI/TIA-455-195-A-2003 | 鍏夊绾ょ淮娑傚眰鐨勫嚑浣曞娴嬮噺.FOTP195 | Coating Geometry Measurement for Optical Fiber - FOTP195 |
| ANSI/TIA/EIA 455-195-2000 | 鍏夌氦娑傚眰鐨勫嚑浣曢噺娴嬮噺.FOTP195 | Coating Geometry Measurement for Optical Fiber - FOTP195 |
| ANSI/UL 1715-2003 | 鍐呴儴娑傚眰鏉愭枡鐕冪儳璇曢獙鐨勫畨鍏ㄦ爣鍑咟/td> | Standard for Safety for Fire Test of Interior Finish Material |
| ASTM A 121-2007 | 閲戝睘娑傚眰纰崇礌閽㈠埡閽笣鐨勬爣鍑嗚鑼傸/td> | Standard Specification for Metallic-Coated Carbon Steel Barbed Wire |
| ASTM A 308/A 308M-2006 | 缁忕儹娴稿伐鑹烘秱灞傜殑闀€閾呴敗(閾呴敗鍚堥噾)閾佽杽鏉挎爣鍑嗚鑼傸/td> | Standard Specification for Steel Sheet, Terne (Lead-Tin Alloy) Coated by the Hot-Dip Process |
| ASTM A 630-2003 | 鐢甸晙閿¤杽鏉块敗娑傚眰閲嶉噺娴嬪畾鐨勬爣鍑嗚瘯楠屾柟娉旤/td> | Standard Test Methods for Determination of Tin Coating Weights for Electrolytic Tin Plate |
| ASTM A 754/A 754M-2006 | X灏勭嚎鑽у厜娑傚眰鍘氬害鐨勬爣鍑嗚瘯楠屾柟娉旤/td> | Standard Test Method for Coating Weight (Mass) of Metallic Coatings on Steel by X-Ray Fluorescence |
| ASTM A 792/A 792Ma-2006 | 缁忕儹娴稿伐鑹烘秱灞?5%閾濋攲鍚堥噾閾佽杽鏉挎潗鏍囧噯瑙勮寖 | Standard Specification for Steel Sheet, 55 % Aluminum-Zinc Alloy-Coated by the Hot-Dip Process |
| ASTM A 882/A 882Ma-2004 | 濉厖寮忕幆姘ф爲鑴傛秱灞傜殑7鑲￠搴斿姏閽㈢粸绾挎爣鍑嗚鑼傸/td> | Standard Specification for Filled Epoxy-Coated Seven-Wire Prestressing Steel Strand |
| ASTM A 899-1991 | 鐜哀娑傚眰閽笣 | Steel Wire, Epoxy-Coated |
| ASTM A 90/A 90M-2007 | 甯﹂攲鎴栭攲鍚堥噾娑傚眰鐨勯挗閾佸埗鍝佷笂娑傚眰閲嶉噺(璐ㄩ噺)鐢ㄦ爣鍑嗚瘯楠屾柟娉旤/td> | Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings |
| ASTM A 924/A 924M-2007 | 鐑蹈閲戝睘娑傚眰閽㈣杽鏉夸竴鑸姹傜殑鏍囧噯瑙勮寖 | Standard Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process |
| ASTM A 926-2003 | 娉㈢汗褰㈤噾灞炵鐢ㄦ秱灞傛潗鏂欒€愮（鎬ф瘮杈冪殑鏍囧噯璇曢獙鏂规硶 | Standard Test Method for Comparing the Abrasion Resistance of Coating Materials for Corrugated Metal Pipe |
| ASTM A 933/A 933M-2007 | 鍔犲浐鐢ㄨ仛姘箼鐑?PVC)娑傚眰閽笣鍜岀剨鎺ラ挗涓濈綉鐨勬爣鍑嗚鑼傸/td> | Standard Specification for Vinyl (PVC) Coated Steel Wire and Welded Wire Fabric for Reinforcement |
| ASTM A 950/A 950M-1999 | 鐔旀帴鐜哀鏍戣剛娑傚眰缁撴瀯閽㈡阿鍙嶅簲鍫嗗拰鍨涙澘鐨勬爣鍑嗚鑼傸/td> | Standard Specification for Fusion-Bonded Epoxy-Coated Structural Steel H-Piles and Sheet Piling |
| ASTM A 974-1997 | 鐒婄嚎绾ょ淮閲戝睘绛愬拰閲戝睘涓濈綉鐨勬爣鍑嗚鑼?(閲戝睘娑傚眰鎴栬仛姘箼鐑?PVC)娑傚眰) | Standard Specification for Welded Wire Fabric Gabions and Gabion Mattresses (Metallic Coated or Polyvinyl Chloride (PVC) Coated) |
| ASTM A 975-1997 | 鍙屽眰鍜屾壄杞綉鐪奸噾灞炵瓙鍜屾姢澧欏灚閲戝睘鍜屾秱灞傞挗绾挎垨鑱氭隘涔欑儻(PVC)閲戝睘娑傚眰閽㈢嚎 | Standard Specification for Double-Twisted Hexagonal Mesh Gabions and Revet Mattresses (Metallic-Coated Steel Wire or Metallic-Coated Steel Wire With Poly(Vinyl Chloride) (PVC) Coating) |
| ASTM A 976-2003 | 涓庣粷缂樿兘鍔涘拰搴旂敤鐩稿叧鐨勫鍚堢粷缂樻秱灞傜殑鏍囧噯鍒嗙被 | Standard Classification of Insulating Coatings by Composition, Relative Insulating Ability and Application |
| ASTM B 252-1992 | 鐢甸晙灞傚拰杞寲娑傚眰鐢ㄩ攲鍚堥噾鍘嬫ā閾镐欢鐨勫埗澶嘃/td> | Preparation of Zinc Alloy Die Castings for Electroplating and Conversion Coatings |
| ASTM B 588-1988 | 鐢ㄥ弻鏉熷共娑夋樉寰妧鏈祴閲忛€忔槑娑傚眰鎴栦笉閫忔槑娑傚眰鍘氬害鐨勮瘯楠屾柟娉旤/td> | Test Method for Measurement of Thickness of Transparent or Opaque Coatings by Double-Beam-Interference Microscope Technique |
| ASTM B 602-1988 | 閲戝睘鍙婃棤鏈烘秱灞傜殑灞炴€ф娊鏍疯瘯楠屾柟娉旤/td> | Test Method for Attribute Sampling of Metallic and Inorganic Coatings |
| ASTM B 681-1988 | 鐢ㄥ厜鎴潰鏄惧井闀滄祴閲忛摑闃虫瀬闀€灞傚帤搴﹀強涓嶉€忔槑琛ㄩ潰鐨勫叾瀹冮€忔槑娑傚眰鍘氬害鐨勮瘯楠屾柟娉旤/td> | Test Method for Measurement of Thickness of Anodic Coatings on Aluminum and of Other Transparent Coatings on Opaque Surfaces Using the Light-Section Microscope |
| ASTM B 733-2004 | 閲戝睘琛ㄩ潰鑷偓鍖?鏃犵數)闀嶇７娑傚眰鏍囧噯瑙勮寖 | Standard Specification for Autocatalytic (Electroless) Nickel-Phosphorus Coatings on Metal |
| ASTM B 735-2006 | 鐢ㄧ閰歌捀姹芥祴璇曢噾灞炲熀浣撲笂閲戞秱灞傚瓟闅欑巼鐨勬爣鍑嗚瘯楠屾柟娉旤/td> | Standard Test Method for Porosity in Gold Coatings on Metal Substrates by Nitric Acid Vapor |
| ASTM B 748-1990 | 鐢ㄦ壂鎻忕數瀛愭樉寰暅娴嬮噺妯埅闈㈡祴瀹氶噾灞炴秱灞傚帤搴︾殑鏂规硶 | Test Method for Measurement of Thickness of Metallic Coatings by Measurement of Cross Section with a Scanning Electron Microscope |
| ASTM B 750-2007 | 鐑蹈娑傚眰鐢ㄩ敪閾佹ā鍨嬩腑GALFAN(閿?5%閾?鍚搱绋€鍦?鍚堥噾鐨勬爣鍑嗚鑼傸/td> | Standard Specification for GALFAN (Zinc-5 % Aluminum-Mischmetal) Alloy in Ingot Form for Hot-Dip Coatings |
| ASTM B 762-1990 | 閲戝睘娑傚眰鍜屾棤鏈虹墿娑傚眰鐨勪笉鍚屾娊鏍饵/td> | Variables Sampling of Metallic and Inorganic Coatings |
| ASTM B 766-1986 | 闀夌數娌夌Н娑傚眰鏍囧噯瑙勮寖 | Standard Specification for Electrodeposited Coatings of Cadmium |
| ASTM B 767-1988 | 鐢ㄩ噸閲忓垎鏋愭硶鍜屽叾瀹冨寲瀛﹀垎鏋愭硶娴嬪畾鐢垫矇绉秱灞傚強鐩稿叧娑傚眰鍗曚綅闈㈢Н鐨勮川閲廃/td> | Determining Mass Per Unit Area of Electrodeposited and Related Coatings by Gravimetric and Other Chemical Analysis Procedures |
| ASTM B 798-1995 | 鐢ㄥ嚌鑳朵綋鐢佃氨娉曟祴瀹氶噾灞炲熀鐗╀笂閲戞垨閽秱灞傚瓟闅欏害鐨勬爣鍑嗚瘯楠屾柟娉旤/td> | Standard Test Method for Porosity in Gold or Palladium Coatings on Metal Substrates by Gel-Bulk Electrography |
| ASTM B 809-1995 | 鐢ㄦ箍纭粍钂告皵("纭粍鍗?quot;)浣滈噾灞炴秱灞備腑瀛旈殭鐜囨祴璇曠殑鏍囧噯璇曢獙鏂规硶 | Standard Test Method for Porosity in Metallic Coatings by Humid Sulfur Vapor ("Flowers-of-Sulfur") |
| ASTM B 866-1995 | 鐢ㄨ仛纭寲鐗╂蹈鍏ユ硶娴嬭瘯閲戝睘娑傚眰涓€荤柕鐐瑰拰鏈烘鎹熷潖鐨勬爣鍑嗚瘯楠屾柟娉旤/td> | Standard Test Method for Gross Defects and Mechanical Damage in Metallic Coatings by Polysulfide Immersion |
| ASTM B 879-1997 | 闀佸拰闀佸悎閲戜笂闈炵數瑙ｈ川杞崲娑傚眰鐨勬爣鍑嗚鑼傸/td> | Standard Practice for Applying Non-Electrolytic Conversion Coatings on Magnesium and Magnesium Alloys |
| ASTM B 893-1998 | 宸ョ▼搴旂敤纭秱灞傞槼鏋佹哀鍖栬鑼傸/td> | Specification for Hard-Coat Anodizing of Magnesium for Engineering Applications |
| ASTM B 940-2005 | 鍦ㄩ攲鍜岄晧琛ㄩ潰闈為摤閰告秱灞傝瘯楠岀殑鏍囧噯瀹炴柦瑙勭▼ | Standard Practice for Testing Non-Chromate Coatings on Zinc and Cadmium Surfaces |
| ASTM C 1048-2004 | 鐑鐞嗗钩鏉跨幓鐠冪殑鏍囧噯瑙勮寖.HS鍜孎T绫绘秱灞傚拰鏃犳秱灞傜幓鐠傸/td> | Standard Specification for Heat-Treated Flat Glass - Kind HS, Kind FT Coated and Uncoated Glass |
| ASTM C 1321-2004 | 寤虹瓚鐗╁唴閮ㄨ緪灏勬帶鍒舵秱灞傜郴缁?IRCCS)鐨勫畨瑁呭拰浣跨敤鐨勬爣鍑嗗疄鏂借绋婞/td> | Standard Practice for Installation and Use of Interior Radiation Control Coating Systems (IRCCS) in Building Construction |
| ASTM C 1483-2004 | 寤虹瓚鐗╁閮ㄩ槻澶槼杈愬皠娑傚眰鐨勬爣鍑嗚鑼傸/td> | Standard Specification for Exterior Solar Radiation Control Coatings on Buildings |
| ASTM C 1624-2005 | 鐢ㄥ畾閲忓崟鐐瑰垝鐥曡瘯楠屾祴瀹氶櫠鐡锋秱灞傜矘缁撳己搴﹀拰鏈烘鎹熷潖绫诲瀷鐨勬爣鍑嗚瘯楠屾柟娉旤/td> | Standard Test Method for Adhesion Strength and Mechanical Failure Modes of Ceramic Coatings by Quantitative Single Point Scratch Testing |
| ASTM C 216a-2007 | 娑傚眰鐮?鐢辩矘鍦熸垨椤靛博鍒堕€犵殑瀹炲績鐮屽潡)鐨勬爣鍑嗚鑼傸/td> | Standard Specification for Facing Brick (Solid Masonry Units Made from Clay or Shale) |
| ASTM C 419-1994 | 鑳舵偿缁濈儹娑傚眰鐨勮瘯鏍峰埗浣滀笌鍏绘姢鐨勬爣鍑嗗疄鏂芥寚鍗桙/td> | Standard Practice for Making and Curing Test Specimens of Mastic Thermal Insulation Coatings |
| ASTM C 536-1983 | 閽㈠埗璁惧鐜荤拑娑傚眰鐨勮繛缁€х數娴嬭瘯鐨勬爣鍑嗚瘯楠屾柟娉旤/td> | Standard Test Method for Continuity of Coatings in Glassed Steel Equipment by Electrical Testing |
| ASTM C 537-1987 | 鐢ㄩ珮鍘嬫硶娴嬭瘯閽㈠埗鍙嶅簲璁惧鐜荤拑娑傚眰鍙潬鎬х殑鏍囧噯璇曢獙鏂规硶 | Standard Test Method for Reliability of Glass Coatings on Glassed Steel Reaction Equipment by High Voltage |
| ASTM C 633-2001 | 鐑柗娑傚眰鐨勭矘闄勫姏鎴栫矘缁撳己搴︾殑鏍囧噯璇曢獙鏂规硶 | Standard Test Method for Adhesion or Cohesion Strength of Thermal Spray Coatings |
| ASTM C 703-1972 | 閾濆埗鎼摲娑傚眰鐨勬姉鑴辫惤璇曢獙鏂规硶 | Test Methods for Spalling Resistance of Porcelain Enameled Aluminum |
| ASTM C 743-1987 | 鎼摲娑傚眰杩炵画鎬х殑鏍囧噯璇曢獙鏂规硶 | Standard Test Method for Continuity of Porcelain Enamel Coatings |
| ASTM C 884/C 884M-1998 | 娣峰嚌鍦熷拰鐜哀鏍戣剛娑傚眰闂寸儹瀹规€х殑鏍囧噯璇曢獙鏂规硶 | Standard Test Method for Thermal Compatibility Between Concrete and an Epoxy-Resin Overlay |
| ASTM D 1005-1995 | 鐢ㄥ崈鍒嗗昂娴嬮噺鏈夋満娑傚眰骞茶啘鍘氬害鐨勬爣鍑嗚瘯楠屾柟娉旤/td> | Standard Test Method for Measurement of Dry-Film Thickness of Organic Coatings Using Micrometers |
| ASTM D 1014-2002 | 閲戝睘鍩鸿川娑傛枡鍜屾秱灞傜殑瀹ゅ鏆撮湶鐨勬爣鍑嗚瘯楠岃绋婞/td> | Standard Practice for Conducting Exterior Exposure Tests of Paints and Coatings on Metal Substrates |
| ASTM D 1053a-1992 | 姗¤兌鎬ц兘鐨勬爣鍑嗚瘯楠屾柟娉?浣庢俯涓嬪浐鍖曻鎸犳€ц仛鍚堢墿鍜屾秱灞傜粐鐗?/td> | Standard Test Methods for Rubber Property-Stiffening at Low Temperatures: Flexible Polymers and Coated Fabrics |
| ASTM D 1187-1997 | 閲戝睘淇濇姢娑傚眰鐢ㄦ播娓呬钩娑茬殑鏍囧噯瑙勮寖 | Standard Specification for Asphalt-Base Emulsions for Use as Protective Coatings for Metal |
| ASTM D 1188-2007 | 浣跨敤娑傚眰鏍峰搧鐨勫帇瀹炴播闈掓贩鍚堟枡鐨勬瘺浣撶Н姣旈噸鍜屽瘑搴︾殑鏍囧噯璇曢獙鏂规硶 | Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Coated Samples |
| ASTM D 1212-1991 | 鏈夋満娑傚眰婀胯啘鍘氬害鐨勬祴璇曟柟娉旤/td> | Test Methods for Measurement of Wet Film Thickness of Organic Coatings |
| ASTM D 1227-1995 | 灞嬮潰淇濇姢娑傚眰鐢ㄤ钩鍖栨播闈掔殑鏍囧噯瑙勮寖 | Standard Specification for Emulsified Asphalt Used as a Protective Coating for Roofing |
| ASTM D 1458-2001 | 鐢电粷缂樼敤瀹屽叏纭寲纭呮鑳舵秱灞傜殑鐜荤拑甯冧笌鐜荤拑甯︾殑鏍囧噯璇曢獙鏂规硶 | Standard Test Methods for Fully Cured Silicone Rubber-Coated Glass Fabric and Tapes for Electrical Insulation |
| ASTM D 1459-1993 | 鐢电粷缂樼敤纭呮竻婕嗘秱灞傜殑鐜荤拑甯冨拰鐜荤拑甯︾殑鏍囧噯瑙勮寖 | Standard Specification for Silicone Varnished Glass Cloth and Tape for Electrical Insulation |
| ASTM D 1474-1998 | 鏈夋満娑傚眰鍘嬬棔纭害鐨勮瘯楠屾柟娉旤/td> | Test Methods for Indentation Hardness of Organic Coatings |
| ASTM D 16-2007 | 娑傛枡銆佺浉鍏虫秱灞傘€佹潗鏂欏拰搴旂敤鐨勬爣鍑嗘湳璇?/td> | Standard Terminology for Paint, Related Coatings, Materials, and Applications |
| ASTM D 1653-2003 | 鏈夋満娑傚眰钖勮啘姘磋捀姘旀笚閫忔€ф爣鍑嗚瘯楠屾柟娉旤/td> | Standard Test Methods for Water Vapor Transmission of Organic Coating Films |
| ASTM D 1735-2004 | 鐢ㄦ按闆句华杩涜娑傚眰鑰愭按鎬ц瘯楠岀殑鏍囧噯瑙勭▼ | Standard Practice for Testing Water Resistance of Coatings Using Water Fog Apparatus |
| ASTM D 1931-1999 | 鐢电粷缂樼敤瀹屽叏纭寲鐨勭姗¤兌娑傚眰鐜荤拑甯冨拰鐜荤拑甯︾殑鏍囧噯瑙勮寖 | Standard Specification for Fully Cured Silicone Rubber-Coated Glass Fabric and Tapes for Electrical Insulation |
| ASTM D 2136-2002 | 娑傚眰缁囩墿鐨勪綆娓╁集鏇叉爣鍑嗚瘯楠屾柟娉旤/td> | Standard Test Method for Coated Fabrics-Low-Temperature Bend Test |
| ASTM D 2137-2005 | 姗¤兌鐗规€х殑鏍囧噯璇曢獙鏂规硶.鎸犳€ц仛鍚堢墿鍜屾秱灞傜粐鐗╃殑鑴嗗寲鐐更/td> | Standard Test Methods for Rubber Property-Brittleness Point of Flexible Polymers and Coated Fabrics |
| ASTM D 2197-1998 | 鐢ㄥ埉鏉垮紡绮樺悎璇曢獙鍣ㄦ祴瀹氭湁鏈烘秱灞傜矘鍚堟€х殑璇曢獙鏂规硶 | Standard Test Method for Adhesion of Organic Coatings by Scrape Adhesion |
| ASTM D 2247-2002 | 娑傚眰鍦?00%鐩稿婀垮害涓嬭€愭按鎬х殑璇曢獙鐨勬爣鍑嗘搷浣滆绋婞/td> | Standard Practice for Testing Water Resistance of Coatings in 100% Relative Humidity |
| ASTM D 2248a-2001 | 鏈夋満娑傚眰鐨勮€愭礂娑ゅ墏鎬ц兘鐨勬爣鍑嗚鑼傸/td> | Standard Practice for Detergent Resistance of Organic Finishes |
| ASTM D 2336-1999 | 娑傛枡鍘傚娑傝浜庢湪鍒跺搧鐨勬秱灞傜敱娑叉€佽嚦鍥烘€佺殑鏍囧噯鎸囧崡 | Standard Guide for Specifying Factory Applied Wood Coatings |
| ASTM D 2370-1998 | 鏈夋満娑傚眰鎶楁媺鎬ц兘璇曢獙鏂规硶 | Standard Test Method for Tensile Properties of Organic Coatings |
| ASTM D 2454-1995 | 娴嬪畾鐑樼剻杩囧害瀵规湁鏈烘秱灞傜殑褰卞搷鐨勬爣鍑嗘搷浣滆绋婞/td> | Standard Practice for Determining the Effect of Overbaking on Organic Coatings |
| ASTM D 268-2001 | 娑傛枡鍙婂叾鐩稿叧娑傚眰鍜屽師鏂欑敤鎸ュ彂鎬ф憾鍓傚強鍖栧涓棿浣撶殑鎶芥牱鍜屾祴璇曠殑鏍囧噯鎸囧崡 | Standard Guide for Sampling and Testing Volatile Solvents and Chemical Intermediates for Use in Paint and Related Coatings and Material |
| ASTM D 2697-2003 | 閫忔槑鎴栫潃鑹叉秱灞備腑涓嶆尌鍙戠墿浣撶Н鐨勬爣鍑嗘祴璇曟柟娉旤/td> | Standard Test Method for Volume Nonvolatile Matter in Clear or Pigmented Coatings |
| ASTM D 2793-1999 | 鏈ㄦ澘鍒跺簳鏉愪笂鏈夋満娑傚眰鎶楃矘杩炴€х殑鏍囧噯璇曢獙鏂规硶 | Standard Test Method for Block Resistance of Organic Coatings on Wood Panel Substrates |
| ASTM D 2794-1993 | 鏈夋満娑傚眰鎶楀揩閫熷舰鍙?鍐插嚮)浣滅敤鐨勬爣鍑嗚瘯楠屾柟娉旤/td> | Standard Test Method for Resistance of Organic Coatings to the Effects of Rapid Deformation (Impact) |
| ASTM D 2803-2003 | 閲戝睘鏈夋満娑傚眰鑰愪笣鐘堕攬铓€鐨勮瘯楠岀敤鏍囧噯鎸囧崡 | Standard Guide for Testing Filiform Corrosion Resistance of Organic Coatings on Metal |
| ASTM D 2824-2006 | 鏃犵氦缁村寮恒€佺煶妫夌氦缁村寮哄拰鏃犵煶妫夌殑绾ょ淮澧炲己鐨勫～鍏呴摑棰滄枡鐨勬播闈掑眿闈㈡秱灞傛爣鍑嗚鑼傸/td> | Standard Specification for Aluminum-Pigmented Asphalt Roof Coatings, Nonfibered, Asbestos Fibered, and Fibered without Asbestos |
| ASTM D 2967-2007 | 绮夋湯娑傚眰瑙掕惤鏁峰眰鐨勬爣鍑嗚瘯楠屾柟娉旤/td> | Standard Test Method for Corner Coverage of Powder Coatings |
| ASTM D 3003-2001 | 閲戝睘琛簳琛ㄩ潰鏈夋満娑傚眰鑰愬帇鍔涙枒杩瑰拰鎶楃矘杩炴€ф爣鍑嗚瘯楠屾柟娉旤/td> | Standard Test Method for Pressure Mottling and Blocking Resistance of Organic Coatings on Metal Substrates |
| ASTM D 3236-1988 | 鐑啍绮樺悎鍓傚強娑傚眰鏉愭枡琛ㄨ绮樺害鐨勬爣鍑嗚瘯楠屾柟娉旤/td> | Standard Test Method for Apparent Viscosity of Hot Melt Adhesives and Coating Materials |
| ASTM D 3259-1995 | 绾㈠绾挎祴瀹氭湪鍒跺搧娑傚眰鍥哄寲鏈熼棿娓╁害鐨勬爣鍑嗗疄鏂借绋婞/td> | Standard Practice for Infrared Determination of the Temperature of Applied Coatings on Wood Products During the Curing Cycle |
| ASTM D 3260-2001 | 閫傜敤浜庡伐鍘傜殑鍘嬪埗閾濆埗鍝侀€忔槑娑傚眰鐨勮€愰吀鍜岃€愮伆娴嗘爣鍑嗚瘯楠屾柟娉旤/td> | Standard Test Method for Acid and Mortar Resistance of Factory-Applied Clear Coatings on Extruded Aluminum Products |
| ASTM D 3273-2000 | 鐜妯℃嫙瀹ゅ唴娑傚眰琛ㄩ潰鐨勬姉闇夎弻鐢熼暱鏍囧噯璇曢獙鏂规硶 | Standard Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber |
| ASTM D 3281-1984 | 鐢ㄥ啿鍑昏竟缂樺集鏇蹭华娴嬪畾闄勫姞鏈夋満娑傚眰鍙垚褰㈡€х殑璇曢獙鏂规硶 | Test Method for Formability of Attached Organic Coatings with Impact-Wedge Bend Apparatus |
| ASTM D 3361-2001 | 鐢ㄩ潪婊ゅ厜纰冲姬鍨嬭缃祴瀹氭秱鏂欏拰鏈夊叧娑傚眰鐨勬爣鍑嗗疄鏂借绋婞/td> | Standard Practice for Unfiltered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings |
| ASTM D 3389-2005 | 娑傚眰缁囩墿鑰愮（鎬х殑鏍囧噯璇曢獙鏂规硶(鏃嬭浆骞冲彴鍙屽ご纾ㄨ殌鏈? | Standard Test Method for Coated Fabrics Abrasion Resistance (Rotary Platform, Double-Head Abrader) |
| ASTM D 3393-1991 | 娑傚眰缁囩墿.鑰愭按鎬?/td> | Coated Fabrics - Waterproofness |
| ASTM D 3450-2000 | 鍐呯敤寤虹瓚娑傚眰鍙礂鎬х殑鏍囧噯璇曢獙鏂规硶 | Standard Test Method for Washability Properties of Interior Architectural Coatings |
| ASTM D 3451-2006 | 璇曢獙娑傚眰绮夋湯鍜岀矇鏈秱灞傜殑鏍囧噯鎸囧崡 | Standard Guide for Testing Coating Powders and Powder Coatings |
| ASTM D 3625-1996 | 鐢ㄥ紑姘存祴璇曟按瀵规播闈掓秱灞傞泦鏂欑殑褰卞搷鐨勬爣鍑嗘搷浣滆绋婞/td> | Standard Practice for Effect of Water on Bituminous-Coated Aggregate Using Boiling Water |
| ASTM D 3630-1989 | 娴嬪畾淇濇姢娑傚眰涓湁瀹虫垚鍒嗙殑鏂规硶 | Determining Constituents Classified as Hazardous Contained in Protective Coatings |
| ASTM D 3792-2005 | 鐩存帴娉ㄥ叆寮忔皵鐩歌壊璋辨硶娴嬪畾娑傚眰涓按鍚噺鐨勬爣鍑嗚瘯楠屾柟娉旤/td> | Standard Test Method for Water Content of Coatings by Direct Injection Into a Gas Chromatograph |
| ASTM D 3843-2000 | 鏍歌缃槻鎶ゆ秱灞傝川閲忎繚璇佺殑鏍囧噯瀹炴柦瑙勭▼ | Standard Practice for Quality Assurance for Protective Coatings Applied to Nuclear Facilities |
| ASTM D 3911-2003 | 璁捐鍩烘湰浜嬫晠(DBA)鐨勬ā鎷熸潯浠朵笅璇勪环杞绘按鏍哥數绔欑敤娑傚眰鐨勬爣鍑嗚瘯楠屾柟娉旤/td> | Standard Test Method for Evaluating Coatings Used in Light-Water Nuclear Power Plants at Simulated Design Basis Accident (DBA) Conditions |
| ASTM D 3912-1995 | 杞绘按鏍哥數绔欑敤娑傚眰鑰愬寲瀛︽€х殑鏍囧噯璇曢獙鏂规硶 | Standard Test Method for Chemical Resistance of Coatings Used in Light-Water Nuclear Power Plants |
| ASTM D 3925-2002 | 娑叉€佹秱鏂欏拰鐩稿叧棰滄枡娑傚眰鐨勬娊鏍锋爣鍑嗗疄鏂借绋婞/td> | Standard Practice for Sampling Liquid Paints and Related Pigmented Coatings |
| ASTM D 3949-1999 | 鐢电粷缂樼敤鐜荤拑娑傚眰缁囩墿鐨勬爣鍑嗚鑼傸/td> | Standard Specification for Coated Glass Fabrics Used for Electrical Insulation |
| ASTM D 3960-2005 | 娑傛枡鍙婄浉鍏虫秱灞備腑鎸ュ彂鎬ф湁鏈哄寲鍚堢墿鍚噺娴嬪畾鐨勬爣鍑嗗疄鏂借鑼傸/td> | Standard Practice for Determining Volatile Organic Compound (VOC) Content of Paints and Related Coatings |
| ASTM D 3964-2004 | 琛ㄩ潰娴嬮噺鐢ㄦ秱灞傝瘯鏍风殑閫夋嫨鐨勬爣鍑嗚绋婞/td> | Standard Practice for Selection of Coating Specimens for Appearance Measurements |
| ASTM D 4005-1992 | 濉戞枡娑傝缁囩墿.鑱氭隘涔欑儻寮ユ暎娑傚眰鐨勬憾瑙ｅ害鐨勮瘯楠屾柟娉旤/td> | Standard Test Method for Plastic-Coated Fabrics - Completeness of Fusion of PVC Dispersion Coatings |
| ASTM D 4060-2007 | 鐢ㄦ嘲浼皵纾ㄨ殌鏈烘祴瀹氭湁鏈烘秱灞傝€愮（鎬х殑鏍囧噯璇曢獙鏂规硶 | Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser |
| ASTM D 4061-1994 | 骞抽潰娑傚眰鍥炲鍙嶅皠鐨勬爣鍑嗚瘯楠屾柟娉旤/td> | Standard Test Method for Retroreflectance of Horizontal Coatings |
| ASTM D 4082-1995 | 违灏勭嚎瀵硅交姘存牳鐢电珯鐢ㄦ秱灞傚奖鍝嶇殑鏍囧噯璇曢獙鏂规硶 | Standard Test Method for Effects of Gamma Radiation on Coatings for Use in Light-Water Nuclear Power Plants |
| ASTM D 4109a-1995 | 鐢蜂汉鍙婄敺瀛╃敤鏈虹粐杩炶。瑁ゅ伐浣滄湇銆佸姵鍔ㄥ竷宸ヤ綔鏈嶃€佸伐瑁呰￥鍙婅溅闂存秱灞傜粐鐗╃殑鏍囧噯鎬ц兘瑙勮寖 | Standard Performance Specification for Mens and Boys Woven Coverall, Dungaree, Overall, and Shop-Coat Fabrics |
| ASTM D 4118-2001 | 濡囧コ鐢ㄦ満缁囧伐浣滄湇銆佸姵鍔ㄥ竷銆佸伐瑁呰￥鍙婅溅闂存秱灞傜粐鐗╃殑鏍囧噯鎬ц兘瑙勮寖 | Standard Performance Specification for Women's Woven Coverall, Dungaree, Overall, and Shop Coat Fabrics |
| ASTM D 4138a-2007 | 鐢ㄦí鎴潰鍒嗗壊鐮村潖娉曟祴瀹氶槻鎶ゆ秱灞傜郴缁熷共鑶滃帤搴︾殑鏍囧噯瀹炴柦瑙勭▼ | Standard Practices for Measurement of Dry Film Thickness of Protective Coating Systems by Destructive, Cross-Sectioning Means |
| ASTM D 4141-2007 | 娑傚眰鐨勯粦绠卞拰闃冲厜闆嗕腑鏆撮湶澶勭悊鐢ㄦ爣鍑嗗疄鏂借绋婞/td> | Standard Practice for Conducting Black Box and Solar Concentrating Exposures of Coatings |
| ASTM D 4144-1994 | 绱绾垮浐鍖栨秱灞傚寘瑁呰€愪箙鎬ц瘎浼扮殑鏍囧噯璇曢獙鏂规硶 | Standard Test Method for Estimating Package Stability of Coatings for Ultraviolet Curing |
| ASTM D 4145-1983 | 棰勬秱鏉挎秱灞傛煍闊ф€ц瘯楠屾柟娉旤/td> | Test Method for Coating Flexibility of Prepainted Sheet |
| ASTM D 4146-1996 | 閽㈡潗琛ㄩ潰瀵岄攲搴曟紗/閾吀鐩愬鍚堟秱灞傚彲鎴愬舰鎬х殑鏍囧噯璇曢獙鏂规硶 | Standard Test Method for Formability of Zinc-Rich Primer/Chromate Complex Coatings on Steel |
| ASTM D 4147-1999 | 绾跨粫鏀剁缉鐢ㄧ嚎鍦堟秱灞傜殑閫傜敤瑙勭▼ | Applying Coil Coatings Using the Wire-Wound Drawdown Bar |
| ASTM D 4227-2005 | 娣峰嚌鍦熻〃闈㈡秱灞傛秱鍒锋补婕嗗伐鐨勮祫鏍艰瘎瀹氱殑鏍囧噯瀹炴柦瑙勭▼ | Standard Practice for Qualification of Coating Applicators for Application of Coatings to Concrete Surfaces |
| ASTM D 4228-2005 | 閽㈣〃闈㈡秱灞傛秱鍒锋补婕嗗伐鐨勮祫鏍艰瘎瀹氱殑鏍囧噯瀹炴柦瑙勭▼ | Standard Practice for Qualification of Coating Applicators for Application of Coatings to Steel Surfaces |
| ASTM D 4457-2002 | 鐩存帴娉ㄥ叆姘旂浉鑹茶氨浠硶娴嬪畾娑傛枡鍙婃秱灞備腑浜屾隘鐢茬兎鍜?,1,1-涓夋隘涔欑兎鐨勬爣鍑嗚瘯楠屾柟娉旤/td> | Standard Test Method for Determination of Dichloromethane and 1,1,1-Trichloroethane in Paints and Coatings by Direct Injection into a Gas Chromatograph |
| ASTM D 4479-2007 | 鏃犵煶妫夌殑娌ヨ〃灞嬮潰娑傚眰鐢ㄦ爣鍑嗚鑼傸/td> | Standard Specification for Asphalt Roof Coatings - Asbestos-Free |
| ASTM D 4537a-2004 | 鏍歌鏂芥秱灞傚伐浣滄楠屼汉鍛樼殑璧勬牸鍜岃璇佽€冩牳绋嬪簭纭珛鐨勬爣鍑嗘寚鍗桙/td> | Standard Guide for Establishing Procedures to Qualify and Certify Personnel Performing Coating WoRK Inspection in Nuclear Facilities |
| ASTM D 4541-2002 | 鐢ㄦ墜鎻愬紡绮樺悎璇曢獙浠祴瀹氭秱灞傝劚钀藉己搴︾殑鏍囧噯璇曢獙鏂规硶 | Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers |
| ASTM D 4585-2007 | 鐢ㄥ彈鎺у喎鍑濇硶娴嬭瘯娑傚眰鑰愭按鎬х殑鏍囧噯瀹炴柦瑙勭▼ | Standard Practice for Testing Water Resistance of Coatings Using Controlled Condensation |
| ASTM D 4587-2005 | 娑傛枡鍙婄浉鍏虫秱灞傜殑鑽у厜绱绾胯仛鍚堟洕鍏夌殑鏍囧噯瀹炴柦瑙勭▼ | Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings |
| ASTM D 4610-1998 | 娴嬪畾娑傛枡鍜岀浉鍏虫秱灞備笂寰敓鐗?鐪熻弻鎴栬椈绫?鐨勫瓨鍦ㄥ強娓呴櫎鐨勬爣鍑嗘寚鍗桙/td> | Standard Guide for Determining the Presence of and Removing Microbial (Fungal or Algal) Growth on Paint and Related Coatings |
| ASTM D 4712a-1987 | 妫€楠屽伐涓氱敤姘寸殑鏍囧噯鎸囧崡.鍙繕鍘熸秱灞侟/td> | Standard Guide for Testing Industrial Water-Reducible Coatings |
| ASTM D 4851-2007 | 寤虹瓚鐢ㄦ秱灞傜粐鐗╁拰灞傚彔缁囩墿鐨勬爣鍑嗚瘯楠屾柟娉旤/td> | Standard Test Methods for Coated and Laminated Fabrics for Architectural Use |
| ASTM D 4917-1997 | 鐢ㄦ按骞抽潰娉曟祴璇曟棤娑傚眰涔﹀啓绾稿拰鍗板埛绾哥殑闈欑（鎿﹀拰鍔ㄧ（鎿︾郴鏁扮殑鏍囧噯璇曢獙鏂规硶 | Standard Test Method for Coefficient of Static and Kinetic Friction of Uncoated Writing and Printing Paper by Use of the Horizontal Plane Method |
| ASTM D 4918-1997 | 鐢ㄥ€炬枩闈㈡硶娴嬭瘯鏃犳秱灞備功鍐欑焊鍜屽嵃鍒风焊闈欑（鎿︾郴鏁扮殑鏍囧噯璇曢獙鏂规硶 | Standard Test Method for Coefficient of Static Friction of Uncoated Writing and Printing Paper by Use of the Inclined Plane Method |
| ASTM D 4939-1989 | 鍦ㄥぉ鐒舵捣姘翠腑浣胯埞鍙槻姹℃秱灞傞伃鍙楃敓鐗╂薄鍨㈠拰娴佷綋鍓垏鍔涚殑璇曢獙鏂规硶 | Test Method for Subjecting Marine Antifouling Coating to Biofouling and Fluid Shear Forces in Natural Seawater |
| ASTM D 5009-2002 | 瀹為獙瀹ゆ潯浠朵笅璇勪及鍜屾瘮杈冨柗娑傚眰浼犻€佹晥鐜囩殑鏍囧噯璇曢獙鏂规硶 | Standard Test Method for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under Laboratory Conditions |
| ASTM D 5031-2001 | 浣跨敤灏侀棴纰冲姬鍏夌伅鏇濋湶浠娑傛枡鍙婃湁鍏虫秱灞傝繘琛岃瘯楠岀殑鏍囧噯瀹炴柦瑙勭▼ | Standard Practice for Enclosed Carbon-Arc Exposure Tests of Paint and Related Coatings |
| ASTM D 5043-2004 | 娑傚眰鐜板満璇嗗埆鐨勬爣鍑嗚绋婞/td> | Standard Practice for Field Identification of Coatings |
| ASTM D 5065-2007 | 閽㈣〃闈㈣€佸寲娑傚眰鏉′欢鐨勮瘎浼扮敤鏍囧噯鎸囧崡 | Standard Guide for Assessing the Condition of Aged Coatings on Steel Surfaces |
| ASTM D 5087-2002 | 娴嬪畾鍚憾鍓傛苯杞︽秱灞傞噴鏀剧殑鍜屽湪鎸ュ彂鏈夋満鍖栧悎鐗╂帶鍒惰缃腑鍙櫎鍘荤殑鎸ュ彂鏈夋満鍖栧悎鐗╂€婚噺鐨勬爣鍑嗚瘯楠屾柟娉旤/td> | Standard Test Method for Determining Amount of Volatile Organic Compound (VOC) Released from Solventborne Automotive Coatings and Available for Removal in a VOC Control Device (Abatement) |
| ASTM D 5108-1990 | 娴锋按涓槻姹℃秱灞備綋绯绘湁鏈虹墿鎵╂暎閫熷害鐨勬祴璇曟柟娉旤/td> | Test Method for Organotin Release Rates of Antifouling Coating Systems in Sea Water |
| ASTM D 5139-1990 | 鏍哥數鍘傜敤娑傚眰瀹氶噺妫€鏌ョ敤鐨勬牱鍝佸埗澶囨爣鍑嗚鑼傸/td> | Standard Specification for Sample Preparation for Qualification Testing of Coatings to be Used in Nuclear Power Plants |
| ASTM D 5161a-2004 | 纭畾娑傚眰鍜岄暥琛綔涓?閲戝睘琛噷)妫€楠岃姹傜殑鏍囧噯鎸囧崡 | Standard Guide for Specifying Inspection Requirements for Coating and Lining Work (Metal Substrates) |
| ASTM D 5163a-2005 | 鏍哥數鍘傝繍琛屾椂浣跨敤鐨処绾ф秱灞傛€ц兘鐩戞祴绋嬪簭鍒跺畾鐨勬爣鍑嗘寚鍗桙/td> | Standard Guide for Establishing Procedures to Monitor the Performance of Service Level I Coatings in an Operating Nuclear Power Plant |
| ASTM D 5179-2002 | 鐩存帴鎶楁媺璇曢獙娴嬪畾鏈夋満娑傚眰鍜屽鏂欏熀璐ㄧ殑绮樼潃鍔涚殑鏍囧噯璇曢獙鏂规硶 | Standard Test Method for Measuring Adhesion of Organic Coatings to Plastic Substrates by Direct Tensile Testing |
| ASTM D 5193/D 5193M-1993 | 娑傚眰缁囩墿鐨勮瘯楠屾柟娉?绌烘皵淇濇寔鎬?/td> | Test Method for Coated Fabrics - Air Retention |
| ASTM D 522a-1993 | 娑傝鏈夋満娑傚眰鐨勮姱鏉嗗集鏇茶瘯楠岀殑鏍囧噯璇曢獙鏂规硶 | Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings |
| ASTM D 5382-2002 | 绮夋湯娑傚眰鍏夊鐗规€ц瘎瀹氭爣鍑嗘寚鍗桙/td> | Standard Guide to Evaluation of Optical Properties of Powder Coatings |
| ASTM D 5479-1994 | 閮ㄥ垎娴稿叆鐨勮埞鑸舵秱灞傜殑鑰愮敓鐗╂薄鍨㈣瘯楠岀殑鏍囧噯瑙勭▼ | Standard Practice for Testing Biofouling Resistance of Marine Coatings Partially Immersed |
| ASTM D 5531-2005 | 娑傚眰鐨勯鑹插拰鍑犱綍澶栬鐨勫疄鐗╀骇鍝佹爣鍑嗙殑鍒跺畾銆佺淮鎶ゅ拰鍙戝竷鐨勬爣鍑嗘寚鍗桙/td> | Standard Guide for Preparation, Maintenance, and Distribution of Physical Product Standards for Color and Geometric Appearance of Coatings |
| ASTM D 5589-1997 | 娴嬪畾婕嗚啘鍙婃湁鍏虫秱灞傝€愭捣钘绘崯鍧忕殑鏍囧噯璇曢獙鏂规硶 | Standard Test Method for Determining the Resistance of Paint Films and Related Coatings to Algal Defacement |
| ASTM D 5590-2000 | 鐢ㄥ姞閫熺殑鍥涘懆鐞艰剛骞抽潰鍩瑰吇鍒嗘瀽娴嬪畾婕嗚啘鍙婃湁鍏虫秱灞傝€愰湁鑿屾崯鍧忕殑鏍囧噯璇曢獙鏂规硶 | Standard Test Method for Determining the Resistance of Paint Films and Related Coatings to Fungal Defacement by Accelerated Four-Week Agar Plate Assay |
| ASTM D 5711-2003 | 绮楅泦鏂欎笂绮橀檮娑傚眰娴嬪畾鐨勬爣鍑嗚瘯楠屾柟娉旤/td> | Standard Test Method for Determining the Adherent Coating on Coarse Aggregates |
| ASTM D 5767-1995 | 娑傚眰琛ㄩ潰鎴愬儚娓呮櫚搴﹀厜娉戒华鍣ㄦ祴閲忕殑鏍囧噯璇曢獙鏂规硶 | Standard Test Methods for Instrumental Measurement of Distinctness-of-Image Gloss of Coating Surfaces |
| ASTM D 5895-2003 | 鐢ㄦ満姊板紡璁板綍鍣ㄨ瘎瀹氭湁鏈烘秱灞傚湪钖勮啘鎴愬舰鏈熼棿骞茬嚗鎴栧浐鍖栫殑鏍囧噯璇曢獙鏂规硶 | Standard Test Methods for Evaluating Drying or Curing During Film Formation of Organic Coatings Using Mechanical Recorders |
| ASTM D 5962-1996 | 璇勫畾鏍稿弽搴斿爢鐨 I 绾у尯鍩熷唴杩炵画涓嶅悎鏍兼秱灞?娌规紗)鏍囧噯鎸囧崡 | Standard Guide for Maintaining Unqualified Coatings (Paints) Within Level I Areas of a Nuclear Power Facility |
| ASTM D 5965-2002 | 娑傚眰绮夋湯姣旈噸鐨勬爣鍑嗘祴璇曟柟娉旤/td> | Standard Test Methods for Specific Gravity of Coating Powders |
| ASTM D 6037-1996 | 寮哄厜娉芥秱灞傝€愬共纾ㄦ崯鐨勬爣鍑嗚瘯楠屾柟娉旤/td> | Standard Test Methods for Dry Abrasion Mar Resistance of High Gloss Coatings |
| ASTM D 609-2000 | 娑傛枡銆佹竻婕嗐€佽浆鍖栨秱灞傚拰鐩稿叧瑕嗗眰浜у搧鐨勬祴璇曠敤鍐疯涧閽㈡澘鍒跺鐨勬爣鍑嗗疄鏂借鑼傸/td> | Standard Practice for Preparation of Cold-Rolled Steel Panels for Testing Paint, Varnish, Conversion Coatings, and Related Coating Products |
| ASTM D 6132-2004 | 鐢ㄨ秴澹版尝浠〃瀵瑰鏂界殑鏈夋満娑傚眰鐨勫共鑶滃帤搴﹁繘琛屾棤鎹熸祴閲忕殑鏍囧噯璇曢獙鏂规硶 | Standard Test Method for Nondestructive Measurement of Dry Film Thickness of Applied Organic Coatings Using an Ultrasonic Gage |
| ASTM D 6133-2002 | 閫氳繃鐩存帴娉ㄥ叆涓€姘斾綋鑹茶氨浠祴瀹氬惈婧跺墏鍜屽惈姘存秱鏂欍€佹秱灞傘€佹爲鑴傚拰鍘熸潗鏂欎腑涓欓叜鍙婄敳鍩哄拰涓佸熀閱嬮吀鐩愬惈閲忕殑鏍囧噯璇旤/td> | Standard Test Method for Acetone, p-Chlorobenzotrifluoride, Methyl Acetate or t-Butyl Acetate Content of Solventborne and Waterborne Paints, Coatings, Resins, and Raw Materials by Direct Injection Into a Gas Chromatograph |
| ASTM D 6189-1997 | 鏈夋満娑傚眰鐨勫寲瀛﹀幓闄ゅ墏鐨勬晥鏋滆瘎浠风殑鏍囧噯鎿嶄綔瑙勭▼ | Standard Practice for Evaluating the Efficiency of Chemical Removers for Organic Coatings |
| ASTM D 6190-1997 | 閫氳繃鍦熷￥鍩嬭懍鐨勮瘯楠屽妯′豢瀵圭閬撴秱灞傜殑闃存瀬闈炵粨鍚堢殑鏍囧噯璇曢獙鏂规硶 | Standard Test Method for Cathodic Disbonding of Pipeline Coatings by Laboratory Simulation of Soil Burial |
| ASTM D 6191-1997 | 鐢卞彲姘村噺鐨勭┖姘斿共鐕ユ秱灞傜鏋愮殑鐢查啗鐨勬祴閲忕殑鏍囧噯璇曢獙鏂规硶 | Standard Test Method for Measurement of Evolved Formaldehyde from Water Reducible Air-Dry Coatings |
| ASTM D 6266a-2000 | 鐢盫OC鎺у埗瑁呯疆鍐呴櫎鍘荤殑娑傚眰鍜屾按杞芥苯杞︽秱灞備腑閲婃斁鐨勬尌鍙戞€ф湁鏈虹墿(VOC)鐨勬€婚噺娴嬪畾鐨勮瘯楠屾柟娉旤/td> | Test Method for Determining the Amount of Volatile Organic Compound (VOC) Released From Waterborne Automotive Coatings and Available for Removal in a VOC Control Device (Abatement) |
| ASTM D 6356-1998 | 鐢ㄤ綔灞嬮《闃叉姢娑傚眰鐨勯摑涔冲寲娌ラ潚鐨勬阿姘斾綋浜х敓鐨勬爣鍑嗚瘯楠屾柟娉旤/td> | Standard Test Method for Hydrogen Gas Generation of Aluminum Emulsified Asphalt Used as a Protective Coating for Roofing |
| ASTM D 6441-2005 | 娴嬮噺绮夋湯娑傚眰閬洊鑳藉姏鐨勬爣鍑嗚瘯楠屾柟娉旤/td> | Standard Test Methods for Measuring the Hiding Power of Powder Coatings |
| ASTM D 6486-2001 | 姹借溅娑傚眰鐨勭煭鏃舵毚闇茬殑鏍囧噯瀹炴柦瑙勭▼ | Standard Practice for Short Term Vehicle Service Exposure of Automotive Coatings |
| ASTM D 6580-2000 | 閿岀矇娑傛枡涓庨攲绮夋秱鏂欑～鍖栬杽鑶滃拰瀵岄攲娑傚眰纭寲钖勮啘涓噾灞為攲鍚噺娴嬪畾鐨勬爣鍑嗚瘯楠屾柟娉旤/td> | Standard Test Method for the Determination of Metallic Zinc Content in Both Zinc Dust Pigment and in Cured Films of Zinc-Rich Coatings |
| ASTM D 6675-2001 | 鏈哄姩杞﹁杽閽㈡澘涓婃湁鏈烘秱灞傜殑鐩愬姞閫熸埛澶栬〃闈㈣厫铓€璇曢獙鐨勬爣鍑嗗疄鏂借绋婞/td> | Standard Practice for Salt-Accelerated Outdoor Cosmetic Corrosion Testing of Organic Coatings on Automotive Sheet Steel |
| ASTM D 6694-2007 | 鍠峰皠鑱氭皑閰场娌眿椤舵潗鏂欑敤娑蹭綋纭呮秱灞傜殑鏍囧噯瑙勮寖 | Standard Specification for Liquid-Applied Silicone Coating Used in Spray Polyurethane Foam Roofing |
| ASTM D 6762a-2002 | 閫氳繃鍠锋秱灞傜殑澶栬璇勪环娴嬪畾娑傛枡閬洊鑳藉姏鐨勬爣鍑嗚瘯楠屾柟娉旤/td> | Standard Test Method for Determining the Hiding Power of Paint by Visual Evaluation of Spray Applied Coatings |
| ASTM D 6902-2004 | 铚滆兒-鐢查啗鍩烘秱灞傚湪鍥哄寲杩囩▼涓疄楠屽娴嬮噺鐢查啗鍚噺鐨勬爣鍑嗚瘯楠屾柟娉旤/td> | Standard Test Method for Laboratory Measurement of Formaldehyde Evolved During the Curing of Melamine-Formaldehyde-Based Coatings |
| ASTM D 6903-2007 | 浠庨槻姹℃秱灞傛祴瀹氭浛浠ｆ捣娲嬫按涓湁鏈虹敓鐗╂潃鑿屽墏鎶曟斁鐜囩殑鏍囧噯璇曢獙鏂规硶 | Standard Test Method for Determination of Organic Biocide Release Rate From Antifouling Coatings in Substitute Ocean Water |
| ASTM D 6904-2003 | 鐮岀瓚浣撳娑傚眰鑰愰闆ㄧ殑鏍囧噯瀹炵敤瑙勭▼ | Standard Practice for Resistance to Wind-Driven Rain for Exterior Coatings Applied on Masonry |
| ASTM D 6905-2003 | 鏈夋満娑傚眰鍐插嚮寮洸鎬х殑鏍囧噯璇曢獙鏂规硶 | Standard Test Method for Impact Flexibility of Organic Coatings |
| ASTM D 6943-2003 | 宸ヤ笟闃叉姢娑傚眰鐨勬蹈娌¤瘯楠屾爣鍑嗚绋婞/td> | Standard Practice for Immersion Testing of Industrial Protective Coatings |
| ASTM D 6944-2003 | 纭寲娑傚眰鑰愮儹寰幆鐨勬爣鍑嗚瘯楠屾柟娉旤/td> | Standard Test Method for Resistance of Cured Coatings to Thermal Cycling |
| ASTM D 6947-2007 | 鍠锋秱鑱氭皑閰场娌眿椤剁郴缁熺敤娑蹭綋姘村垎鍥哄寲鑱氭皑閰秱灞傜殑鏍囧噯瑙勮寖 | Standard Specification for Liquid Applied Moisture Cured Polyurethane Coating Used in Spray Polyurethane Foam Roofing System |
| ASTM D 6958-2003 | 鏈ㄦ潗娑傚眰渚х矘缁撴綔鍔涜瘎浠风殑鏍囧噯璇曢獙鏂规硶 | Standard Test Methods for Evaluating Side-Bonding Potential of Wood Coatings |
| ASTM D 6991-2005 | 鐢ㄦ偓鑷傛娉曟祴閲忔湁鏈烘秱灞傚唴閮ㄥ簲鍔涚殑鏍囧噯璇曢獙鏂规硶 | Standard Test Method for Measurements of Internal Stresses in Organic Coatings by Cantilever (Beam) Method |
| ASTM D 6998-2004 | 璇勪环涔冲寲娌ラ潚闆嗘枡娑傚眰鐨勬爣鍑嗗疄鏂借绋婞/td> | Standard Practice for Evaluating Aggregate Coating using Emulsified Asphalts |
| ASTM D 7055-2004 | 娑傚眰璇曢獙鐢ㄧ儹杞х⒊閽㈣杽鏉垮噯澶?鍠风爞娓呯悊)鐨勬爣鍑嗚绋婞/td> | Standard Practice for Preparation (by Abrasive Blast Cleaning) of Hot-Rolled Carbon Steel Panels for Testing of Coatings |
| ASTM D 7072-2004 | 璇勪环鑳朵钩娑傚眰鍔犻€熼鍖栫殑鏍囧噯瀹炴柦瑙勭▼ | Standard Practice for Evaluating Accelerated Efflorescence of Latex Coatings |
| ASTM D 7088-2004 | 鐮栫煶宸ョ▼鐢ㄥ湴涓嬭鏂芥秱灞傜殑鎶楁祦浣撻潤鍘嬪姏鐨勬爣鍑嗚绋婞/td> | Standard Practice for Resistance to Hydrostatic Pressure for Coatings Used in Below Grade Applications Applied to Masonry |
| ASTM D 7091-2005 | 搴旂敤浜庨粦鑹查噾灞炵殑鏃犵娑傚眰鍜屽簲鐢ㄤ簬鏈夎壊閲戝睘鐨勬棤纾佸拰涓嶅鐢垫秱灞傜殑骞茶啘鍘氬害鐨勬棤鎹熸祴閲忕殑鏍囧噯瀹炴柦瑙勭▼ | Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals |
| ASTM D 7093-2004 | 鍙岃酱鎷変几绌归潰涓婇挗鐨勬湁鏈烘秱灞傝杽鑶滅殑鍙垚褰㈡€х殑鏍囧噯璇曢獙鏂规硶 | Standard Test Method for Formability of Thin Film Organic Coatings on Steel Over a Biaxially Stretched Dome |
| ASTM D 7108-2005 | 纭珛鏍告秱灞備笓瀹惰祫鏍肩殑鏍囧噯鎸囧崡 | Standard Guide for Establishing Qualifications for a Nuclear Coatings Specialist |
| ASTM D 7207-2005 | 鍒╃敤鍙板紡鏍囩О娑插姏鎰熷簲鍓簲鍔涙祴瀹氭棤娑傚眰杞у埗闃插啿鍒峰埗鍝?RECP)瀵规矙淇濇姢鑳藉姏鐨勬爣鍑嗚瘯楠屾柟娉旤/td> | Standard Test Method for Determination of Unvegetated Rolled Erosion Control Product (RECP) Ability to Protect Sand from Hydraulically-Induced Shear Stresses under Bench-Scale Conditions |
| ASTM D 7230-2006 | 璇勪及娑傚眰璁炬柦瀹夊叏绛夌骇III鐨勬按娴告笉鐨勮仛鍚堜綋鍐呯鐨勬爣鍑嗚瘯楠屾柟娉? 閲戝睘琛簳涓婄浉鍏宠澶嘃/td> | Standard Guide for Evaluating Polymeric Lining Systems for Water Immersion in Coating Service Level III Safety-Related Applications on Metal Substrates |
| ASTM D 7245-2007 | 娴嬪畾鍚按鎬婚噺鍜屽姞鐑骇鐢熷浐鍖栨按鐨勬恫浣撴秱灞備腑鎸ュ彂鐗╁惈閲忕殑鏍囧噯璇曢獙鏂规硶 | Standard Test Method for Measuring Total Water and Volatiles in Liquid Coatings Which Produce Cure Water Upon Heating |
| ASTM D 7356-2007 | 鐢ㄦ皺寮у厜鏇濆厜瑁呯疆鍔犻€熸苯杞﹂€忔槑娑傚眰閰镐镜铓€鐨勬爣鍑嗚瘯楠屾柟娉旤/td> | Standard Test Method for Accelerated Acid Etch Weathering of Automotive Clearcoats Using a Xenon-Arc Exposure Device |
| ASTM D 7376-2007 | 鍗风姸娑傚眰閲戝睘婀跨珫绠″瓨鍌ㄦ潯浠舵埛澶栬瘎瀹氱殑鏍囧噯瀹炴柦瑙勭▼ | Standard Practice for Outdoor Evaluation of Wet Stack Storage Conditions on Coil-Coated Metals |
| ASTM D 7378-2007 | 娴嬮噺瀹炵敤娑傚眰绮夋湯棰勫浐鍖栧帤搴︾殑鏍囧噯瀹炴柦瑙勭▼ | Standard Practice for Measurement of Thickness of Applied Coating Powders to Predict Cured Thickness |
| ASTM D 751-2006 | 娑傚眰缁囩墿鐨勬爣鍑嗚瘯楠屾柟娉旤/td> | Standard Test Methods for Coated Fabrics |
| ASTM D 822-2001 | 鐢ㄧ粡杩囪繃婊ょ殑鏄庡厜纰冲姬鏇濆厜瑁呯疆娴嬪畾娑傛枡鍙婄浉鍏虫秱灞傜殑鏍囧噯瀹炴柦瑙勭▼ | Standard Practice for Filtered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings |
| ASTM D 870-2002 | 姘存蹈娓嶆硶娴嬭瘯娑傚眰鐨勮€愭按鎬ц兘鐨勬爣鍑嗗疄鏂借绋婞/td> | Standard Practice for Testing Water Resistance of Coatings Using Water Immersion |
| ASTM E 1317a-1997 | 鑸硅埗琛ㄩ潰娑傚眰鏄撶噧鎬х殑鏍囧噯璇曢獙鏂规硶 | Standard Test Method for Flammability of Marine Surface Finishes |
| ASTM E 1522-1993 | 瀹為獙瀹ょ幓鐠冨櫒鐨胯€愰珮鍘嬪姞鐑繚鎶ゆ秱灞侟/td> | Autoclavable Protective Coatings on Laboratory Glassware |
| ASTM E 1659-2005 | 鐢甸晙闀嶉攲鍚堥噾钖勯挗鏉跨殑娑傚眰閲嶉噺鍜屽寲瀛﹀垎鏋愮殑鏍囧噯璇曢獙鏂规硶 | Standard Test Methods Coating Weight and Chemical Analysis of Zinc-Nickel Alloy Electrolytically Coated on Steel Sheet |
| ASTM E 1795-2004 | 寤虹瓚鐗╁惈閾呮紗鐢ㄩ潪澧炲己娑蹭綋娑傚眰灏佽浜у搧鏍囧噯瑙勮寖 | Standard Specification for Non-Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings |
| ASTM E 1796-2003 | 寤虹瓚鐗╀腑鍚搮婕嗙殑娑蹭綋娑傚眰灏佽浜у搧鐨勯€夋嫨鍜屼娇鐢ㄧ殑鏍囧噯鎸囧崡 | Standard Guide for Selection and Use of Liquid Coating Encapsulation Products for Leaded Paint in Buildings |
| ASTM E 1797-2004 | 寤虹瓚鐗╀腑鍚搮婕嗙敤澧炲己鐨勬恫浣撴秱灞傚皝瑁呬骇鍝佺敤鏍囧噯瑙勮寖 | Standard Specification for Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings |
| ASTM E 1814-1996 | 娑傚眰鐨勮绠楁満灞傛瀽鎽勫奖(CT)妫€鏌ョ殑鏍囧噯瀹炴柦瑙勮寖 | Standard Practice for Computed Tomographic (CT) Examination of Castings |
| ASTM E 1920-2003 | 鐑柗娑傚眰鐨勯噾鐩稿埗澶囩敤鏍囧噯鎸囧崡 | Standard Guide for Metallographic Preparation of Thermal Sprayed Coatings |
| ASTM E 2098-2000 | PB绾у缁濈紭鍜屾秱灞傜郴缁?EIFS)涓娇鐢ㄧ殑鐜荤拑绾ょ淮澧炲己缃戞毚闇蹭簬姘㈡哀鍖栭挔婧舵恫鍚庢媺浼告柇瑁傚己搴︽祴瀹氱殑鏍囧噯璇曢獙鏂规硶 | Standard Test Method for Determining Tensile Breaking Strength of Glass Fiber Reinforcing Mesh for Use in Class PB Exterior Insulation and Finish Systems (EIFS), after Exposure to a Sodium Hydroxide Solution |
| ASTM E 2109-2000 | 娴嬪畾鐑柗闀€娑傚眰瀛旈殭鐜囬潰绉櫨鍒嗘瘮鐨勮瘯楠屾柟娉旤/td> | Test Methods for Determining Area Percentage Porosity in Thermal Sprayed Coatings |
| ASTM E 2134-2001 | 璇勫畾澶栭儴缁濈紭鍜屾秱灞傜郴缁熸媺浼?绮樼潃鐗规€х殑鏍囧噯璇曢獙鏂规硶 | Standard Test Method for Evaluating the Tensile-Adhesion Performance of an Exterior Insulation and Finish System (EIFS) |
| ASTM E 2141-2006 | 瀵嗗皝闅旂儹鐜荤拑鍏冧欢涓婂惛鏀剁殑鐢甸晙閾秱灞傜ǔ瀹氭€ц瘎浠风殑鏍囧噯璇曢獙鏂规硶 | Standard Test Methods for Assessing the Durability of Absorptive Electrochromic Coatings on Sealed Insulating Glass Units |
| ASTM E 2338-2006 | ASTM E 2338-2006Standard Practice for Characterization of Coatings Using Conformable Eddy-Current Se | Standard Practice for Characterization of Coatings Using Conformable Eddy-Current Sensors without Coating Reference Standards |
| ASTM E 2354-2004 | 瀵嗗皝缁濈紭鐜荤拑璁惧鍐呭惛鏀舵€х數鑷村彉鑹叉秱灞傜殑鑰愮敤鎬ц瘎浼扮敤鏍囧噯鎸囧崡 | Standard Guide for Assessing the Durability of Absorptive Electrochromic Coatings within Sealed Insulating Glass Units |
| ASTM E 2355-2004 | 鎶涘厜琛ㄩ潰涓婂惛鏀舵€х數鑷村彉鑹叉秱灞傚潎鍖€鎬ф祴閲忕殑鏍囧噯璇曢獙鏂规硶 | Standard Test Method for Measuring the Uniformity of an Absorptive Electrochromic Coating on a Glazing Surface |
| ASTM E 2485-2006 | 鑰愬喎鍐?瑙ｅ喕铻嶅寲鐨勫閮ㄧ粷缂樺拰瑁呴グ绯荤粺(EIFS)鍜岄槻姘存秱灞傜殑鏍囧噯鏈 | Standard Test Method for Freeze/Thaw Resistance of Exterior Insulation and Finish Systems (EIFS) and Water Resistive Barrier Coatings |
| ASTM E 2501-2007 | 鑽у厜绮夋秱灞傛楠岀敤鍏夋簮浜у搧鐨勬爣鍑嗚鑼傸/td> | Standard Specification for Light Source Products for Inspection of Fluorescent Coatings |
| ASTM E 2570-2007 | 澶栭儴缁濈紭鍜岀簿鏁寸郴缁熸垨鎺掓按绠′腑鐢ㄩ槻姘寸墿闅滄秱灞傝瘎瀹氱殑鏍囧噯璇曢獙鏂规硶 | Standard Test Methods for Evaluating Water-Resistive Barrier (WRB) Coatings Used under Exterior Insulation and Finish Systems (EIFS) or EIFS with Drainage |
| ASTM F 1043-2006 | 閲戝睘宸ヤ笟閾炬姢鏍忔鏋跺己搴﹀拰淇濇姢鎬ф秱灞傜殑鏍囧噯瑙勮寖 | Standard Specification for Strength and Protective Coatings on Steel Industrial Chain Link Fence Framework |
| ASTM F 1136M-2004 | 绱у浐浠剁殑鎶楅攲/閾濊厫铓€娑傚眰鐨勬爣鍑嗚鑼?绫冲埗) | Standard Specification for Zinc/Aluminum Corrosion Protective Coatings for Fasteners [Metric] |
| ASTM F 1428-1992 | 绱у浐浠剁敤闈炴湁鏈洪《娑傚眰,闃茶厫铓€娑傚眰鐨勯摑棰楃矑濉厖搴曟秱灞?鏈夋満鐗?/td> | Aluminum Particle-Filled Basecoat/Organic of Inorganic Topcoat, Corrosion Protective Coatings for Fasteners |
| ASTM F 1609-2003 | 鍙鍏ユ潗鏂欑敤纾烽吀閽欐秱灞傛爣鍑嗚鑼傸/td> | Standard Specification for Calcium Phosphate Coatings for Implantable Materials |
| ASTM F 1664-2001 | 涓庨摼鎺ユ爡鏍忎竴璧蜂娇鐢ㄧ殑鑱氭隘涔欑儻娑傚眰鎷変几閽笣鐨勬爣鍑嗚鑼傸/td> | Standard Specification for Poly(Vinyl Chloride) (PVC)-Coated Steel Tension Wire Used with Chain-Link Fence |
| ASTM F 1665-2001 | 涓庨摼鎺ユ爡鏍忎竴璧蜂娇鐢ㄧ殑鑱氭隘涔欑儻娑傚眰鍒洪挗涓濈殑鏍囧噯瑙勮寖 | Standard Specification for Poly(Vinyl Chloride) (PVC)and Other Conforming Organic Polymer-Coated Steel Barbed Wire Used With Chain-Link Fence |
| ASTM F 1842-2002 | 娴嬪畾钖勮啘寮€鍏崇殑濉戞枡鍩鸿川涓婃补澧ㄦ垨娑傚眰绮橀檮鐨勬爣鍑嗚瘯楠屾柟娉旤/td> | Standard Test Method for Determining Ink or Coating Adhesion on Plastic Substrates for Membrane Switch Applications |
| ASTM F 1916-1998 | 閫夋嫨鎷樺焦鐢ㄥ甫娑傚眰閾捐妭鏍呮爮缁撴瀯鍜屽渾鏌辩殑閾捐妭鏍呮爮绯荤粺鐨勬爣鍑嗚鑼傸/td> | Standard Specifications for Selecting Chain Link Barrier Systems With Coated Chain Link Fence Fabric and Round Posts for Detention Applications |
| ASTM F 1978-2000 | 鐢ㄦ嘲浼（鑰楄瘯楠屾満娴嬪畾閲戝睘鍖栫儹鍠峰皠娑傚眰鎶楃（鎹熸€х殑鏍囧噯璇曢獙鏂规硶 | Standard Test Method for Measuring Abrasion Resistance of Metallic Thermal Spray Coatings by Using the Taber Abraser |
| ASTM F 2016-2000 | 纭畾閫犺埞鑸逛綋鏋勯€犮€佽閰嶅拰娑傚眰璐ㄩ噺瑕佹眰鐨勬爣鍑嗗疄鏂借鑼傸/td> | Standard Practice for Establishing Shipbuilding Quality Requirements for Hull Structure, Outfitting, and Coatings |
| ASTM F 2217-2002 | 娑傚眰/绮樺悎鍓傞噸閲忔祴瀹氭爣鍑嗗疄鏂借鑼傸/td> | Standard Practice for Coating/Adhesive Weight Determination |
| ASTM F 2250-2003 | 鏌旀€у寘瑁呮潗鏂欎笂鎵撳嵃澧ㄦ按鍜屾秱灞傛姉鍖栧鑵愯殌鎬ц瘎浠风殑鏍囧噯瑙勭▼ | Standard Practice for Evaluation of Chemical Resistance of Printed Inks and Coatings on Flexible Packaging Materials |
| ASTM F 2252-2003 | 浣跨敤鑳跺甫璇勪环鏌旀€у寘瑁呮潗鏂欎笌澧ㄦ按鍜屾秱灞傞棿绮樻€х殑鏍囧噯瑙勭▼ | Standard Practice for Evaluating Ink or Coating Adhesion to Flexible Packaging Materials Using Tape |
| ASTM F 2357-2004 | 浣跨敤NORMAN宸ュ叿"RCA"纾ㄦ摝鍣ㄦ祴瀹氳杽鑶滃紑鍏充笂澧ㄦ按鍜屾秱灞傛姉纾ㄦ€х殑鏍囧噯璇曢獙鏂规硶 | Standard Test Method for Determining the Abrasion Resistance of Inks and Coatings on Membrane Switches Using the Norman Tool "RCA" Abrader |
| ASTM F 479-2006 | 缁濈紭娑傚眰鍦ㄤ娇鐢ㄤ腑缁存姢鐨勬爣鍑嗕娇鐢ㄨ鑼傸/td> | Standard Specification for In-Service Care of Insulating Blankets |
| ASTM F 519-2006 | 鐢甸晙/娑傚眰澶勭悊鍜岃澶囩幆澧冪殑鏈烘姘㈣剢鍖栬瘎浠风殑鏍囧噯璇曢獙鏂规硶 | Standard Test Method for Mechanical Hydrogen Embrittlement Evaluation of Plating/Coating Processes and Service Environments |
| ASTM F 715-2007 | 婧㈡补鎺у埗鍜屽偍瀛樼敤娑傚眰缁囩墿鐨勬爣鍑嗚瘯楠屾柟娉旤/td> | Standard Test Methods for Coated Fabrics Used for Oil Spill Control and Storage |
| ASTM F 718-2007 | 閫犺埞鍘傚拰鑸硅埗婕嗗強娑傚眰鍒跺搧/绋嬪簭鏁版嵁鍗曠殑鏍囧噯 | Standard for Shipbuilders and Marine Paints and Coatings Product/Procedure Data Sheet |
| ASTM F 735-2006 | 鐢ㄦ憜鍔ㄦ矙琚嬫硶娴嬪畾閫忔槑濉戞枡鍙婃秱灞傛姉纾ㄦ崯鎬х殑鏍囧噯璇曢獙鏂规硶 | Standard Test Method for Abrasion Resistance of Transparent Plastics and Coatings Using the Oscillating Sand Method |
| ASTM G 10-1983 | 绠￠亾娑傚眰姣斿彲寮€х殑璇曢獙鏂规硶 | Standard Test Method for Specific Bendability of Pipeline Coatings |
| ASTM G 11-2004 | 瀹ゅ姘斿€欒€佸寲瀵圭閬撴秱灞傜殑褰卞搷鐨勬爣鍑嗚瘯楠屾柟娉旤/td> | Standard Test Method for Effects of Outdoor Weathering on Pipeline Coatings |
| ASTM G 12-2007 | 閽㈠埗绠￠亾娑傚眰鑶滃帤搴︾殑鏃犳崯娴嬮噺鐢ㄦ爣鍑嗚瘯楠屾柟娉旤/td> | Standard Test Method for Nondestructive Measurement of Film Thickness of Pipeline Coatings on Steel |
| ASTM G 14-2004 | 绠￠亾娑傚眰鎶楀啿鍑绘€х殑鏍囧噯璇曢獙鏂规硶(钀介敜璇曢獙) | Standard Test Method for Impact Resistance of Pipeline Coatings (Falling Weight Test) |
| ASTM G 17-2007 | 绠￠亾娑傚眰鑰愭笚閫忔€х敤鏍囧噯璇曢獙鏂规硶(閽濆ご妫? | Standard Test Method for Penetration Resistance of Pipeline Coatings (Blunt Rod) |
| ASTM G 19-2004 | 鐩存帴鍦熷煁娉曟祴瀹氱閬撴秱灞傛姉鍓ヨ惤鐗规€х殑鏍囧噯璇曢獙鏂规硶 | Standard Test Method for Disbonding Characteristics of Pipeline Coatings by Direct Soil Burial |
| ASTM G 20-1988 | 绠￠亾娑傚眰鎶楀寲瀛﹁嵂鐗╄厫铓€鎬х殑璇曢獙鏂规硶 | Test Method for Chemical Resistance of Pipeline Coatings |
| ASTM G 55-2007 | 绠￠亾娑傚眰淇ˉ鏉愭枡鐨勮瘎浼扮敤鏍囧噯璇曢獙鏂规硶 | Standard Test Method for Evaluating Pipeline Coating Patch Materials |
| ASTM G 6-2007 | 绠￠亾娑傚眰鎶楃（鎬ф爣鍑嗚瘯楠屾柟娉旤/td> | Standard Test Method for Abrasion Resistance of Pipeline Coatings |
| ASTM G 62-2007 | 绠￠亾娑傚眰鍋囨湡妫€娴嬬敤鏍囧噯璇曢獙鏂规硶 | Standard Test Methods for Holiday Detection in Pipeline Coatings |
| ASTM G 70-2007 | 绠￠亾娑傚眰鐜舰鍙集鏇叉€ф爣鍑嗚瘯楠屾柟娉?鍘嬪疄璇曢獙) | Standard Test Method for Ring Bendability of Pipeline Coatings (Squeeze Test) |
| ASTM G 8-1996 | 绠￠亾娑傚眰闃存瀬鍓ョ鐨勬爣鍑嗚瘯楠屾柟娉旤/td> | Standard Test Methods for Cathodic Disbonding of Pipeline Coatings |
| ASTM G 80-2007 | 绠￠亾娑傚眰鐗规晥闃存瀬鍓ヨ惤鐨勬爣鍑嗚瘯楠屾柟娉旤/td> | Standard Test Method for Specific Cathodic Disbonding of Pipeline Coatings |
| ASTM G 9-2007 | 绠￠亾娑傚眰娓楁按鎬х殑鏍囧噯璇曢獙鏂规硶 | Standard Test Method for Water Penetration into Pipeline Coatings |
| ASTM G 95-2007 | 绠￠亾娑傚眰鐨勯槾鏋佸墺绂昏瘯楠岀敤鏍囧噯璇曢獙鏂规硶(闄勭潃鐢垫睜娉? | Standard Test Method for Cathodic Disbondment Test of Pipeline Coatings (Attached Cell Method) |
| IEEE 1523-2002 | 瀹ゅ闄剁摲缁濈紭瀛愮敤瀹ゆ俯纭寲纭呴叜姗¤兌娑傚眰鐨勫簲鐢ㄣ€佺淮鎶ゅ拰璇勪环 | (Application, maintenance, and evaluation of room temperature vulcanizing (RTV) silicone rubber coatings for outdoor ceramic insulators) |
m.cnreagent.com
