Some analysis techniques may be affected by alumina or silica dust (Al2O3at SiO2) - the materials normally used to construct furnace chambers. To avoid this the GSM furnace chamber is constructed from a fused quartz material.
This design also offers superior containment of aggressive and corrosive vapours such as sulphuric, nitric and hydrochloric acids by keeping them away from the heating elements.
Additionally if an optional gas inlet is specified, the enclosed design minimises gas leakages from the chamber.
标准参数
最高工作温度1100℃
熔石英内膛，适用于氧化铝或二氧化硅污染检测结果分析
炉腔具有良好的防化学腐蚀性，可耐如硫酸、硝酸、盐酸蒸汽
陶瓷纤维低热质保温材料制成的炉门
4 sided heating (2 sides, roof, hearth)
选项(订购时详细标注要求)
气体入气口 (熔石英内膛具有良好的防腐蚀性)
Sample trays & racks
A range of sophisticated digital controllers, multi-segment programmers and data loggers is available. These can be fitted with RS232, RS485 or Ethernet communications
内容可能会被修改或更正。
GSM 11/8
| 最高温度（℃） |
1100 |
| 加热时间(mins) |
70 |
| 最高持续工作温度 |
1000 |
| 尺寸: 内部 高 x 宽 x 纵深 (mm) |
120 x 175 x 345 |
| 尺寸: 外部 高 x 宽 x 纵深 (mm) |
655 x 435 x 750 |
| 尺寸: 炉门开启时外部尺寸高 x 宽 x 纵深 (mm) |
895 x 435 x 750 |
| 尺寸: 与烟囱同高(mm) |
1060 |
| 体积 (L) |
8 |
| 最大功率 (W) |
3050 |
| 持续功率 (W) |
1700 |
| 热电偶种类 |
K |
| 重量 (kg) |
57 |
请注意：
- Heat up rate is measured to 100°C below max, using an empty chamber
- Holding power is measured at continuous operating temperature
- The maximum depth to accommodate the door opening arc is 810mm
- Maximum power and heat up times based on a 240V supply
内容可能会被修改或更正。
