Contains anti-oxidant additive only.
Lay-flat tubing which may be slit along one edge to give a coil of twice the width having a centre crease.
Due to the absence of anti-block additive it is difficult to separate the 2 "sides" of this lay flat tubing.
订货号 |
包装规格 |
Sizes |
137-269-75 |
150mm x 150mm |
129-247-38 |
200mm x 200mm |
110-612-90 |
300mm x 300mm |
Coil |
688-547-64 |
600mm x 0.5m |
068-456-09 |
600mm x 1m |
557-005-68 |
600mm x 2m |
625-712-03 |
600mm x 5m |
214-010-20 |
600mm x 10m |
半岛bd体育手机客户端 参数
Coil Width[卷材宽度] |
600mm |
Structure[结构] |
Biaxially Oriented |
Thickness[厚度] |
0.025mm |
Transparency[透明度] |
Clear/Transparent |
Chemical Resistance(耐化学性) |
Acids - concentrated |
Good-Fair |
Acids - dilute |
Good |
Alcohols |
Good |
Alkalis |
Good |
Aromatic hydrocarbons |
Fair-Poor |
Greases and Oils |
Good-Fair |
Halogenated Hydrocarbons |
Fair-Poor |
Halogens |
Fair-Poor |
Ketones |
Good-Fair |
Physical Properties(物理性质) |
Density ( g cm?? ) |
0.920 |
Flammability |
HB |
Limiting oxygen index ( % ) |
17 |
Radiation resistance |
Fair |
Refractive index |
1.510 |
Resistance to Ultra-violet |
Poor |
Water absorption - over 24 hours ( % ) |
< 0.015 |
Thermal Properties(热性能) |
Coefficient of thermal expansion ( x10?? K?? ) |
100.000 - 200.000 |
Heat-deflection temperature - 0.45MPa ( C ) |
50 |
Heat-deflection temperature - 1.8MPa ( C ) |
35.0 |
Lower working temperature ( C ) |
-60 |
Specific heat ( J K?? kg?? ) |
1900.0 - 2300.0 |
Thermal conductivity ( W m?? K?? ) |
0.33 @23℃ |
Upper working temperature ( C ) |
50 - 90 |
Mechanical Properties(机械性能) |
Elongation at break ( % ) |
400.0 |
Hardness - Rockwell |
D41-46-Shore |
Izod impact strength ( J m?? ) |
> 1000.0 |
Tensile modulus ( GPa ) |
0.10 - 0.30 |
Tensile strength ( MPa ) |
5.00 - 25.00 |
Electrical Properties(电气特性) |
Dielectric constant @1MHz |
2 - 2 |
Dielectric strength ( kV mm?? ) |
27.0 |
Dissipation factor @ 1MHz |
1.0000 - 10.0000 x 10?? |
Surface resistivity ( Ohm/sq ) |
10?? |
Volume resistivity ( Ohmcm ) |
10??-10?? |
其他参数
公差
直径 |
<100mm |
±1mm |
≥100mm |
+2% / -1% |
厚度 |
|
±20% |
长度 1 |
<100mm |
±1mm |
≥100mm |
+2% / -1% |
长度 2 |
<100mm |
±1mm |
≥100mm |
+2% / -1% |