| 缂栧彿 | 涓枃鍚嶇О | 鑻辨枃鍚嶇О |
| BS 1344-16-1998 | 閲夊眰绮炬暣璇曢獙鏂规硶.绗?6閮ㄥ垎.鐑归オ鍣ㄥ叿娑傚眰鑰愮儹鍐插嚮鎬?/td> | Methods of testing vitreous enamel finishes - Resistance to thermal shock of coatings on cooking utensils |
| BS 1494-1-1964 | 寤虹瓚鐢ㄥ浐瀹氶檮浠惰鑼?绗?閮ㄥ垎:鏉挎潗銆佸眿闈笌澧欏娑傚眰鐢ㄥ浐瀹氫欢 | Specification for fixing accessories for building purposes - Fixings for sheet, roof and wall coverings |
| BS 2F 127-1991 | 鑸┖鑸ぉ鐢ㄥぉ鐒舵垨鍚堟垚寮规€т綋娑傚眰灏奸緳缁囩墿瑙勮寖 | Specification for nylon fabrics suitable for coating with natuRAL or synthetic elastomers for aerospace purposes |
| BS 2X 35-2003 | 鑸┖鑸ぉ鐢ㄩ€夋嫨鎬у彲闄ゅ幓鐨勪腑闂存秱灞侟/td> | Selectively removable intermediate coating for aerospace purposes |
| BS 3424-0-2000 | 娑傚眰缁囩墿鐨勮瘯楠?鍚勯儴鍒嗙殑绱㈠紩 | Testing coated fabrics - Index of parts |
| BS 3424-12-1996 | 娑傚眰缁囩墿璇曢獙.鍔犻€熻€佸寲璇曢獙 | Testing coated fabrics - Accelerated ageing tests |
| BS 3424-13-1999 | 娑傚眰缁囩墿璇曢獙.鍏夐殭璇曢獙鑹茬墷搴︽柟娉曠殑閫夋嫨鎸囧崡 | Testing coated fabrics - Guide to the selection of methods for colour fastness to light testing |
| BS 3424-1989 | 娑傚眰缁囩墿璇曢獙鏂规硶.绗?9閮ㄥ垎:鏂规硶22A銆?2B 鍙?2C.纭攬铓€鎬х殑娴嬪畾 | Testing coated fabrics. Methods 22A, 22B and 22C. Determination of sulphur staining |
| BS 3424-22-1983 | 娑傝缁囩墿璇曢獙.鏂规硶22.鑱氭隘涔欑儻娑傚眰鐨勭啍鍖栧害鍜岀～鍖栨鑳舵秱灞傜殑纭寲搴︽祴瀹氭柟娉旤/td> | Testing coated fabrics - Method 25 - Methods for determination of fusion of PVC coatings and the state of cure of vulcanized rubber coatings |
| BS 3424-25-1993 | 娑傝缁囩墿璇曢獙鏂规硶.鏂规硶25:娑傚眰鍘氬害鍜屼换涓€鎵╁睍灞傚帤搴︽祴閲忔柟娉旤/td> | Testing coated fabrics - Method 28 - Method for determination of the coating thickness and thickness of any expanded layer |
| BS 3424-8-1983 | 娑傚眰缁囩墿璇曢獙.鏂规硶10A銆?0B鍙?0C.浣庢俯鎬ц兘鐨勬祴瀹氭柟娉旤/td> | Testing coated fabrics - Methods 10A, 10B and 10C - Methods for determination of low temperature performance |
| BS 3546-2001 | 鐢熶骇闃叉按娓楅€忓竷鏂欑敤鐨勬秱灞傜粐鐗?/td> | Coated fabrics for use in the manufacture of water penetration resistant clothing |
| BS 3900-A10-1998 | 娑傛枡璇曢獙鏂规硶.娑蹭綋娑傛枡璇曢獙(涓嶅寘鎷寲瀛﹁瘯楠?.绗珹10閮ㄥ垎:閫氳繃骞茬嚗娑傚眰鐨勫瘑搴︽祴閲忔祴瀹氶潪鎸ュ彂鐗╄川鐨勫绉櫨鍒嗘瘮 | Methods of test for paints - Tests on liquid paints (excluding chemical tests) - Determination of percentage volume of non-volatile matter by measurement of the density of a dried coating |
| BS 3900-F10-1985 | 娑傛枡璇曢獙鏂规硶.绗現闆咜娑傛枡鑶滆€愪箙鎬ц瘯楠?绗?0閮ㄥ垎:娴锋磱鐜涓秱灞傝€愰槾鏋佽В绮樺悎鎬ф祴瀹欬/td> | Methods of test for paints - Determination of resistance to cathodic disbonding of coatings for use in marine environments |
| BS 3900-F11-1985 | 娑傛枡璇曢獙鏂规硶.绗現闆咜娑傛枡鑶滅殑鑰愪箙鎬ц瘯楠?绗?1閮ㄥ垎:闄嗗熀鍦颁笅缁撴瀯鐢ㄦ秱灞傝€愰槾鏋佽В绮樺悎鎬ф祴瀹欬/td> | Methods of test for paint - Durability tests on paint films - Determination of resistance to cathodic disbonding of coatings for use on land-based buried structures |
| BS 3900-F17-1998 | 娑傛枡璇曢獙鏂规硶.绗現鑺傦細娑傛枡鑶滅殑鑰愪箙鎬ц瘯楠?绗?7閮ㄥ垎锛氭秱灞傝€愭箍鍒拰娓呮磥搴︾殑娴嬪畾 | Methods of test for paint. Durability tests on paint films. Determination of wet-scrub resistance and cleanability of coatings |
| BS 3900-J1-1993 | 娑傛枡鐨勮瘯楠屾柟娉?绗琂1閮ㄥ垎锛氭秱灞傜矇鏈瘯楠?娑傚眰绮夋湯鍙栨牱 | Methods of test for paints. Testing of coating powders. Sampling of coating powders |
| BS 3900-J11-1997 | 娑傛枡璇曢獙鏂规硶.绮夋湯娑傚眰鐨勮瘯楠?绗琂11閮ㄥ垎:娑傝绮夋湯娴佹祴瀹?鏂滈潰鍙樺瀷娉? | Methods of test for paints - Testing of coating powders - Determination of flow of coating powders (inclined-plane method) |
| BS 3900-J2-1993 | 娑傛枡璇曢獙鏂规硶.绗琂2閮ㄥ垎:绮夋湯娑傚眰绮掑緞鍒嗗竷绛涘垎娴嬪畾 | Methods of test for paints - Testing of coating powders - Determination of particle size distribution of coating powders by sieving |
| BS 3900-J3-1998 | 娑傛枡璇曢獙鏂规硶.娑傜矇璇曢獙.绗琂3閮ㄥ垎:娑傚眰绮夋湯鍑濊兌鏃堕棿娴嬪畾 | Methods of test for paints - Testing of coating powders - Determination of gel time of coating powders |
| BS 3900-J5-1993 | 娑傛枡璇曢獙鏂规硶.绗琂5閮ㄥ垎:绮夋湯娑傚眰鍔犵儹璐ㄩ噺鎹熷け娴嬪畾 | Methods of test for paints - Testing of coating powders - Determination of loss of mass of coating powders on heating |
| BS 3900-J6-1993 | 娑傛枡璇曢獙鏂规硶.绗琂6閮ㄥ垎:绮夋湯娑傚眰璇曢獙.鐢ㄦ皵浣撴瘮瀵规祴閲嶈娴嬪畾绮夋湯娑傚眰瀵嗗害(鍙傜収娉? | Methods of test for paints - Testing of coating powders - Determination of density of coating powders by gas comparison pyknometer (referee method) |
| BS 3900-J7-1993 | 娑傛枡璇曢獙鏂规硶.绗琂7閮ㄥ垎:绮夋湯娑傚眰璇曢獙.鐢ㄦ恫浣撲綅绉绘瘮閲嶈娴嬪畾绮夋湯娑傚眰瀵嗗害 | Methods of test for paints - Testing of coating powders - Determination of density of coating powders by liquid displacement pyknometer |
| BS 3900-J8-1993 | 娑傛枡鐨勮瘯楠屾柟娉?绗琂8閮ㄥ垎:绮夋湯娑傚眰闃茬垎涓嬮檺鐨勮绠桙/td> | Methods of test for paints - Testing of coating powders - Calculation of lower explosion limit of coating powders |
| BS 3900-J9-1993 | 娑傛枡璇曢獙鏂规硶.绗琂9閮ㄥ垎:绮夋湯娑傚眰/姘斾綋娣峰悎鐗╂祦鍔ㄧ壒鎬ф祴瀹欬/td> | Methods of test for paints - Testing of coating powders - Determination of flow properties of a coating powder/air mixture |
| BS 4393-1991 | 缁勪欢缁堢鐢ㄥ彲鐒婇敗鎴栭敗-閾呮秱灞傚绾胯鑼傸/td> | Specification for solderable tin or tin-lead coated wires for component terminations |
| BS 4842-1984 | 鍑冪敤浜庡閮ㄥ缓绛戠殑閾濆悎閲戞尋鍘嬩欢銆佽杽鏉挎潗鍜岄鎴愬瀷浠朵笂鐨勬恫鎬佹湁鏈烘秱灞傚拰娑叉€佹湁鏈烘秱灞傜殑瑙勮寖 | Specification for liquid organic coatings for application to aluminium alloy extrusions, sheet and preformed sections for external architectural purposes, and for the finish on aluminium alloy extrusions, sheet and preformed sections coated with liquid organic coatings |
| BS 5367-1976 | 娑傚眰纾ㄦ枡鐨勫昂瀵伏/td> | Dimensions of coated abrasives |
| BS 5599-1993 | 宸ョ▼鐢ㄩ摑鍙婂叾鍚堥噾寮洪槼鏋佹哀鍖栨秱灞傝鑼傸/td> | Specification for hard anodic oxidation coatings on aluminium and its alloys for engineering purposes |
| BS 5664-3.11-1995 | 鐢电粷缂樹笉婧跺彲鑱氬悎鏍戣剛鍖栧悎鐗?绗?閮ㄥ垎:鍚勫瀷鏉愭枡瑙勮寖.绗?1鑺侜鐜哀鏍戣剛鍩烘秱灞傜矇鏈?/td> | Solventless polymerisable resinous compounds used for electrical insulation - Specification for individual materials - Epoxy resin-based coating powders |
| BS 5790-2-1995 | 瀹ゅ唴瑁呴グ鐢ㄦ秱瑕嗙粐鐗?绗?閮ㄥ垎:鑱氭隘涔欑儻娑傚眰鏈虹粐鐗╄鑼傸/td> | Coated fabrics for upholstery - Specification for PVC coated woven fabrics |
| BS 6359-1983 | 缂╁井骞崇墖鏍囬娑傚眰(褰╄壊鏉?灏哄鍜屼綅缃鑼傸/td> | Specification for dimensions and position of microfiche heading coating (colour stripe) |
| BS 6404-12-1993 | 纾佹€ф潗鏂?绗?2閮ㄥ垎:灞傞棿闅旂儹娑傚眰淇濇俯鎬ц兘鐨勮瘎瀹氭柟娉曟寚鍗桙/td> | Magnetic materials - Guide to methods of assessment of temperature capability of interlaminar insulation coatings |
| BS 6404-20-1996 | 纾佹€ф潗鏂?绗?0閮ㄥ垎:缁濈紭娑傚眰鐨勭數闃诲拰娓╁害鍒嗙被 | Magnetic materials - Resistance and temperature classification of insulation coatings |
| BS 6408-1983 | 闃叉疆婀垮ぉ姘旂敤鐨勬秱灞傜粐鐗╅洦琛ｈ鑼傸/td> | Specification for clothing made from coated fabrics for protection against wet weather |
| BS 6496-1984 | 鏂藉姞骞剁剻鍥轰簬閾濆悎閲戠殑鎸ゅ帇鏉愩€佹澘鏉愬拰棰勬垚鍨嬫潗(澶栭儴寤虹瓚鐢?鐨勭矇鏈湁鏈烘秱灞傚拰甯︽湁绮夋湯鏈夋満娑傚眰鐨勯摑鍚堥噾鎸ゅ帇鏉忺/td> | Specification for powder organic coatings for application and stoving to aluminium alloy extrusions, sheet and preformed sections for external architectural purposes, and for the finish on aluminium alloy extrusions, sheet and preformed sections coated with powder organic coatings |
| BS 6949-1991 | 涓庨ギ鐢ㄦ按鎺ヨЕ闄ゅ鐨勫喎鐢ㄦ播闈掑熀娑傚眰瑙勮寖 | Specification for bitumen-based coatings for cold application excluding use in contact with potable water |
| BS 7079-A1 Supplement 1-1996 | 娑傛枡鍜屾湁鍏充骇鍝佹秱灞傚墠閽㈠熀鐗囩殑鍒跺.绗珹1闆咜琛ㄩ潰娓呮磥搴︾洰娴嬭瘎瀹?绗?閮ㄥ垎:閲囩敤涓嶅悓纾ㄦ枡杩涜鍠锋矙闄ら攬鏃堕挗鐗囪〃 | Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Representative photographic examples of the change of appearance imparted to steel when blast-cleaned with different abrasives |
| BS 7079-A1-1989 | 娑傛枡鍜屾湁鍏充骇鍝佸簲鐢ㄥ墠閽㈠熀鐗囩殑鍒跺.琛ㄩ潰娓呮磥搴﹁瑙夎瘎瀹?鏈秱灞傞挗鍩虹墖鍜岄挗鍩虹墖鍏ㄩ儴娓呴櫎鍘熸秱灞備互鍚庣敓閿堢▼搴﹀拰 | Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Specification for rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings |
| BS 7079-A2-1996 | 娑傛枡鍜屾湁鍏充骇鍝佹秱灞傚墠閽㈠熀鐗囩殑鍒跺.绗珹2闆咜琛ㄩ潰娓呮磥搴︾洰娴嬭瘎瀹?绗?閮ㄥ垎:灞€閮ㄦ竻闄ゅ師娑傚眰鍚庡師娑傚眰鐨勯挗鐗囧簳鍩裹/td> | Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Preparation grades of previously coated steel substrates after localized removal of previous coatings |
| BS 7079-B3-1993 | 娑傛枡鍜屾湁鍏充骇鍝佸簲鐢ㄥ墠閽㈠熀鐗囩殑鍒跺.琛ㄩ潰娓呮磥搴﹁瘎瀹氭柟娉?绗珺3閮ㄥ垎:鍑嗗娑傚眰(鍘嬫晱甯︽柟娉?鐨勯挗鍩洪潰灏樺灑璇勫畾 | Preparation of steel substrates before application of paints and related products. Methods for the assessment of surface cleanliness. Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method) |
| BS 7371-1-1991 | 閲戝睘绱у浐浠舵秱灞?涓€鑸姹傚拰閫夋嫨鎸囧崡瑙勮寖 | Coatings on metal fasteners - Specification for general requirements and selection guidelines |
| BS 7371-10-1994 | 閲戝睘绱у浐浠舵秱灞?绗?0閮ㄥ垎:鏈夋満娑傚眰瑙勮寖 | Coatings on metal fasteners - Specification for organic coatings |
| BS 7371-2-1993 | 閲戝睘绱у浐浠舵秱灞?鎵煩/澶圭揣鍔涘叧绯诲紡瑙勮寖 | Coatings on metal fasteners - Specification for torque/clamping force relationship |
| BS 7371-4-1994 | 閲戝睘绱у浐浠舵秱灞?绗?閮ㄥ垎:鐢甸晙闀嶃€侀晬/閾拰閾?闀?閾秱灞傝鑼? | Coatings on metal fasteners - Specification for electroplated nickel, nickel/chromium and copper/nickel/chromium coatings |
| BS 7371-6-1998 | 閲戝睘绱у浐浠舵秱灞?鐑蹈闀€閿屾秱灞傜殑瑙勮寖 | Coatings on metal fasteners - Specification for hot dipped galvanized coatings |
| BS 7371-7-1994 | 閲戝睘绱у浐浠舵秱灞?閲囩敤鏈烘娉曟柦鍔犻攲娑傚眰瑙勮寖 | Coatings on metal fasteners - Specification for mechanically applied zinc coatings |
| BS 7371-8-1998 | 閲戝睘绱у浐浠舵秱灞?绮夋湯闀€閿屾秱灞傝鑼傸/td> | Coatings on metal fasteners - Specification for sherardized coatings |
| BS 7371-9-1996 | 閲戝睘绱у浐浠舵秱灞?纾烽吀鐩愭秱灞傛垨娌规秱灞傝鑼傸/td> | Coatings on metal fasteners - Specification for phosphate or phosphate and oil coatings |
| BS 7442-0-1991 | 姗¤兌鎴栧鏂欐秱灞傝緤瀛?绗?閮ㄥ垎:瀵艰█ | Rubber or plastics covered rollers - Introduction |
| BS 7442-1-1991 | 鏈夋鑳舵垨濉戞枡娑傚眰鐨勮緤瀛?鏈璇嶆眹 | Rubber or plastics covered rollers - Glossary of terms |
| BS 7442-2-1991 | 鏈夋鑳舵垨濉戞枡娑傚眰鐨勮緤瀛?绗?閮ㄥ垎:鐢变拱鏂规彁渚涚殑鎶€鏈俊鎭帹鑽愭爣鍑咟/td> | Rubber or plastics covered rollers - Recommendations for technical information to be provided by the purchaser |
| BS 7442-3.1-1998 | 姗¤兌鎴栧鏂欐秱灞傜殑杈婂瓙.璇曢獙鏂规硶.琛ㄨ纭害娴嬪畾(IRHD鏂规硶) | Rubber or plastics covered rollers - Method of test - Determination of apparent hardness (IRHD method) |
| BS 7442-3.2-1991 | 鏈夋鑳舵垨濉戞枡娑傚眰杈婂瓙.绗?閮ㄥ垎:璇曢獙鏂规硶.绗?鑺侜鑲栨皬(SHORE)纭害娴嬪畾 | Rubber or plastics covered rollers - Method of test - Determination of Shore hardness |
| BS 7442-3.3-1992 | 姗¤兌鎴栧鏂欐秱灞傜殑杈婂瓙.绗?閮ㄥ垎:璇曢獙鏂规硶.绗?鑺侜閲囩敤鏅タ鍜岀惣鏂硶娴嬪畾琛ㄩ潰纭害 | Rubber or plastics covered rollers - Method of test - Determination of apparent hardness by the Pusey and Jones method |
| BS 7442-4.1-1992 | 鏈夋鑳舵垨濉戞枡娑傚眰杈婂瓙.瑕佹眰.琛ㄨ纭害瑙勮寖 | Rubber or plastics covered rollers - Requirements - Specification for apparent hardness |
| BS 7442-4.2-1994 | 鏈夋鑳舵垨濉戞枡娑傚眰鐨勮緤瀛?瑕佹眰.琛ㄩ潰绮惧害鍒嗙被 | Rubber or plastics covered rollers - Requirements - Classification by surface finish |
| BS 7442-4.3-1993 | 鏈夋鑳舵垨濉戞枡娑傚眰杈婂瓙.绗?閮ㄥ垎:瑕佹眰.绗?鑺侜灏哄鍏樊瑙勮寖 | Rubber or plastics covered rollers - Requirements - Specification for dimensional tolerances |
| BS 7664-2000 | 搴曟秱灞傚拰琛ㄩ潰绮惧埗娑傛枡瑙勮寖 | Specification for undercoat and finishing paints |
| BS 7793-1-1995 | 铻烘爴鍥哄畾閽㈡澘鐨勭摲閲夋秱灞?鍐滀笟鐢ㄦ偿娴嗙綈鐨勮灪鏍撳浐瀹氶挗鏉跨殑娑傚眰瑙勮寖 | Vitreous enamel coatings for use on bolted steel panels - Specification for coatings on bolted steel panels for use in agricultural slurry tanks |
| BS 7793-2-1996 | 鏍撴帴閽㈡澘鐢ㄧ摲閲夋秱灞?绗?閮ㄥ垎:宸ヤ笟娑蹭綋鍌ㄧ綈鐢ㄦ爴鎺ラ挗鏉跨摲閲夋秱灞傝鑼傸/td> | Vitreous enamel coatings for use on bolted steel panels - Specification for coatings on bolted steel panels for use in industrial liquid storage tanks |
| BS 7822-3-1995 | 浣庡帇绯荤粺璁惧鐨勭粷缂樿皟鏁?绗?閮ㄥ垎:鍗板埗鐢佃矾鏉跨粍浠朵负杈惧埌缁濈紭璋冩暣鐨勬秱灞備娇鐢?/td> | Insulation coordination for equipment within low-voltage systems - Use of coatings to achieve insulation coordination of printed board assemblies |
| BS 8000-12-1989 | 寤虹瓚宸ュ湴鎿嶄綔宸ヨ壓.绗?2閮ㄥ垎:瑁呴グ澧欓潰娑傚眰鍜屾秱婕嗗疄鐢ㄨ绋婞/td> | WoRKmanship on building sites - Code of practice for decorative wallcoverings and painting |
| BS 8202-1-1995 | 寤虹瓚鏋勪欢鐨勯槻鐏秱灞?鏃犳満鐗╁柗娑傜殑閫夋嫨涓庤缃疄鐢ㄨ绋婞/td> | Coatings for fire protection of building elements - Code of practice for the selection and installation of sprayed mineral coatings |
| BS 8202-2-1992 | 寤虹瓚鏋勪欢鐨勯槻鐏秱灞?闃茬伀鐢ㄩ噾灞炶‖搴曡啫鑳€娑傚眰浣跨敤瀹炵敤瑙勭▼ | Coatings for fire protection of building elements - Code of practice for the use of intumescent coating systems to metallic substrates for providing fire resistance |
| BS 8216-1991 | 寤虹瓚鐗╃敤闅旂儹鍜屽惛澹板柗娑傝交璐ㄧ熆鐗╂秱灞傚疄鐢ㄨ绋婞/td> | Code of practice for use of sprayed lightweight mineral coatings used for thermal insulation and sound absorption in buildings |
| BS A 303-1994 | 寮哄害绛夌骇灏忎簬鎴栫瓑浜?100 MPa鐨勬湁娑傚眰鎴栨棤娑傚眰鐭暱搴︽垨涓暱搴J铻虹汗鐨勭敱閲戝睘鏉愭枡鍒舵垚鐨勬爣绉?2瑙掕灪鏍撳ご鏍囩О鏉咟/td> | Bolts, normal bihexagonal head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa - Dimensions |
| BS A 304-1994 | 寮哄害绛夌骇灏忎簬鎴栫瓑浜?100 MPa鐨勬湁娑傚眰鎴栨棤娑傚眰闀块暱搴J铻虹汗鐨勭敱閲戝睘鏉愭枡鍒舵垚鐨勬爣绉?2瑙掕灪鏍撳ご鏍囩О鎴栬妭寰勬潌铻裹/td> | Bolts, normal bihexagonal head, normal or pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa - Dimensions |
| BS A 307-1994 | 寮哄害绛夌骇灏忎簬鎴栫瓑浜?100 MPa鐨勬湁娑傚眰鎴栨棤娑傚眰闀块暱搴J铻虹汗鐢遍噾灞炴潗鏂欏埗鎴愮殑鏍囩О鑺遍敭澶淬€佹爣绉版垨鑺傚緞鏉嗚灪鏍? | Bolts, normal spline head, normal or pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa - Dimensions |
| BS A 308-1994 | 寮哄害绛夌骇灏忎簬鎴栫瓑浜?100 MPa鐨勬湁娑傚眰鎴栨棤娑傚眰鐭暱搴︽垨涓暱搴J铻虹汗鐨勭敱閲戝睘鏉愭枡鍒舵垚鐨勬爣绉拌姳閿ご鏍囩О鏉嗚灪鏍掽/td> | Bolts, normal spline head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa - Dimensions |
| BS A 309-1994 | 寮哄害绛夌骇灏忎簬鎴栫瓑浜?100 MPa鐨勬湁娑傚眰鎴栨棤娑傚眰闀块暱搴J铻虹汗鐨勭敱閲戝睘鏉愭枡鍒舵垚鐨勫ぇ鍏澶存爣绉版垨鑺傚緞鏉嗚灪鏍?灏裹/td> | Bolts, large hexagonal head, normal or pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa - Dimensions |
| BS A 310-1995 | 寮哄害绛夌骇灏忎簬鎴栫瓑浜?250MPa-1800MPa鐨勬湁娑傚眰鎴栨棤娑傚眰鐭暱搴︽垨涓暱搴J铻虹汗鐨勭敱閲戝睘鏉愭枡鍒舵垚鐨勬爣绉板ぇ12瑙掕灪 | Bolts, large bihexagonal head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes 1250 MPa to 1800 MPa - Dimensions |
| BS A 311-1997 | 鑸┖鑸ぉ.寮哄害绾у皬浜庢垨绛変簬1100 MPa鐨勬秱灞傛垨鏈秱灞傞噾灞炴潗鏂欐爣绉版潌鐭暱搴︽垨涓瓑闀垮害MJ铻虹汗鐨勫唴閮ㄥ亸绉诲崄瀛楀舰 | Aerospace - Screws, 100 掳 reduced countersunk head, internal offset cruciform ribbed or unribbed drive, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa - Dimensions |
| BS A 312-1997 | 寮哄害绾у皬浜庢垨绛変簬1100MPa鐨勬秱灞傛垨鏈秱灞傞噾灞炴潗鏂欏埗闃舵褰㈡潌銆佺煭闀垮害鎴栦腑绛夐暱搴J铻虹汗鐨勫唴鍋忕Щ鍗佸瓧褰㈣倠鐘舵垨 | Screws, pan head, internal offset cruciform ribbed or unribbed drive, stepped shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa - Dimensions |
| BS A 313-1997 | 鑸┖鑸ぉ.寮哄害绾у皬浜庢垨绛変簬1100MPa鐨勬秱灞傛垨鏈秱灞傞噾灞炴潗鏂欏埗鑺傚緞鏉嗛暱闀垮害MJ铻虹汗鐨勫唴鍋忕Щ鍗佸瓧褰㈣倠鐘舵垨闈炶倠鐘迭/td> | Areospace - Screws, pan head, internal offset cruciform ribbed or unribbed drive, pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa - Dimensions |
| BS A 322-1998 | 鍐呭垎鏀嚫鍨嬫垨闈炲嚫鍨嬮┍鍔ㄧ殑閲戝睘鏉愭枡娑傚眰鎴栨湭鍦熷眰鐨勫己搴︾骇浣庝簬鎴栫瓑浜?100Mpa鐨勫钩澶村甫铻虹汗铻洪拤.灏哄 | Screws, pan head, internal offset cruciform ribbed or unribbed drive, threaded to head, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa - Dimensions |
| BS A 331-1998 | 寮哄害绾у皬浜庢垨绛変簬1275MPa鐨勬秱灞傛垨鏈秱灞傞噾灞炴潗鏂欏埗鏍囩О鎴栬妭寰勬潌闀块暱搴J铻虹汗鎵庡埗鍙屽叚瑙掑ご铻烘嫶.灏哄 | Bolts, reduced bihexagonal head, normal or pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1275 MPa - Dimensions |
| BS DD CEN/TS 1071-10-2004 | 楂樼骇宸ヤ笟闄剁摲.闄剁摲娑傚眰鐨勮瘯楠屾柟娉?妯垏娉曟祴瀹氭秱灞傚帤搴?/td> | Advanced technical ceramics - Methods of test for ceramic coatings - Determination of coating thickness by cross section |
| BS DD CEN/TS 1071-11-2007 | 楂樼骇宸ヤ笟闄剁摲.闄剁摲娑傚眰鐨勮瘯楠屾柟娉?鍒╃敤Stoney鍏紡璁＄畻鍐呭簲鍔汓/td> | Advanced technical ceramics - Methods of test for ceramic coatings - Determination of internal stress by the Stoney formula |
| BS DD CEN/TS 1071-7-2003 | 楂樼骇宸ヤ笟闄剁摲.闄剁摲娑傚眰鐨勮瘯楠屾柟娉?鐢ㄤ华鍣ㄥ寲鍒荤棔璇曢獙娴嬪畾纭害鍙婃潹寮忔ā閲廃/td> | Advanced technical ceramics - Methods of test for ceramic coatings - Determination of hardness and Young's modulus by instrumented indentation testing |
| BS DD CEN/TS 1071-8-2005 | 楂樼骇宸ヤ笟闄剁摲.闄剁摲娑傚眰鐨勮瘯楠屾柟娉?绮樼潃鎬ц瘎瀹氱敤娲涙皬閽堝叆璇曢獙 | Advanced technical ceramics - Methods of text for ceramic coatings - Rockwell indentation test for evaluation of adhesion |
| BS DD CEN/TS 14234-2003 | 涓庨鍝佹帴瑙︾殑鏉愭枡鍜岀墿鍝?绾稿拰绾告澘鐨勮仛鍚堢墿娑傚眰.鎬昏縼绉荤殑鏉′欢鍜岃瘯楠屾柟娉曠殑閫夋嫨鎸囧崡 | Materials and articles in contact with foodstuffs - Polymeric coatings on paper and board - Guide to the selection of conditions and test methods for overall migration |
| BS DD CEN/TS 14235-2003 | 涓庨鍝佹帴瑙︾殑鏉愭枡鍜岀墿鍝?閲戝睘鍩轰笂鐨勮仛鍚堢墿娑傚眰.鎬昏縼绉荤殑鏉′欢鍜岃瘯楠屾柟娉曠殑閫夋嫨鎸囧崡 | Materials and articles in contact with foodstuffs - Polymeric coatings on metal substrates - Guide to the selection of conditions and test methods for overall migration |
| BS DD ENV 1071-5-1995 | 楂樼骇宸ヤ笟闄剁摲.闄剁摲娑傚眰鐨勮瘯楠屾柟娉?瀛旈殭鐜囨祴瀹欬/td> | Advanced technical ceramics - Methods of test for ceramic coatings - Determination of porosity |
| BS DD ENV 1071-6-2002 | 楂樼骇宸ヤ笟闄剁摲.闄剁摲娑傚眰鐨勮瘯楠屾柟娉?鐢ㄥ井纾ㄦ崯鎹熻€楄瘯楠屾祴瀹氳€愮（鎬?/td> | Advanced technical ceramics - Methods of test for ceramic coatings - Determination of the abrasion resistance of coatings by a micro-abrasion wear test |
| BS EN 10169-2-2006 | 杩炵画鏈夋満娑傚眰(鐩樼粫娑傚眰)鍙樺钩閽㈣涧鏉?寤虹瓚鐗╁閮ㄧ敤鍝?/td> | Continuously organic coated (coil coated) steel flat products - Part 2: Products for building exterior applications |
| BS EN 10169-3-2003 | 杩炵画鏈夋満娑傚眰(鐩樼粫娑傚眰)鍙樺钩閽㈣涧鏉?寤虹瓚鐗╁唴閮ㄧ敤鍝?/td> | Continuously organic coated (coil coated) steel flat products - Products for building interior applications |
| BS EN 10202-2001 | 鍐风缉鐢佃В閾骇鍝?鐢佃В閿℃澘鍜岀數瑙ｉ摤姘у寲娑傚眰閽↑/td> | Cold reduced tinmill products - Electrolytic tinplate and electrolytic chromium/chromium oxide coated steel |
| BS EN 10244-1-2001 | 閽笣鍙婂叾鍒跺搧.閽笣涓婄殑闈炴湁鑹查噾灞炴秱灞?涓€鑸師鐞咟/td> | Steel wire and wire products - Non-ferrous metallic coatings on steel wire - General principles |
| BS EN 10244-2-2001 | 閽笣鍙婂叾鍒跺搧.閽笣涓婄殑闈炴湁鑹查噾灞炴秱灞?閿屽拰閿屽悎閲戞秱灞侟/td> | Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Zinc or zinc alloy coatings |
| BS EN 10244-3-2001 | 閽笣鍙婂叾鍒跺搧.閽笣涓婄殑闈炴湁鑹查噾灞炴秱灞?閾濇秱灞侟/td> | Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Aluminium coatings |
| BS EN 10244-4-2001 | 閽笣鍙婂叾鍒跺搧.閽笣涓婄殑闈炴湁鑹查噾灞炴秱灞?閿℃秱灞侟/td> | Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Tin coatings |
| BS EN 10244-5-2001 | 閽笣鍙婂叾鍒跺搧.閽笣涓婄殑闈炴湁鑹查噾灞炴秱灞?闀嶆秱灞侟/td> | Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Nickel coatings |
| BS EN 10244-6-2001 | 閽笣鍙婂叾鍒跺搧.閽笣涓婄殑闈炴湁鑹查噾灞炴秱灞?閾?闈掗摐鎴栭粍閾滄秱灞侟/td> | Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Copper, bronze or brass coatings |
| BS EN 10245-1-2001 | 閽笣鍙婂叾鍒跺搧.閽笣涓婄殑鏈夋満娑傚眰.涓€鑸鍒橖/td> | Steel wire and wire products - Organic coatings on steel wire - General rules |
| BS EN 10245-2-2001 | 閽笣鍙婂叾鍒跺搧.閽笣涓婄殑鏈夋満娑傚眰.PVC绮惧埗绾军/td> | Steel wire and wire products - Organic coatings on steel wire - PVC finished wire |
| BS EN 10245-3-2001 | 閽笣鍙婂叾鍒跺搧.閽笣涓婄殑鏈夋満娑傚眰.PE娑傚眰绾军/td> | Steel wire and wire products - Organic coatings on steel wire - PE coated wire |
| BS EN 10245-4-2003 | 閽笣鍜岄挗涓濅骇鍝?閽笣涓婄殑鏈夋満娑傚眰.鑱氶叝娑傝閽笣 | Steel wire and wire products - Organic coatings on steel wire - Polyester coated wire |
| BS EN 10288-2002 | 宀镐笂鍜岃繎娴风閬撶敤閽㈢鍙婇厤浠?澶栭儴鐨勫弻灞傛尋鍘嬭仛涔欑儻鍩烘秱灞侟/td> | Steel tubes and fittings for onshore and offshore pipelines - External two layer extruded polyethylene based coatings |
| BS EN 10290-2002 | 宀镐笂鍜岃繎娴疯緭娌圭鐢ㄩ挗绠″拰閰嶄欢.鐢ㄤ簬澶栭儴娑蹭綋鐨勮仛姘ㄩ叝鍜屾敼鎬ц仛姘ㄩ叝鑴傛秱灞侟/td> | Steel tubes and fittings for onshore and offshore pipelines - External liquid applied polyurethane and polyurethane-modified coatings |
| BS EN 10300-2005 | 杩戝哺鍜屾捣涓婄閬撶敤閽㈢鍜岄厤浠?澶栨秱灞傜敤娌ラ潚鐑秱瑕嗘潗鏂橖/td> | Steel tubes and fittings for onshore and offshore pipelines - Bituminous hot applied materials for external coating |
| BS EN 10301-2003 | 宀镐笂鍙婃捣搴曠閬撶敤閽㈢鍙婇厤浠?闈炶厫铓€鎬ф皵浣撶殑杈撻€佺敤鍑忓皯鎽╂摝鐨勫唴娑傚眰 | Steel tubes and fittings for on and offshore pipelines - Internal coating for the reduction of friction for conveyance of non corrosive gas |
| BS EN 10310-2004 | 宀镐笂鍜屾捣搴曠璺敤閽㈢鍜岄厤浠?鑱氶叞鑳虹矇鏈熀鍐呭娑傚眰 | Steel tubes and fittings for onshore and offshore pipelines - Internal and external polyamide powder based coatings |
| BS EN 1071-4-2006 | 楂樼骇宸ヤ笟闄剁摲.闄剁摲娑傚眰鐨勮瘯楠屾柟娉?鐢ㄧ數瀛愭帰閽堝井閲忓垎鏋?EPMA)娴嬪畾鍖栧鎴愬垎 | Advanced technical ceramics - Methods of test for ceramic coatings - Determination of chemical composition by electron probe microanalysis (EPMA) |
| BS EN 1096-1-1999 | 寤虹瓚鐜荤拑.娑傚眰鐜荤拑.瀹氫箟鍜屽垎绫狐/td> | Glass in building - Coated glass - Definitions and classification |
| BS EN 1096-2-2001 | 寤虹瓚鐗╃幓鐠?娑傚眰鐜荤拑.A,B,S娑傚眰鐨勮姹傚拰璇曢獙鏂规硶 | Glass in building - Coated glass - Requirements and test methods for class A, B and S coatings |
| BS EN 1096-3-2001 | 寤虹瓚鐗╃幓鐠?娑傚眰鐜荤拑.C,D娑傚眰鐨勮姹傚拰璇曢獙鏂规硶 | Glass in building - Coated glass - Requirements and test methods for class C and D coatings |
| BS EN 1096-4-2004 | 寤虹瓚鐜荤拑.娑傚眰鐜荤拑.鍚堟牸璇勪环/浜у搧鏍囧噯 | Glass in building - Coated glass - Evaluation of conformity/Product standard |
| BS EN 12068-1999 | 闃存瀬淇濇姢.鍩嬩簬鍦颁笅鐨勬垨娴镐簬姘翠腑鐨勯挗绠″閮ㄩ槻鑵愭湁鏈烘秱灞?纾佸甫鍜屽彲缂╂潗鏂橖/td> | Cathodic protection - External organic coatings for the corrosion protection of buried or immersed steel pipelines used in conjunction with cathodic protection - Tapes and shrinkable materials |
| BS EN 12206-1-2004 | 棰滄枡鍜屾竻婕?寤虹瓚鐢ㄩ摑鍜岄摑鍚堥噾娑傚眰.娑傝绮夋湯鍒舵秱灞侟/td> | Paints and varnishes - Coating of aluminium and aluminium alloys for architectural purposes - Coatings prepared from coating powder |
| BS EN 12280-1-1998 | 姗¤兌鎴栧鏂欐秱灞傜粐鐗?鍔犻€熻€佸寲璇曢獙.鐑€佸寲 | Rubber- or plastics-coated fabrics - Accelerated ageing tests - Heat ageing |
| BS EN 12280-2-2002 | 姗¤兌鎴栧鏂欐秱灞傜粐鐗?鍔犻€熻€佸寲璇曢獙.鐗╃悊鎬ц€佸寲:鍏夊拰姘斿€欑殑褰卞搷 | Rubber- or plastics-coated fabrics - Accelerated ageing tests - Physical ageing: effect of light or weathering |
| BS EN 12280-3-2002 | 姗¤兌鎴栧鏂欐秱灞傜粐鐗?鍔犻€熻€佸寲璇曢獙.鐜鑰佸寲 | Rubber- or plastics-coated fabrics - Accelerated ageing tests - Environmental ageing |
| BS EN 12373-10-1999 | 閾濆拰閾濆悎閲?闃虫瀬姘у寲.浣跨敤纾ㄦ崯灏勬祦璁惧娴嬪畾闃虫瀬姘у寲闀€娑傚眰涓昏鐗规畩纾ㄦ崯鎶楁€?/td> | Aluminium and aluminium alloys - Anodizing - Measurement of mean specific abrasion resistance of anodic oxidation coatings using an abrasive jet test apparatus |
| BS EN 12373-2-1999 | 閾濆拰閾濆悎閲?闃虫瀬姘у寲.闃虫瀬姘у寲娑傚眰鍗曚綅闈㈢Н(琛ㄩ潰瀵嗗害)璐ㄩ噺鐨勬祴瀹?閲嶉噺鍓傛硶 | Aluminium and aluminium alloys - Anodizing - Determination of mass per unit area (surface density) of anodic oxidation coatings - Gravimetric method |
| BS EN 12373-3-1999 | 閾濆拰閾濆悎閲?闃虫瀬姘у寲.闃虫瀬姘у寲娑傚眰鍗曚綅闈㈢Н(琛ㄩ潰瀵嗗害)璐ㄩ噺鐨勬祴瀹?鍒嗘潫鏄惧井闀滄棤鎹熸祴閲廃/td> | Aluminium and aluminium alloys - Anodizing - Determination of thickness of anodic oxidation coatings - Non-destructive measurement by split-beam microscope |
| BS EN 12472-2005 | 娑傚眰閮ㄤ欢闀嶉噴鏀鹃噺鐨勬娴嬬敤纾ㄦ崯鍜岃厫铓€鐨勬ā鎷熸柟娉旤/td> | Method for the simulation of wear and corrosion for the detection of nickel release from coated items |
| BS EN 12487-2007 | 閲戝睘鐨勮厫铓€闃叉姢.閾濆拰閾濆悎閲戜笂缁忔竻娲楀拰鏈竻娲楃殑閾吀鐩愯浆鍖栨秱灞侟/td> | Corrosion protection of metals - Rinsed and non-rinsed chromate conversion coatings on aluminium and aluminium alloys |
| BS EN 12508-2000 | 閲戝睘鍜屽悎閲戠殑鑵愯殌淇濇姢.琛ㄩ潰澶勭悊,閲戝睘鍜屽叾瀹冩棤鏈烘秱灞?鏈 | Corrosion protection of metals and alloys - Surface treatment, metallic and other inorganic coatings - VOCabulary |
| BS EN 12757-1-2005 | 娑傚眰鏉愭枡鐢ㄦ悈鎷屾満姊?瀹夊叏瑕佹眰.杞﹁締琛ㄩ潰鏁翠慨鐢ㄧ殑鎼呮枡鏈烘 | Mixing machinery for coating materials - Safety requirements - Mixing machinery for use in vehicle refinishing |
| BS EN 12981-2005 | 娑傚眰璁惧.鍠锋秱鏈夋満绮夋湯娑傚眰鏉愭枡鐨勫柗娑傚.瀹夊叏瑕佹眰 | Coating plants - Spray booths for application of organic powder coating material - Safety requirements |
| BS EN 13113-2002 | 鍒堕潻鏈?婊氬姩娑傚眰鏈虹殑瀹夊叏鎬ц姹侟/td> | Tannery machines - Roller coating machines - Safety requirements |
| BS EN 13144-2003 | 閲戝睘鍜屽叾浠栨棤鏈烘秱灞?鐢ㄦ姉鎷夎瘯楠屽畾閲忔祴閲忕矘鐫€鎬х殑鏂规硶 | Metallic and other inorganic coatings - Method for quantitative measurement of adhesion by tensile test |
| BS EN 13266-2002 | 缂撴參閲婃斁鍖栬偉.鐢ㄦ秱灞傝偉鏂欐硶娴嬪畾钀ュ吇閲婃斁鎬ц兘 | Slow-release fertilizers - Determination of the release of the nutrients - Method for coated fertilizers |
| BS EN 13360-2002 | 姗¤兌鎴栧鏂欐秱灞傜粐鐗?鏈 | Rubber- or plastics-coated fabrics - Terminology |
| BS EN 13438-2005 | 娑傛枡鍜屾竻婕?寤虹瓚鐢ㄩ晙閿屾垨闀€閿岀矇閽骇鍝佺敤鐨勭矇鏈湁鏈烘秱灞侟/td> | Paints and varnishes - Powder organic coatings for galvanized or sherardised steel products for construction purposes |
| BS EN 13523-1-2001 | 鍗锋潗瑕嗗眰閲戝睘.璇曢獙鏂规硶.娑傚眰鍘氬害 | Coil coated metals - Test methods - Coating thickness |
| BS EN 13676-2001 | 鎺ヨЕ椋熷搧鐨勮仛鍚堢墿娑傚眰绾稿拰绾告澘.閽堝瓟妫€娴婞/td> | Polymer coated paper and board intended for food contact - Detection of pinholes |
| BS EN 13811-2003 | 绮夋湯闀€閿?閾佷骇鍝佷笂閿屾墿鏁ｆ秱灞?瑙勮寖 | Sherardizing - Zinc diffusion coatings on ferrous products - Specification |
| BS EN 13920-15-2003 | 閾濆拰閾濆悎閲?搴熸枡.宸插幓闄ゅ簾閾濆寘瑁呬欢涓秱灞傜殑閾濆簾鏂橖/td> | Aluminium and aluminium alloys - Scrap - Decoated aluminium scrap from post-consumer aluminium packagings |
| BS EN 13938-6-2004 | 姘戠敤鐖嗙偢鐗?鎺ㄨ繘鍓傚拰鐏鎺ㄨ繘鍓?鍥烘€佺伀绠帹杩涘墏.鎶戝埗鍓傛秱灞傚畬鏁存€х殑娴嬪畾鎸囧崡 | Explosives for civil uses - Propellants and rocket propellants - Solid rocket propellants - Guide for the determination of integrity of inhibitor coatings |
| BS EN 13966-1-2003 | 娑叉€佹秱灞傛潗鏂欑敤闆惧寲鍙婂柗娑傝澶囪緭閫佹晥鐜囩殑娴嬪畾.骞虫澘鏉狘/td> | Determination of the transfer efficiency of atomising and spraying equipment for liquid coating materials - Flat panels |
| BS EN 1403-1998 | 閲戝睘鑵愯殌闃叉姢.鐢甸晙娑傚眰.涓€鑸姹傜殑瑙勫畾鏂规硶 | Corrosion protection of metals - Electrodeposited coatings - Method of specifying general requirements |
| BS EN 14099-2002 | 鑸ぉ浜у搧淇濊瘉.鐢ㄥ帇鏁忓甫娴嬮噺娑傚眰鐨勫墺绂诲拰鎾曞紑寮哄害 | Space product assurance - Measurement of the peel and pull-off strength of coatings and finishes using pressure-sensitive tapes |
| BS EN 14431-2005 | 閲夊拰鎼摲.鐢ㄤ簬寤虹瓚閽㈡澘鐨勭摲閲夋秱灞傜殑鐗规€?/td> | Vitreous and porcelain enamels - Characteristics of the enamel coatings applied to steel panels intended for architecture |
| BS EN 14628-2005 | 鐞冨ⅷ閾搁搧绠°€侀厤浠跺拰闄勪欢.绠￠亾澶栭儴鑱氫箼鐑秱灞?瑕佹眰鍜岃瘯楠屾柟娉旤/td> | Ductile iron pipes, fittings and accessories - External polythene coating for pipes - Requirements and test methods |
| BS EN 14863-2005 | 閲夌摲鍜屾惇鐡?鐑氦鎹㈠櫒涓娇鐢ㄧ殑娑傛惇鐡烽挗鏉跨殑杈圭紭娑傚眰鐨勬祴瀹欬/td> | Vitreous and porcelain enamels 鈥 Determination of the edge covering on enamelled steel plate to be used in heat exchangers |
| BS EN 14879-1-2005 | 宸ヤ笟璁惧闃茶厫铓€浠嬭川鑵愯殌鐢ㄦ湁鏈烘秱灞傜郴缁熷拰鍐呰‖.琛簳鐨勬湳璇€佽璁″拰鍒跺 | 0rganic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Terminology, design and preparation of substrate |
| BS EN 14879-2-2006 | 闃叉宸ヤ笟瑁呯疆鍜岃澶囧彈渚佃殌鐗╀綋鑵愯殌鐢ㄦ湁鏈烘秱瑕嗙郴缁熷拰琛枡.绗?閮ㄥ垎:閲戝睘鏋勪欢娑傚眰 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media 鈥 Part 2: Coatings on metallic components |
| BS EN 14879-3-2006 | 闃叉渚佃殌鐗╀綋鑵愯殌宸ヤ笟瑁呯疆鍜岃澶囩敤鏈夋満娑傚眰绯荤粺鍜岃‖鏂?绗?閮ㄥ垎:娣峰嚌鍦熸瀯浠舵秱灞侟/td> | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media 鈥 Part 3: Coatings on concrete components |
| BS EN 14879-4-2007 | 闃叉宸ヤ笟瑁呯疆鍜岃澶囧彈渚靛叆浠嬭川鑵愯殌鐨勬湁鏈烘秱灞傜郴缁熷拰琛枡.閲戝睘鏋勪欢琛枡 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Linings on metallic components |
| BS EN 14879-5-2007 | 闃叉宸ヤ笟瑁呯疆鍜岃澶囧彈渚靛叆浠嬭川鑵愯殌鐨勬湁鏈烘秱灞傜郴缁熷拰琛枡.娣峰嚌鍦熸瀯浠惰‖鏂橖/td> | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Linings on concrete components |
| BS EN 14882-2005 | 姗¤兌鎴栧鏂欐秱灞傜粐鐗?闈欐懇鎿﹀拰鍔ㄦ懇鎿︾郴鏁扮殑娴嬪畾 | Rubber or plastic coated fabrics - Determination of the static and dynamic coefficient of friction |
| BS EN 14901-2006 | 鐞冨ⅷ閾搁搧绠°€侀厤浠跺拰闄勪欢.鐞冨ⅷ閾搁搧閰嶄欢鍙婇檮浠剁殑鐜哀娑傚眰(閲嶈浇).瑕佹眰鍜岃瘯楠屾柟娉旤/td> | Ductile iron pipes, fittings and accessories - Epoxy coating (heavy duty) of ductile iron fittings and accessories - Requirements and test methods |
| BS EN 15189-2006 | 鐞冨ⅷ閾搁搧绠°€侀厤浠跺拰闄勪欢.绠￠亾澶栭儴鑱氫簹瀹夐叝娑傚眰.瑕佹眰鍜岃瘯楠屾柟娉旤/td> | Ductile iron pipes, fittings and accessories - External polyurethane coating for pipes - Requirements and test methods |
| BS EN 15205-2006 | 娴嬪畾闃茶厫娑傚眰鍏环閾厓绱?璐ㄩ噺鍒嗘瀽 | Determination of hexavalent chromium in corrosion protection layers - Qualitative analysis |
| BS EN 15340-2007 | 鐑柗娑?鐑柗娑傚眰鑰愬壀鍒囪礋鑽风殑娴嬪畾 | Thermal spraying - Determination of shear load resistance of thermally sprayed coatings |
| BS EN 1876-1-1998 | 姗¤兌鎴栧鏂欐秱灞傜粐鐗?浣庢俯璇曢獙.寮洸璇曢獙 | Rubber- or plastics-coated fabrics - Low temperature tests - Bending test |
| BS EN 1910-2000 | 鏈ㄦ潗銆佹嫾鑺卞湴鏉垮拰鏈ㄦ潗闀舵澘鍙婃秱灞?灏哄绋冲畾鎬ф祴瀹欬/td> | Wood and parquet flooring and wood panelling and cladding - Determination of dimensional stability |
| BS EN 2437-2002 | 鑸┖鑸ぉ绯诲垪.閾濆強閾濆悎閲戠殑閾吀鐩愯浆鍖栨秱灞?榛勮壊) | Aerospace series - Chromate conversion coatings (yellow) for aluminium and aluminium alloys |
| BS EN 2591-508-2002 | 鐢垫皵鍜屽厜瀛﹁繛鎺ュ厓浠?璇曢獙鏂规硶.瑙︾偣娑傚眰鍘氬害鐨勬祴閲廃/td> | Elements of electrical and optical connection - Test methods - Measurement of thickness of coating on contacts |
| BS EN 2591-509-2001 | 鐢垫皵鍜屽厜瀛﹁繛鎺ュ厓浠?璇曢獙鏂规硶.瑙︾偣娑傚眰鐨勯檮鐫€鍔汓/td> | Elements of electrical and optical connection - Test methods - Adhesion of coating on contacts |
| BS EN 28094-1994 | 杈撻€佹満鐢ㄩ挗涓濆笜甯冭緭閫佸甫.澶硅姱灞傛秱灞傜矘闄勫己搴﹁瘯楠孅/td> | Steel cord conveyor belts - Adhesion strength test of the cover to the core layer |
| BS EN 2828-1993 | 閲囩敤鎶涘厜娉曞閲戝睘娑傚眰鐨勭矘鍚堣瘯楠孅/td> | Adhesion test for metallic coatings by burnishing |
| BS EN 4421-2007 | 鑸┖鑸ぉ绯诲垪.甯﹂敮榻跨姸銆佽€愯厫铓€閽㈤攣绱х幆鐨勩€侀晙MoS2娑傚眰鐨勩€乀I-P64001閽涘悎閲戣灪鏌?寮哄害绛夌骇:1100MPa(鐜娓╁害 | Aerospace series - Studs, in titanium alloy TI-P64001, MoS2 coated, with serrated locking ring in corrosion resisting steel - Strength class: 1 100 MPa (at ambient temperature) |
| BS EN 4458-2005 | 鑸┖鑸ぉ绯诲垪.甯﹂敮榻跨姸閿佺揣鐜€愯厫铓€閽㈤晙MoS2娑傚眰鐨凾I-P64001鍨嬮挍鍚堥噾MJ铻虹汗铻烘煴.寮哄害绛夌骇:1100MPa(瀹ゆ俯).鎶€ | Aerospace series - Studs, MJ threads, in titanium alloy TI-P64001 , MoS2 coated, with serrated locking ring in corrosion resisting steel.Strengt h class: 1100 MPa (at ambient temperature) - Technicalspecification |
| BS EN 4496-2005 | 鑸┖鑸ぉ绯诲垪.鏈夎壊閾濇秱灞傘€侀槼鏋佸寲鐨勩€侀挍鍚堥噾銆佺煭铻虹汗銆佺揣鍏樊鏍囩О鏉嗐€佸亸浣嶅崄瀛楀嚬妲芥矇澶存爣绉?00 掳铻洪拤.绛夌骇 | Aerospace series - Screws, 100 掳 countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating - Classification: 1 100 MPa (at ambient temperature) / 315 掳C |
| BS EN 4497-2005 | 鑸┖鑸ぉ绯诲垪.鏈夎壊閾濇秱灞傘€侀槼鏋佸寲鐨勩€侀挍鍚堥噾銆佺煭铻虹汗銆佺揣鍏樊鏍囩О鏉嗐€佸亸浣嶅崄瀛楀嚬妲界洏澶磋灪閽?绛夌骇:1100MPa( | Aerospace series - Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating - Classification: 1 100 MPa (at ambient temperature) / 315 掳C |
| BS EN 4498-2005 | 鑸┖鑸ぉ绯诲垪.鏈夎壊閾濇秱灞傘€侀挐鍖栫殑銆佽€愮儹闀嶅熀鍚堥噾銆佷腑绛夐暱搴﹁灪绾广€佺揣鍏樊鏍囩О鏉嗐€佸ぇ鍙屽叚瑙掑ご铻烘爴.绛夌骇:1550M | Aerospace series - Bolts, large bihexagonal head, close tolerance normal shank, medium length thread, in heat resisting nickel base alloy, passivated, with aluminium pigmented coating - Classification: 1 550 MPa (at ambient temperature) / 315 掳C |
| BS EN 4501-2006 | 鑸┖鑸ぉ绯诲垪.甯﹂晙閾濇秱灞傜殑闃虫瀬鐢甸晙閽涘悎閲戠煭铻虹汗绱у叕宸爣鍑嗘焺姝ｅ叚瑙掑ご铻烘爴銆佺背鍒剁郴鍒?绛夌骇:1100MPa(瀹ゆ俯)/3 | Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating, metric series - Classification: 1100 MPa (at ambient temperature) / 315 掳C |
| BS EN 4509-2006 | 鑸┖鑸ぉ绯诲垪.甯﹂晙閾濇秱灞傞槼鏋佹哀鍖栫殑閽涘悎閲戣灪绾瑰欢浼稿埌铻哄ご100掳娌夊ご鍋忕疆鍗佸瓧鍑规Ы铻洪拤銆佺背鍒剁郴鍒?绛夌骇:1100MP | Screws, 100 掳 countersunk normal head, offset cruciform recess, threaded to head, in titanium alloy, anodized, with aluminium pigmented coating, metric series - Classification: 1 100 MPa (at ambient temperature)/315 掳C |
| BS EN 582-1994 | 鐑柗娑傚眰鐨勮瘯楠?鎶楁媺鑳剁矘寮哄害鐨勬祴瀹欬/td> | Thermal spraying - Determination of tensile adhesive strength |
| BS EN 60317-1996 | 鐗规畩鍨嬬粫缁勭嚎瑙勮寖.鑱氶叞浜氳兒娑傚眰鐨勮蒋鐒婅仛閰拌兒閰寘婕嗗渾閾滅嚎.130绫狐/td> | Specifications for particular types of winding wires. Solderable polyurethane enamelled round copper wire overcoated with polyamide, class 130 |
| BS EN 60317-21-1996 | 鐗圭缁曠粍绾胯鑼?鑱氶叞浜氳兒娑傚眰鐨勮蒋閽庣剨鑱氶叞鑳洪叝婕嗗寘鍦嗛摐绾?155绫狐/td> | Specifications for particular types of winding wires - Solderable polyurethane enamelled round copper wire overcoated with polyamide, class 155 |
| BS EN 60684-3-300-2002 | 缁濈紭杞绠?鍚勭鍨嬪彿杞绠¤鑼冭姹?鏃犳秱灞傜殑鐜荤拑绾ょ淮缂栫粐杞绠狘/td> | Specification for flexible insulating sleeving - Specification requirements for individual types of sleeving - Glass textile fibre sleeving, braided, uncoated |
| BS EN 60684-3-343 to 345-2002 | 缁濈紭杞绠¤鑼?鍚勭鍨嬪彿濂楃鐨勮鑼冭姹?鏃犳秱灞傚彲鎵╁紶缂栫粐鐨勪箼鐑?涓夋盁姘箼鐑?E-CTFE)绾虹粐濂楃 | Specification for flexible insulating sleeving - Specification requirements for individual types of sleeving - Expandable braided ethylene chlorotrifluoroethylene (E-CTFE) textile sleeving, uncoated - Sheets 343 to 345: Expandable braided ethylene chlorotrifluoroethylene (E-CTFE) textile sleeving, uncoated |
| BS EN 61249-5-4-1997 | 鍐呴儴杩炴帴缁撴瀯鏉愭枡.鏈夋垨鏃犳秱灞傜殑瀵肩數绠斿拰瀵肩數鑶滃垎瑙勮寖.瀵肩數澧ㄦ按 | Materials for interconnection structures - Sectional specification set for conductive foils and films with and without coatings - Conductive inks |
| BS EN 61249-8-7-1997 | 浜掕繛鎺ョ粨鏋勭敤鏉愭枡.涓嶅鐢佃杽鑶滃拰娑傚眰鍒嗚鑼?鎵撳嵃娌瑰ⅷ | Materials for interconnection structures - Sectional specification set for non-conductive films and coatings - Marking legend inks |
| BS EN 61249-8-8-1997 | 杩炴帴缁撴瀯鐢ㄦ潗鏂?闈炲鐢佃啘鍜屾秱灞傚垎瑙勮寖.涓存椂鑱氬悎鐗╄鑼傸/td> | Materials for interconnection structures - Sectional specification set for non-conductive films and coatings - Temporary polymer coatings |
| BS EN 61788-3-2006 | 瓒呭鎬?涓寸晫鐢垫祦娴嬮噺.娑傚眰閾舵垨閾跺悎閲戠殑Bi-2212鍜孊i-2223姘у寲瓒呭浣撶殑鐩存祦涓寸晫鐢垫祦 | Superconductivity - Part 3: Critical current measurement - DC critical current of Ag- and/or Ag alloy-sheathed Bi-2212 and Bi-2223 oxide superconductors |
| BS EN 846-13-2001 | 鍦伐鐢ㄧ殑杈呭姪閮ㄤ欢鐨勮瘯楠屾柟娉?鏈夋満娑傚眰鑰愬啿鍑绘€с€佽€愮（鎬у強鑰愯厫铓€鎬х殑娴嬪畾 | Methods of test for ancillary components for masonry - Determination of resistance to impact, abrasion and corrosion of organic coatings |
| BS EN ISO 105-X10-1996 | 绾虹粐鍝?鑹茬墷搴﹁瘯楠?绗琗10閮ㄥ垎:绾虹粐鍝侀鑹插悜鑱氭隘涔欑儻娑傚眰杩佺Щ鐨勮瘎瀹欬/td> | Textiles - Tests for colour fastness - Assessment of migration of textile colours into polyvinyl chloride coatings |
| BS EN ISO 11124-2-1994 | 鐢ㄦ秱灞傛潗鏂欏強鏈夊叧浜у搧娑傝鍓嶉挗鍩轰綋鐨勫噯澶囧伐浣?閲戝睘鍠锋儏鐞嗙（鏂欑殑瑙勮寖.鍐锋番閾佺爞绮扅/td> | Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Chilled-iron grit |
| BS EN ISO 11124-4-1994 | 鐢ㄦ秱灞傛潗鏂欐秱瑕嗗墠閽㈠熀浣撶殑棰勫鐞?鍠峰皠閲戝睘娓呯悊纾ㄦ枡鐨勮鑼?浣庣⒊閾搁挗涓伏/td> | Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Low-carbon cast-steel shot |
| BS EN ISO 11507-2007 | 娑傛枡鍜屾竻婕?娑傚眰鏆撮湶浜庝汉宸ラ铓€.鏆撮湶浜庤崸鍏夌传澶栫伅鍜屾按 | Paints and varnishes - Exposure of coatings to artificial weathering - Exposure to fluorescent UV lamps and water |
| BS EN ISO 11644-2003 | 鐨潻.娑傚眰绮樼潃鐗㈠害娴嬪畾鏂规硶 | Leather - Test for adhesion of finish |
| BS EN ISO 11998-2006 | 娑傛枡鍜屾竻婕?娑傚眰鑰愭箍娲楀拰娓呮磥搴︾殑娴嬪畾 | Paints and varnishes - Determination of wet-scrub resistance and cleanability of coatings |
| BS EN ISO 12683-2004 | 鏈烘闀€閿屾秱灞?瑙勮寖鍜岃瘯楠屾柟娉旤/td> | Mechanically deposited coatings of zinc - Specification and test methods |
| BS EN ISO 12944-1-1998 | 娑傛枡鍜屾竻婕?闃叉姢娑傚眰绯荤粺瀵归挗缁撴瀯鐨勮厫铓€闃叉姢.涓€鑸鏄嶞/td> | Paints and varnishes - Corrosion protection of steel structures by protective paint systems - General introduction |
| BS EN ISO 12944-2-1998 | 娑傛枡鍜屾竻婕?闃叉姢娑傚眰绯荤粺瀵归挗缁撴瀯鐨勮厫铓€闃叉姢.鐜鐨勫垎绫狐/td> | Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Classification of environments |
| BS EN ISO 12944-3-1998 | 娑傛枡鍜屾竻婕?闃叉姢娑傚眰绯荤粺瀵归挗缁撴瀯鐨勮厫铓€闃叉姢.璁捐鎵€闇€鑰冭檻鐨勮鍥犵礌 | Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Design considerations |
| BS EN ISO 12944-4-1998 | 娑傛枡鍜屾竻婕?闃叉姢娑傚眰绯荤粺瀵归挗缁撴瀯鐨勮厫铓€闃叉姢.琛ㄩ潰绫诲瀷鍜岃〃闈簣澶勭悊鍒跺 | Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Types of surface and surface preparation |
| BS EN ISO 12944-6-1998 | 娑傛枡鍜屾竻婕?闃叉姢娑傚眰绯荤粺瀵归挗缁撴瀯鐨勮厫铓€闃叉姢.瀹為獙瀹ゆ€ц兘璇曢獙鏂规硶 | Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Laboratory performance test methods |
| BS EN ISO 12944-7-1998 | 娑傛枡鍜屾竻婕?闃叉姢娑傚眰绯荤粺瀵归挗缁撴瀯鐨勮厫铓€闃叉姢.娑傛紗宸ヨ壓鐨勫疄鏂藉拰绠＄悊 | Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Execution and supervision of paintwork |
| BS EN ISO 12944-8-1998 | 娑傛枡鍜屾竻婕?闃叉姢娑傚眰绯荤粺瀵归挗缁撴瀯鐨勮厫铓€闃叉姢.鏂板伐鑹轰綔鍙婄淮淇鑼冪殑缂栧埗 | Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Development of specifications for new work and maintenance |
| BS EN ISO 1421-1998 | 姗¤兌鎴栧鏂欐秱灞傜粐鐗?鎷変几寮哄害鍜屾柇瑁備几闀跨巼鐨勬祴瀹欬/td> | Rubber-or plastics-coated fabrics - Determination of tensile strength and elongation at break |
| BS EN ISO 14373-2007 | 鐢甸樆鐒婃帴.鏃犳秱灞傚拰鏈夋秱灞備綆纰抽挗鐨勭偣鐒婄▼搴廃/td> | Resistance welding - Procedure for spot welding of uncoated and coated low carbon steels |
| BS EN ISO 1460-1995 | 閲戝睘闀€灞?閾佺被鏉愭枡鐨勭儹娴搁晙閿屾秱灞?鐢ㄩ噸閲忔祴瀹氭硶娴嬪畾鍗曚綅闈㈢Н閲嶉噺 | Metallic coatings - Hot dip galvanized coatings on ferrous materials - Gravimetric determination of the mass per unit area |
| BS EN ISO 14713-1999 | 閾佸拰閽㈢粨鏋勭殑闃茶厫.閿屽拰閾濇秱灞?鎸囧崡 | Protection against corrosion of iron and steel in structures - Zinc and aluminium coatings - Guidelines |
| BS EN ISO 15695-2001 | 閲夌摲鍜屾惇鐡?鎼摲娑傚眰鑰愬垝鐥曟€х殑娴嬪畾 | Vitreous and porcelain enamels - Determination of scratch resistance of enamel finishes |
| BS EN ISO 15720-2001 | 閲戝睘瑕嗗眰.瀛旈殭鐜囪瘯楠?鍑濊兌鏉愭枡鐢佃氨娉曟祴瀹氶噾灞炲熀浣撲笂閲戞垨閽秱灞傜殑瀛旈殭鐜嘃/td> | Metallic coatings - Porosity tests - Porosity in gold or palladium coatings on metal substrates by gel-bulk electrography |
| BS EN ISO 15721-2001 | 閲戝睘瑕嗗眰.瀛旈殭鐜囪瘯楠?鐢ㄤ簹纭吀鍜屼簩姘у寲纭捀姹藉閲戝拰閽秱灞傚瓟闅欑巼鐨勬祴瀹欬/td> | Metallic coatings - Porosity tests - Porosity in gold or palladium coatings by sulfurous acid/sulfur dioxide vapour |
| BS EN ISO 16276-1-2007 | 闃叉姢娑傛枡绯荤粺瀵归挗缁撴瀯鐨勮厫铓€闃叉姢.娑傚眰绮橀檮/绮樿仛(鏂寮哄害)鐨勮瘎瀹氬拰楠屾敹鏍囧噯.鑴辫惤娴嬭瘯 | Corrosion protection of steel structures by protective paint systems - Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating - Pull-off testing |
| BS EN ISO 16276-2-2007 | 闃叉姢娑傛枡绯荤粺瀵归挗缁撴瀯鐨勮厫铓€闃叉姢.娑傚眰绮橀檮/绮樿仛(鏂寮哄害)鐨勮瘎瀹氬拰楠屾敹鏍囧噯.鍒掓牸娴嬭瘯鍜孹鍒囧壊娴嬭瘯 | Corrosion protection of steel structures by protective paint systems - Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating - Cross-cut testing and X-cut testing |
| BS EN ISO 16348-2003 | 閲戝睘鍜屽叾浠栨棤鏈烘秱灞?瀹氫箟鍜岃〃瑙傜害瀹欬/td> | Metallic and other inorganic coatings - Definitions and conventions concerning appearance |
| BS EN ISO 16773-1-2007 | 娑傛枡鍜屾竻婕?楂橀樆鎶楁秱灞傝瘯鏍风殑鐢垫皵鍖栧闃绘姉棰戣氨(EIS).鏈鍜屽畾涔堻/td> | Paints and varnishes - Electrochemical impedance spectroscopy (EIS) on high-impedance coated specimens - Terms and definitions |
| BS EN ISO 16773-2-2007 | 娑傛枡鍜屾竻婕?楂橀樆鎶楁秱灞傝瘯鏍风殑鐢垫皵鍖栧闃绘姉棰戣氨(EIS).鏁版嵁鏀堕泦 | Paints and varnishes - Electrochemical impedance spectroscopy (EIS) on high-impedance coated specimens - Collection of data |
| BS EN ISO 17186-2003 | 鐨潻.鐗╃悊鍜屾満姊拌瘯楠?琛ㄩ潰娑傚眰鍘氬害鐨勬祴瀹欬/td> | Leather - Physical and mechanical tests - Determination of surface coating thickness |
| BS EN ISO 17233-2003 | 鐨潻.鐗╃悊鍜屾満姊拌瘯楠?琛ㄩ潰娑傚眰浣庢俯榫熻娓╁害鐨勬祴瀹欬/td> | Leather - Physical and mechanical tests - Determination of cold crack temperature of surface coatings |
| BS EN ISO 17834-2003 | 鐑柗娑?楂樻俯鑵愯殌鍜屾哀鍖栭槻鎶ゆ秱灞侟/td> | Thermal spraying - Coatings for protection against corrosion and oxidation at elevated temperatures |
| BS EN ISO 17872-2007 | 娑傛枡鍜屾竻婕?鑵愯殌璇曢獙鐢ㄩ噾灞炴澘娑傚眰鐢荤嚎鍣ㄦ爣璁扮殑鍏ラ棬鎸囧崡 | Paints and varnishes - Guidelines for the introduction of scribe marks through coatings on metallic panels for corrosion testing |
| BS EN ISO 20566-2005 | 娑傛枡鍜屾竻婕?瀹為獙瀹ゆ礂杞︽祴瀹氭秱灞傜郴缁熺殑鑰愬垝鐥曟€?/td> | Paints and varnishes - Determination of the scratch resistance of a coating system using a laboratory car-wash |
| BS EN ISO 20567-1-2005 | 娑傛枡鍜屾竻婕?娑傚眰鑰愮煶鐗囧垝鐥曟祴瀹?澶氬啿鍑绘祴璇旤/td> | Paints and varnishes - Determination of stone-chip resistance of coatings - Multi-impact testing |
| BS EN ISO 20567-2-2005 | 娑傛枡鍜屾竻婕?娑傚眰鑰愮煶鐗囧垝鐥曟祴瀹?甯﹀鍚戝啿鍑讳綋鐨勫崟鍐插嚮璇曢獙 | Paints and varnishes - Determination of stone-chip resistance of coatings - Single-impact test with a guided impact body |
| BS EN ISO 21227-2-2007 | 娑傛枡鍜屾竻婕?鐢ㄥ厜瀛︽垚璞¤瘎浼版秱灞傝〃闈㈢己闄?澶氬姛鑳界煶澶村垏鍓茶瘯楠岀殑璇勫畾瑙勭▼ | Paints and varnishes - Evaluation of defects on coated surfaces using optical imaging - Evaluation procedure for multi-impact stone-chipping test |
| BS EN ISO 21227-3-2007 | 娑傛枡鍜屾竻婕?鐢ㄥ厜瀛︽垚璞¤瘎瀹氭秱灞傝〃闈㈢己闄?鍒掔棔鍛ㄥ洿鍓ュ眰鍜岃厫铓€鐨勮瘎瀹欬/td> | Paints and varnishes - Evaluation of defects on coated surfaces using optical imaging - Evaluation of delamination and corrosion around a scribe |
| BS EN ISO 2286-2-1998 | 姗¤兌鎴栧鏂欐秱瑕嗙粐鐗?鍗锋枡鍙傛暟鐨勬祴瀹?娑傛枡鍗曚綅闈㈢Н鎬昏川閲忋€佸崟浣嶆秱灞傞潰绉殑璐ㄩ噺鍜屽熀浣撳崟浣嶉潰绉川閲忕殑娴嬪畾鏂规硶 | Rubber- or plastics-coated fabrics - Determination of roll characteristics - Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate |
| BS EN ISO 2411-2000 | 姗¤兌鎴栧鏂欐秱灞傜粐鐗?娑傚眰绮樺悎鍔涚殑娴嬪畾 | Rubber or plastics-coated fabrics - Determination of coating adhesion |
| BS EN ISO 2808-2007 | 鑹叉紗鍜屾竻婕?娑傚眰鍘氬害鐨勬祴瀹欬/td> | Paints and varnishes - Determination of film thickness |
| BS EN ISO 2810-2004 | 鑹叉紗鍜屾竻婕?娑傚眰鐨勮嚜鐒堕鍖?鏆撮湶鍜岃瘎瀹欬/td> | Paints and varnishes - Natural weathering of coatings - Exposure and assessment |
| BS EN ISO 3868-1995 | 閲戝睘鍜屽叾浠栨棤鏈虹墿娑傚眰.娑傚眰鍘氬害娴嬮噺.鑿茬储(Fizeau)澶氬厜鏉熷共娑変华娉旤/td> | Metallic and other non-organic coatings - Measurement of coating thicknesses - Fizeau multiple-beam interferometry method |
| BS EN ISO 4543-1995 | 閲戝睘闀€灞傚拰鍏跺畠鏃犳満鐗╂秱灞?鍌ㄥ瓨鑵愯殌璇曢獙涓€鑸绋婞/td> | Metallic and other non-organic coatings - General rules for corrosion tests applicable for storage conditions |
| BS EN ISO 4628-6-2007 | 娑傛枡鍜屾竻婕?娑傚眰闄嶈В鐨勮瘎瀹?缂洪櫡鏁伴噺鍜屽ぇ灏忓強澶栬〃鍧囪 鍙樺寲寮哄害鐨勬爣璇?鐢ㄧ矘鑳跺甫娉曡瘎浼扮矇鍖栫瓑绾?/td> | Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Assessment of degree of chalking by tape method |
| BS EN ISO 5470-2-2003 | 姗¤兌鎴栧鏂欐秱灞傜粐鐗?鑰愮（鎹熸€ф祴瀹?椹竵浠ｅ皵鐮旂（鍣?/td> | Rubber- or plastics-coated fabrics - Determination of abrasion resistance - Martindale abrader |
| BS EN ISO 6179-2001 | 纭寲鎴栫儹濉戞鑳?姗¤兌钖勬澘鍜屾鑳舵秱灞傜粐鐗?鎸ュ彂鎬ф恫浣撴墿鏁ｉ€熷害鐨勬祴瀹?閲嶅姏娴嬮噸鎶€鏈? | Rubber, vulcanized or thermoplastic - Rubber sheets and rubber-coated fabrics - Determination of transmission rate of volatile liquids (gravimetric technique) |
| BS EN ISO 6945-1996 | 姗¤兌杞.澶栨秱灞傝€愮（鎬х殑娴嬪畾 | Rubber hoses - Determination of abrasion resistance of the outer cover |
| BS EN ISO 6988-1986 | 閲戝睘娑傚眰鍜屽叾瀹冩棤鏈虹墿娑傚眰.鏅€氭按姹藉喎鍑濅簩姘у寲纭瘯楠孅/td> | Metallic and other non-organic coatings - Sulfur dioxide test with general condensation of moisture |
| BS EN ISO 7623-1996 | 閽笣缁宠姱杈撻€佸甫.缂嗙储娑傚眰绮樺悎鍔涜瘯楠?鍒濆璇曢獙鍜屽悗鏈熺儹閲忓鐞咟/td> | Steel cord conveyor belts - Cord-to-coating bond test - Initial test and after thermal treatment |
| BS EN ISO 8501-1-2007 | 娑傛枡鍜岀浉鍏充骇鍝佷娇鐢ㄥ墠閽㈣‖搴曠殑澶勭悊.琛ㄩ潰娓呮磥搴︾殑鐩祴璇勪及.鏈秱瑕嗛挗琛簳鍜屽交搴曟竻闄ゅ師鏈夋秱灞傚悗閽㈣‖搴曠殑閿堣殌绛堻/td> | Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings |
| BS EN ISO 8501-2-1996 | 娑傛补婕嗗拰鏈夊叧浜у搧鍓嶉挗鍩哄簳棰勫鐞?琛ㄩ潰娓呮磥搴︾殑鐩璇勫畾.灞€閮ㄥ幓闄ゅ師鏈夋秱灞傚悗閽㈠熀搴曠殑澶勭悊绛夌骇 | Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Preparation grades of previously coated steel substrates after localized removal of previous coatings |
| BS EN ISO 8980-4-2006 | 鐪肩鍏夊.鏈垏杈圭殑鎴愬搧鐪奸暅鐗?闃插弽灏勬秱灞傝鑼冨拰璇曢獙鏂规硶 | Ophthalmic optics - Uncut finished spectacle lenses - Specifications and test methods for anti-reflective coatings |
| BS F 131-1986 | 鑸┖鑸ぉ鐢ㄦ隘纾哄寲鑱氫箼鐑鑳舵秱灞傚凹榫欑粐鐗?300g/m)瑙勮寖 | Specification for chlorosulphonated polyethylene rubber coated nylon fabric (300 g/m2) for aerospace purposes |
| BS F 136-1989 | 鑸┖鑸ぉ鐢ㄦ隘纾哄寲鑱氫箼鐑鑳舵秱灞傚凹榫欑粐鐗?190g/m**2)瑙勮寖 | Specification for pigmented chlorosulphonated polyethylene rubber-coated nylon fabric (190 g/m2) for aerospace purposes |
| BS G 211-1971 | 浠〃绐楀彛涓庡厜妤旈檷浣庡弽灏勬秱灞傝鑼傸/td> | Specification for reflection-reducing coating of instrument windows and lighting wedges |
| BS ISO 10110-9-1996 | 鍏夊鍙婂厜瀛︿华鍣?鍏夊鍏冧欢鍜岀郴缁熷浘绾哥殑鍒跺.绗?閮ㄥ垎:琛ㄩ潰澶勭悊鍜屾秱灞侟/td> | Optics and optical instruments - Preparation of drawings for optical elements and systems - Surface treatment and coating |
| BS ISO 10587-2000 | 閲戝睘鍜屽叾瀹冩棤鏈鸿灞?閲戝睘瑕嗗眰鍜岄潪娑傚眰澶栬灪绾逛欢鍜屾鏉愭畫浣欒剢鎬ц瘯楠孅/td> | Metallic and other inorganic coatings - Test for residual embrittlement in both metallic-coated and uncoated externally-threaded articles and rods - Inclined wedge method |
| BS ISO 10713-1997 | 鐝犲疂.閲戝悎閲戞秱灞侟/td> | Jewellery - Gold alloy coatings |
| BS ISO 13779-4-2002 | 澶栫妞嶅叆鐗?缇熺７鐏扮煶.娑傚眰绮樼粨寮哄害鐨勬祴瀹欬/td> | Implants for surgery - Hydroxyapatite - Determination of coating adhesion strength |
| BS ISO 1434-1996 | 鍖呰寮忓ぉ鐒舵鑳?鍖呰娑傚眰閲忕殑娴嬪畾 | Natural rubber in bales - Amount of bale coating - Determination |
| BS ISO 14647-2000 | 閲戝睘娑傚眰.閲戝睘鍩鸿川閲戞秱灞傚瓟闅欑巼鐨勬祴瀹?纭濋吀钂稿彂璇曢獙 | Metallic coatings - Determination of porosity on gold coatings on metallic substrates - Nitric acid vapour test |
| BS ISO 14656-2000 | 娣峰嚌鍦熷姞绛嬮挗娑傚眰鐢ㄧ幆姘ф爲鑴傜矇鏈拰瀵嗗皝鏉愭枡 | Epoxy powder and sealing material for the coating of steel for the reinforcement of concrete |
| BS ISO 14788-2005 | 杩炵画鐑蹈闀€閿?%閾濆悎閲戞秱灞傞挗钖勬澘 | Continuous hot-dip zinc-5% aluminium alloy coated steel sheet |
| BS ISO 15724-2001 | 閲戝睘鍜屽叾瀹冩棤鏈烘秱灞?閽㈢殑鍙墿鏁ｆ阿鐨勭數鍖栨祴閲?鑼楄嵎鑺?Barnacle)鐢垫瀬娉旤/td> | Metallic and other inorganic coatings - Electrochemical measurement of diffusible hydrogen in steels - Barnacle electrode method |
| BS ISO 15730-2001 | 閲戝睘鍜屽叾浠栨棤鏈烘秱灞?閲囩敤鐢佃В鎶涘厜绮惧姞宸ュ拰閽濆寲涓嶉攬閽↑/td> | Metallic and other inorganic coatings - Electropolishing as a means of smoothing and passivating stainless steel |
| BS ISO 15741-2002 | 娌规紗鍜屾竻婕?宀镐笂鍜岃繎娴烽摵璁剧殑鏃犺厫铓€姘斾綋閽㈢閬撳唴渚х殑鍑忓皬鎽╂摝娑傚眰 | Paints and varnishes - Friction-reduction coatings for the interior of on- and offshore steel pipelines for non-corrosive gases |
| BS ISO 16132-2004 | 鐞冨ⅷ閾搁搧绠″拰閰嶄欢.姘存偿鐏版祮琛鐨勫瘑灏佹秱灞侟/td> | Ductile iron pipes and fittings - Seal coats for cement mortar linings |
| BS ISO 16172-2006 | 娉㈢汗閽㈢鐢ㄨ繛缁儹娴搁噾灞炴秱灞傞挗鏉军/td> | Continuous hot-dip metallic-coated steel sheet for corrugated steel pipe |
| BS ISO 20566-2005 | 鑹叉紗鍜屾竻婕?閫氳繃瀹為獙瀹ゆ礂杞︽祴瀹氭秱灞傜郴缁熺殑鑰愬垝鐥曟€?/td> | Paints and varnishes - Determination of the scratch resistance of a coating system using a laboratory car-wash |
| BS ISO 20567-1-2005 | 鑹叉紗鍜屾竻婕?娑傚眰鐨勮€愮煶鐗囧垝鎬х殑娴嬪畾.澶氬啿鍑昏瘯楠孅/td> | Paints and varnishes - Determination of stone-chip resistance of coatings - Multi-impact testing |
| BS ISO 20567-2-2005 | 鑹叉紗鍜屾竻婕?娑傚眰鐨勮€愮煶鐗囧垝鎬х殑娴嬪畾.瀵煎悜鍐插嚮浣撳崟鍐插嚮璇曢獙 | Paints and varnishes - Determination of stone-chip resistance of coatings - Single-impact test with a guided impact body |
| BS ISO 22778-2006 | 閲戝睘娑傚眰.鍦ㄩ搧鍜岄挗琛ㄩ潰涓婄墿鐞嗚捀鍙戞矇娣€闀?瑙勮寖鍜岃瘯楠屾柟娉旤/td> | Metallic coatings - Physical vapour-deposited coatings of cadmium on iron and steel - Specification and test methods |
| BS ISO 3011-1997 | 姗¤兌鎴栧鏂欐秱灞傜粐鐗?闈欐€佹潯浠朵笅鎶楄嚟姘ч緹瑁傜殑娴嬪畾 | Rubber- or plastics-coated fabrics - Determination of resistance to ozone cracking under static conditions |
| BS ISO 5473-1997 | 姗¤兌鎴栧鏂欐秱灞傜粐鐗?鑰愭尋鍘嬫€ф祴瀹欬/td> | Rubber or plastics-coated fabrics - Determination of crush resistance |
| BS ISO 6179-1998 | 纭寲鎴栫儹濉戞鑳?姗¤兌钖勬澘鏉愬拰姗¤兌娑傚眰缁囩墿.鎸ュ彂鎬ф恫浣撲紶杈撻€熷害娴嬪畾(姣旈噸娴嬮噺鎶€鏈? | Rubber, vulcanized or thermoplastic. Rubber sheets and rubber-coated fabrics. Determination of transmission rate of volatile liquids (gravimetric technique) |
| BS ISO 6452-2007 | 姗¤兌鎴栧鏂欐秱灞傜粐鐗?姹借溅鍐呰楗版潗鏂欓浘姘斿嚌缁撶壒寰佺殑娴嬪畾 | Rubber- or plastics-coated fabrics - Determination of fogging characteristics of trim materials in the interior of automobiles |
| BS ISO 7229-1997 | 姗¤兌鎴栧鏂欐秱灞傜粐鐗?閫忔皵鎬ф祴閲廃/td> | Rubber- or plastics-coated fabrics - Measurements of gas permeability |
| BS ISO 7989-1-2006 | 閽笣鍜岄挗涓濆埗鍝?閽笣鐨勬湁鑹查噾灞炴秱灞?涓€鑸師鍒橖/td> | Steel wire and wire products - Non-ferrous metallic coatings on steel wire - General principles |
| BS ISO 7989-2-2007 | 閽笣鍜岄挗涓濆埗鍝?閽笣鐨勬湁鑹查噾灞炴秱灞?閿屾垨閿屽悎閲戞秱瑕咟/td> | Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Zinc or zinc-alloy coating |
| BS ISO 9211-1-1995 | 鍏夊鍜屽厜瀛︿华鍣?鍏夊娑傚眰.瀹氫箟 | Optics and optical instruments - Optical coatings - Definitions |
| BS ISO 9211-2-1995 | 鍏夊鍜屽厜瀛︿华鍣?鍏夊娑傚眰.鍏夊鎬ц兘 | Optics and optical instruments - Optical coatings - Optical properties |
| BS ISO 9211-3-1995 | 鍏夊鍜屽厜瀛︿华鍣?鍏夊娑傚眰.鐜鑰愪箙鎬?/td> | Optics and optical instruments - Optical coatings - Environmental durability |
| BS ISO 9211-4-2006 | 鍏夊鍜屽厜瀛︿华鍣?鍏夊娑傚眰.鐗瑰畾鐨勮瘯楠屾柟娉旤/td> | Optics and optical instruments - Optical coatings - Specific test methods |
| BS L 109-1971 | 閾?閾?4.4)-闀?1.5)-閿?0.6)鍚堥噾閾濇秱灞傝杽鏉垮拰甯︽潗瑙勮寖(婧舵恫澶勭悊鍜屽娓╂椂鏁? | Specification for aluminium-coated sheet and strip of aluminium-copper-magnesium-manganese alloy (solution treated and aged at room temperature) (Cu 4.4, Mg 1.5, Mn 0.6) |
| BS L 110-1971 | 閾?閾?4.4)-闀?1.5)-閿?0.6)鍚堥噾閾濇秱灞傝杽鏉挎潗鍜屽甫鏉愯鑼?鐢辩敤鎴疯繘琛屾憾娑插鐞? | Specification for aluminium-coated sheet and strip of aluminium-copper-magnesium-manganese alloy (supplied for solution treatment by the user) (Cu 4.4, Mg 1.5, Mn 0.6) |
| BS L 163-1978 | 閾濇秱灞傞摑-閾?4.4)-闀?0.5)-纭?0.8)-閿?0.8)鍚堥噾钖勬澘鏉愬拰甯︽潗瑙勮寖(婧舵恫澶勭悊銆佸喎鍔犲伐鍘嬪钩鍜屽娓╂椂鏁? | Specification for sheet and strip of aluminium-coated aluminium-copper-magnesium-silicon-manganese alloy (solution treated , cold worked for flattening and aged at room temperature) (Cu 4.4, Mg 0.5, Si 0.8, Mn 0.8) |
| BS L 164-1978 | 閾濇秱灞傞摑-閾?4.4)-闀?0.5)-纭?0.8)-閿?0.8)鍚堥噾钖勬澘鏉愬拰甯︽潗瑙勮寖(鍥烘憾澶勭悊鍜屽娓╂椂鏁堢殑) | Specification for sheet and strip of aluminium-coated aluminium-copper-magnesium-silicon-manganese alloy (solution treated and aged at room temperature) (Cu 4.4, Mg 0.5, Si 0.8, Mn 0.8) |
| BS L 165-1978 | 閾濇秱灞傞摑-閾?4.4)-闀?0.5)-纭?0.8)-閿?0.8)鍚堥噾钖勬澘鏉愬拰甯︽潗瑙勮寖(鍥烘憾澶勭悊鍜屼汉宸ユ椂鏁堢殑) | Specification for sheet and strip of aluminium-coated aluminium-copper-magnesium-silicon-manganese alloy (solution treated and artificially aged) (Cu 4.4, Mg 0.5, Si 0.8, Mn 0.8) |
| BS L 166-1978 | 閾濇秱灞傞摑-閾?4.4)-闀?0.5)-纭?0.8)-閿?0.8)鍚堥噾绱у叕宸杽鏉挎潗鍜屽甫鏉愯鑼?婧舵恫澶勭悊鍜屽娓╂椂鏁? | Specification for close toleranced sheet and strip of aluminium-coated aluminium-copper-magnesium-silicon-manganese alloy (solution treated and aged at room temperature) (Cu 4.4, Mg 0.5, Si 0.8, Mn 0.8) |
| BS M 40-1972 | 鐢ㄦ棤鎹熻瘯楠屾硶娴嬮噺娑傚眰鍘氬害鐨勬柟娉旤/td> | Methods for measuring coating thickness by non-destructive testing |
| BS M 58-1986 | 閲囩敤纭吀澶勭悊宸ヨ壓鐨勯挍鍜岄挍鍚堥噾闃虫瀬娑傚眰瑙勮寖 | Specification for anodic coating of titanium and titanium alloys by the sulphuric acid process |
| DD ENV 1071-1-1994 | 楂樻妧鏈櫠鐡?闄剁摲娑傚眰鐨勮瘯楠屾柟娉?閫氳繃鎺ヨЕ鎺㈠ご杞粨娴嬪畾浠祴瀹氭秱灞傚帤搴?/td> | Advanced technical ceramics. Methods of test for ceramic coatings. Determination of coating thickness by contact probe profilometer |
| DD ENV 1071-2-1994 | 楂樻妧鏈櫠鐡?闄剁摲娑傚眰璇曢獙鏂规硶.鐢ㄥ垏澶寸（鍓婃硶瀵规秱灞傚帤搴︾殑娴嬪畾 | Advanced technical ceramics. Methods of test for ceramic coatings. Determination of coating thickness by the cap grinding method |
| DD ENV 1071-4-1996 | 楂樻妧鏈櫠鐡?闄剁摲娑傚眰璇曢獙鏂规硶.绗?閮ㄥ垎:鍖栧鎴愬垎娴嬪畾 | Advanced technical ceramics. Methods of test for ceramic coatings. Determination of chemical composition |
| DD ENV 1071-5-1995 | 楂樻妧鏈櫠鐡?闄剁摲娑傚眰璇曢獙鏂规硶.绗?閮ㄥ垎:瀛旈殭搴︾殑娴嬪畾 | Advanced technical ceramics. Methods of test for ceramic coatings. Determination of porosity |
| DD ENV 927-2-2000 | 娑傛枡鍜屾竻婕?澶栭儴鏈ㄦ潗鐢ㄦ秱灞傛潗鏂欏拰娑傚眰鏂规硶.鎬ц兘瑙勮寖 | Paints and varnishes. Coating materials and coating systems for exterior wood. Performance specification |
m.cnreagent.com
