The HB top hat furnace range has an automatically operated vertically moving hood for heat treatment in air. The moving hood design allows samples to be accessed from three sides. The HB can be equipped with CrFeAl heating wires up 1300 ℃ or with MoSi2heating elements for temperatures up to 1800 ℃.
The HB hood furnaces are available with usable volumes of 80 to 514 litres with the inner space being rectangular in design and the base plate having a convenient height of 750 mm. The hood moves up and down automatically to load and unload the sample.
All debinding applications require the use of an optional afterburner. The afterburner is driven by propane gas and compressed air to burn any evaporating binder.
Carbolite Gero specializes in custom designed furnaces and can also create a customised version of the HB to accommodate specific heat treatment needs. It is possible to equip a gas circulating system to improve temperature uniformity. Several sample thermocouples can be inserted into the furnace chamber to monitor and test the temperature profile. Through the use of a serial interface, the thermocouple data is logged at predefined intervals for evaluation.
The furnace is operated manually with a Eurotherm controller. Other controllers are available upon request.
应用实例
annealing, ceramic injection moulding (CIM), debinding, debinding in air, degassing, drying, sintering, sintering in air, sublimation, synthesis, tempering
标准参数
1300 ℃, 1600 ℃, 1700 ℃ & 1800 ℃ maximum operating temperatures
Carbolite Gero 3216CC controller with single ramp to set point and process timer
From 80 to 514 litre capacities
FeCrAl wire heating elements for 1300 ℃ models
High quality molybdenum disilicide heating elements for 1600 ℃, 1700 ℃ and 1800 ℃ models
炉膛采用优质耐火砖和低能耗轻质保温材料
选项(订购时详细标注要求)
A range of sophisticated digital controllers, multi-segment programmers and data loggers is available. These can be fitted with RS232, RS485 or Ethernet communications
过温保护
Other sizes on request
Gas inlet for operation under modified atmosphere (not gas tight)
Afterburner for debinding applications
技术参数
View inside of the HB Hood Furnace
heating elements
ceramic fibre insulation
bottom plate in 750 mm height
automatic moving hood
location of the rotameter
bottom heater only for CrFeAl heating elements
内容可能会被修改或更正。
HB__/80
| 最高温度（℃） |
1300, 1600, 1700, 1800 |
| Volume (l) |
80 |
| Uniformity between 800°C and Tmax (°C) [DIN 17052] |
± 5 |
| Max. heat-up rate (°C/min) |
5, 10, 10, 10 |
| Cooling time (h) |
12, 14, 14, 14 |
| 尺寸: 内部 高 x 宽 x 纵深 (mm) |
500 x 400 x 400 |
| 尺寸: 外部 高 x 宽 x 纵深 (mm) |
2200 x 1200 x 1200 |
| Max power (kW) |
15, 45, 50, 60 |
HB__/160
| 最高温度（℃） |
1300, 1600, 1700, 1800 |
| Volume (l) |
160 |
| Uniformity between 800°C and Tmax (°C) [DIN 17052] |
± 5 |
| Max. heat-up rate (°C/min) |
5, 10, 10, 10 |
| Cooling time (h) |
14, 14, 14, 14 |
| 尺寸: 内部 高 x 宽 x 纵深 (mm) |
500 x 800 x 400 |
| 尺寸: 外部 高 x 宽 x 纵深 (mm) |
2200 x 1800 x 1200 |
| Max power (kW) |
30, 80, 85, 90 |
HB__/240
| 最高温度（℃） |
1300, 1600, 1700, 1800 |
| Volume (l) |
240 |
| Uniformity between 800°C and Tmax (°C) [DIN 17052] |
-- |
| Max. heat-up rate (°C/min) |
-- |
| Cooling time (h) |
14 |
| 尺寸: 内部 高 x 宽 x 纵深 (mm) |
500 x 1200 x 400 |
| 尺寸: 外部 高 x 宽 x 纵深 (mm) |
2200 x 2200 x 1200 |
| Max power (kW) |
-- |
HB__/332
| 最高温度（℃） |
1300, 1600, 1700, 1800 |
| Volume (l) |
332 |
| Uniformity between 800°C and Tmax (°C) [DIN 17052] |
-- |
| Max. heat-up rate (°C/min) |
-- |
| Cooling time (h) |
-- |
| 尺寸: 内部 高 x 宽 x 纵深 (mm) |
550 x 1100 x 550 |
| 尺寸: 外部 高 x 宽 x 纵深 (mm) |
2400 x 2200 x 1400 |
| Max power (kW) |
-- |
HB__/514
| 最高温度（℃） |
1300, 1600, 1700, 1800 |
| Volume (l) |
514 |
| Uniformity between 800°C and Tmax (°C) [DIN 17052] |
-- |
| Max. heat-up rate (°C/min) |
-- |
| Cooling time (h) |
-- |
| 尺寸: 内部 高 x 宽 x 纵深 (mm) |
780 x 1200 x 550 |
| 尺寸: 外部 高 x 宽 x 纵深 (mm) |
2700 x 2200 x 1400 |
| Max power (kW) |
-- |
请注意：
- Maximum continuous operating temperature is 100 °C below maximum temperature
内容可能会被修改或更正。
