Dural,閾濋摐闀?绠? Al95Cu4Mg1, 0.708mm ID, 0.81mm OD, As Drawn Temper
浜у搧浠嬬粛
| 璁㈣揣鍙饵/strong> |
鍖呰瑙勬牸 |
| Length (Round) |
| 125-438-81 |
95 mm |
| 752-168-09 |
195 mm |
浜у搧鍙傛暟
| Inside Diameter[鍐呴儴鐩村緞] |
0.708mm |
| Length[闀垮害] |
95 mm - 195 mm |
| Outside Diameter[澶栭儴鐩村緞] |
0.81mm |
| Temper[鐘舵€乚 |
As Drawn |
| Wall Thickness[澹佸帤] |
0.051mm |
| Typical Analysis(鍏稿瀷鍒嗘瀽) |
| Cr |
<3000 PPM |
| Physical Properties(鐗╃悊鎬ц川) |
| Density ( g cm?? ) |
2.800 |
| Mechanical Properties(鏈烘鎬ц兘) |
| Elongation at break ( % ) |
< 22.0 |
| Hardness - Brinell |
115 - 135 |
| Izod impact strength ( J m?? ) |
8.0 - 22.0 |
| Modulus of elasticity ( GPa ) |
73.0 |
| Tensile strength ( MPa ) |
420.00 - 500.00 |
| Thermal Properties(鐑€ц兘) |
| Coefficient of thermal expansion ( x10?? K?? ) |
22.500 @20-100鈩傸/td> |
| Thermal conductivity ( W m?? K?? ) |
147.00 @23鈩傸/td> |
| Electrical Properties(鐢垫皵鐗规€? |
| Electrical resistivity ( 渭Ohmcm ) |
5 |
| Temperature coefficient ( K?? ) |
0.00220 - 0.00260 |
鍏朵粬鍙傛暟
鍏樊
| 澶栭儴鐩村緞 |
鈮?mm |
±0.05mm |
| 鑱氬悎鐗?/td> |
±10% |
| 闄剁摲 |
±10% |
|
| 鈮?mm |
±0.1mm |
| 鑱氬悎鐗?/td> |
±10% |
| 闄剁摲 |
±10% |
|
| >5mm |
±5% |
| 鑱氬悎鐗?/td> |
±10% |
| 闄剁摲 |
±10% |
|
| 澹佸帤 |
|
±10% |
| 鑱氬悎鐗?/td> |
±20% |
| 闄剁摲 |
±20% |
|
| 闀垮害 |
<100mm |
±1mm |
| 鈮?00mm |
+5% / -1% |
|
|
Goodfellow锛堥【鐗规湇锛堻/span>
鐢佃瘽:鐐瑰嚮&鏌ョ湅18024074014
鍦板潃:
鍚屽搧鐗屼骇鍝侊細
|
m.cnreagent.com
