BEWARE OF MACHINING

We cannot accept complaints or returns resulting from any attempt to machine this material, including any arising from any attempt to machine this material including any arising from cracking or delamination in the material as supplied.

Please read the General Description under Technical Data, especially the third paragraph, for an explanation of possible machining problems.

璁㈣揣鍙饵/strong>	鍖呰瑙勬牸
Length (Round)
293-722-27	100 mm
186-154-49	200 mm
675-060-15	500 mm
367-374-11	1000 mm

浜у搧鍙傛暟

Colour[棰滆壊]	Black
Diameter[鐩村緞]	10mm
Length[闀垮害]	100 mm - 1000 mm
Physical Properties(鐗╃悊鎬ц川)
Density ( g cm?? )	1.500
Flammability	V-0
Radiation resistance	Good
Resistance to Ultra-violet	Good
Chemical Resistance(鑰愬寲瀛︽€?
Acids - concentrated	Fair
Acids - dilute	Good
Alcohols	Good
Alkalis	Fair
Aromatic hydrocarbons	Good
Greases and Oils	Good
Ketones	Good
Electrical Properties(鐢垫皵鐗规€?
Dielectric constant @1MHz	3
Dielectric strength ( kV mm?? )	34.0
Dissipation factor @ 1MHz	0.0180
Surface resistivity ( Ohm/sq )	10??
Volume resistivity ( Ohmcm )	>10??
Mechanical Properties(鏈烘鎬ц兘)
Compressive modulus ( GPa )	10.0
Elongation at break ( % )	3.1
Hardness - Rockwell	M80
Tensile modulus ( GPa )	12.00
Tensile strength ( MPa )	200.00
Pultrusion(鎸ゆ媺鎴愬瀷)
Compressive strength ( MPa )	85
Thermal Properties(鐑€ц兘)
Coefficient of thermal expansion ( x10?? K?? )	5.000 - 18.000
Heat-deflection temperature - 1.8MPa ( C )	230.0
Thermal conductivity ( W m?? K?? )	3.00 - 3.30
Upper working temperature ( C )	200 - 220

鍏朵粬鍙傛暟

鍏樊

鐩村緞	鈮?0mm	±10%
	鑱氬悎鐗?/td>	+20% / -10%
	闄剁摲	+20% / -10%
	>10mm	±5%
	闄剁摲	+20% / -10%
	鑱氬悎鐗?/td>	+20% / -10%
闀垮害	<100mm	±1mm
	鈮?00mm	+5% / -1%