Stainless Steel thickness : 0.021 microns
| 璁㈣揣鍙饵/strong> |
鍖呰瑙勬牸 |
| Sizes |
| 164-001-35 |
150mm x 150mm |
| 500-165-74 |
300mm x 300mm |
| 520-720-06 |
500mm x 500mm |
| 090-007-73 |
1000mm x 1000mm |
浜у搧鍙傛暟
| Metallised With[] |
Stainless Steel |
| Ohms/Square[娆у/骞虫柟] |
200 |
| Surface Finish[琛ㄩ潰鍏夋磥搴 |
Metallised On One Side |
| Thickness[鍘氬害] |
0.036mm |
| Chemical Resistance(鑰愬寲瀛︽€? |
| Acids - concentrated |
Good-Poor |
| Acids - dilute |
Good |
| Alcohols |
Good |
| Alkalis |
Poor |
| Aromatic hydrocarbons |
Good-Fair |
| Greases and Oils |
Good |
| Halogenated Hydrocarbons |
Good-Poor |
| Halogens |
Fair-Poor |
| Ketones |
Good-Fair |
| Electrical Properties(鐢垫皵鐗规€? |
| Dielectric constant @1MHz |
3 |
| Dielectric strength ( kV mm?1 ) |
17.0 |
| Dissipation factor @ 1kHz |
0.0020 |
| Surface resistivity ( Ohm/sq ) |
1013 |
| Volume resistivity ( Ohmcm ) |
>101? |
| Thermal Properties(鐑€ц兘) |
| Coefficient of thermal expansion ( x10?? K?1 ) |
20.000 - 80.000 |
| Heat-deflection temperature - 0.45MPa ( C ) |
115 |
| Heat-deflection temperature - 1.8MPa ( C ) |
80.0 |
| Lower working temperature ( C ) |
-40 - -60 |
| Specific heat ( J K?1 kg?1 ) |
1200.0 - 1350.0 |
| Thermal conductivity ( W m?1 K?1 ) |
0.15 - 0.40 @23鈩傸/td> |
| Upper working temperature ( C ) |
115 - 170 |
| Physical Properties(鐗╃悊鎬ц川) |
| Density ( g cm?3 ) |
1.300 - 1.400 |
| Flammability |
HB |
| Limiting oxygen index ( % ) |
21 |
| Radiation resistance |
Good |
| Refractive index |
1.580-1.640 |
| Resistance to Ultra-violet |
Fair |
| Water absorption - equilibrium ( % ) |
< 0.70 |
| Water absorption - over 24 hours ( % ) |
0.100 |
| Mechanical Properties(鏈烘鎬ц兘) |
| Coefficient of friction |
0.20 - 0.40 |
| Hardness - Rockwell |
M94-101 |
| Izod impact strength ( J m?1 ) |
13.0 - - 35.0 |
| Poisson's ratio |
0.370 - 0.440 |
| Tensile modulus ( GPa ) |
2.00 - 4.00 |
| Tensile strength ( MPa ) |
80.00 , for biax film 190-260 |
鍏朵粬鍙傛暟
鍏樊
| 闀垮害 |
<100mm |
卤1mm |
| 鈮?00mm |
+2% / -1% |
| 鐩村緞 |
<100mm |
卤1mm |
| 鈮?00mm |
+2% / -1% |
| 鍘氬害 |
|
卤10% |
| 闀垮害 1 |
<100mm |
卤1mm |
| 鈮?00mm |
+2% / -1% |
| 闀垮害 2 |
<100mm |
卤1mm |
| 鈮?00mm |
+2% / -1% |
m.cnreagent.com
