| 化合物类别: | |
| 材质: | |
| 材质名称、CAS号: |
| 化合物类别 | 材质 | 化合物CAS | 化合物名称 | 耐受性 |
| Acids (aq.) 酸类(水相/水溶液) |
epoxy resin 环氧树脂 |
88-89-1 | picric acid 2,4,6-trinitrophenol 苦味酸 (2,4,6-三硝基苯酚) |
marginal resistance 耐受性一般 |
| Acids (aq.) 酸类(水相/水溶液) |
epoxy resin/carbon composite 环氧树脂/碳纤维复合材料 |
88-89-1 | picric acid 2,4,6-trinitrophenol 苦味酸 (2,4,6-三硝基苯酚) |
marginal resistance 耐受性一般 |
| Acids (aq.) 酸类(水相/水溶液) |
neoprene / polychloroprene 氯丁橡胶 |
88-89-1 | picric acid 2,4,6-trinitrophenol 苦味酸 (2,4,6-三硝基苯酚) |
marginal resistance 耐受性一般 |
| Acids (aq.) 酸类(水相/水溶液) |
stainless steel 不锈钢 |
88-89-1 | picric acid 2,4,6-trinitrophenol 苦味酸 (2,4,6-三硝基苯酚) |
marginal resistance 耐受性一般 |
| Acids (aq.) 酸类(水相/水溶液) |
synthetic rubber (EPDM) 合成橡胶(三元乙丙橡胶) |
88-89-1 | picric acid 2,4,6-trinitrophenol 苦味酸 (2,4,6-三硝基苯酚) |
marginal resistance 耐受性一般 |
| Acids (aq.) 酸类(水相/水溶液) |
flexible polyvinyl chloride (PVC / Tygon) 柔性聚氯乙烯 |
88-89-1 | picric acid 2,4,6-trinitrophenol 苦味酸 (2,4,6-三硝基苯酚) |
marginal resistance 耐受性一般 discoloration 变色，褪色 |
| Acids (aq.) 酸类(水相/水溶液) |
acetal copolymer (Celcon) 共聚甲醛 |
88-89-1 | picric acid 2,4,6-trinitrophenol 苦味酸 (2,4,6-三硝基苯酚) |
satisfactory resistance 耐受性高 |
| Acids (aq.) 酸类(水相/水溶液) |
alumina (Al2O3) 氧化铝 |
88-89-1 | picric acid 2,4,6-trinitrophenol 苦味酸 (2,4,6-三硝基苯酚) |
satisfactory resistance 耐受性高 |
| Acids (aq.) 酸类(水相/水溶液) |
aluminum7 铝合金 |
88-89-1 | picric acid 2,4,6-trinitrophenol 苦味酸 (2,4,6-三硝基苯酚) |
satisfactory resistance 耐受性高 |
| Acids (aq.) 酸类(水相/水溶液) |
anodic coating7 氧化膜/阳极镀层 |
88-89-1 | picric acid 2,4,6-trinitrophenol 苦味酸 (2,4,6-三硝基苯酚) |
satisfactory resistance 耐受性高 |
| Acids (aq.) 酸类(水相/水溶液) |
paint, water-based 水性涂料 |
88-89-1 | picric acid 2,4,6-trinitrophenol 苦味酸 (2,4,6-三硝基苯酚) |
satisfactory resistance 耐受性高 |
| Acids (aq.) 酸类(水相/水溶液) |
polycarbonate (PC) 聚碳酸酯 |
88-89-1 | picric acid 2,4,6-trinitrophenol 苦味酸 (2,4,6-三硝基苯酚) |
satisfactory resistance 耐受性高 |
| Acids (aq.) 酸类(水相/水溶液) |
polyethylene (HDPE) 高密度聚乙烯 |
88-89-1 | picric acid 2,4,6-trinitrophenol 苦味酸 (2,4,6-三硝基苯酚) |
satisfactory resistance 耐受性高 |
| Acids (aq.) 酸类(水相/水溶液) |
polyethylene terephthalate (PET) 聚对苯二甲酸乙酯 |
88-89-1 | picric acid 2,4,6-trinitrophenol 苦味酸 (2,4,6-三硝基苯酚) |
satisfactory resistance 耐受性高 |
| Acids (aq.) 酸类(水相/水溶液) |
polyethylene terephthalate glycol (PETG / Ultra-Clear) 聚对苯二甲酸乙二醇酯 (超净管) |
88-89-1 | picric acid 2,4,6-trinitrophenol 苦味酸 (2,4,6-三硝基苯酚) |
satisfactory resistance 耐受性高 |
| Acids (aq.) 酸类(水相/水溶液) |
polyethylene terephthalate polyester film (Mylar) 聚对苯二甲酸乙二醇酯的聚酯膜 (聚酯薄膜) |
88-89-1 | picric acid 2,4,6-trinitrophenol 苦味酸 (2,4,6-三硝基苯酚) |
satisfactory resistance 耐受性高 |
| Acids (aq.) 酸类(水相/水溶液) |
polyphenylene oxide (PPO / Noryl) 聚苯醚 (改性聚苯醚) |
88-89-1 | picric acid 2,4,6-trinitrophenol 苦味酸 (2,4,6-三硝基苯酚) |
satisfactory resistance 耐受性高 |
| Acids (aq.) 酸类(水相/水溶液) |
polypropylene (PP) 聚丙烯 (丙纶) |
88-89-1 | picric acid 2,4,6-trinitrophenol 苦味酸 (2,4,6-三硝基苯酚) |
satisfactory resistance 耐受性高 |
| Acids (aq.) 酸类(水相/水溶液) |
polystyrene (PS) 聚苯乙烯 |
88-89-1 | picric acid 2,4,6-trinitrophenol 苦味酸 (2,4,6-三硝基苯酚) |
satisfactory resistance 耐受性高 |
| Acids (aq.) 酸类(水相/水溶液) |
polysulfone (PSF) 聚砜 |
88-89-1 | picric acid 2,4,6-trinitrophenol 苦味酸 (2,4,6-三硝基苯酚) |
satisfactory resistance 耐受性高 |
| Acids (aq.) 酸类(水相/水溶液) |
synthetic rubber (Viton) (Viton) 合成橡胶(氟化橡胶) (氟橡胶) |
88-89-1 | picric acid 2,4,6-trinitrophenol 苦味酸 (2,4,6-三硝基苯酚) |
satisfactory resistance 耐受性高 |
| Acids (aq.) 酸类(水相/水溶液) |
teflon (PTFE / Rulon A) 聚四氟乙烯 (特氟隆) |
88-89-1 | picric acid 2,4,6-trinitrophenol 苦味酸 (2,4,6-三硝基苯酚) |
satisfactory resistance 耐受性高 |
| Acids (aq.) 酸类(水相/水溶液) |
titanium (Ti) 钛合金 |
88-89-1 | picric acid 2,4,6-trinitrophenol 苦味酸 (2,4,6-三硝基苯酚) |
satisfactory resistance 耐受性高 |
| Acids (aq.) 酸类(水相/水溶液) |
acetal homopolymer (Delrin) 均聚甲醛 |
88-89-1 | picric acid 2,4,6-trinitrophenol 苦味酸 (2,4,6-三硝基苯酚) |
satisfactory resistance 耐受性高 discoloration 变色，褪色 |
| Acids (aq.) 酸类(水相/水溶液) |
polyurethane paint (PU / PUR) 聚氨酯涂层 |
88-89-1 | picric acid 2,4,6-trinitrophenol 苦味酸 (2,4,6-三硝基苯酚) |
satisfactory resistance 耐受性高 discoloration 变色，褪色 |
| Acids (aq.) 酸类(水相/水溶液) |
silicone elastomer (RTV / Silastic) 有机硅弹性体 (硅橡胶) |
88-89-1 | picric acid 2,4,6-trinitrophenol 苦味酸 (2,4,6-三硝基苯酚) |
satisfactory resistance 耐受性高 discoloration 变色，褪色 |
| Acids (aq.) 酸类(水相/水溶液) |
acrylic (plexiglass) 丙烯酸树脂 (有机玻璃) |
88-89-1 | picric acid 2,4,6-trinitrophenol 苦味酸 (2,4,6-三硝基苯酚) |
unsatisfactory resistance 耐受性低 |
| Acids (aq.) 酸类(水相/水溶液) |
nitrile rubber (Buna N) 丁腈橡胶 |
88-89-1 | picric acid 2,4,6-trinitrophenol 苦味酸 (2,4,6-三硝基苯酚) |
unsatisfactory resistance 耐受性低 |
| Acids (aq.) 酸类(水相/水溶液) |
nylon (6, 6/6) 尼龙 (锦纶) |
88-89-1 | picric acid 2,4,6-trinitrophenol 苦味酸 (2,4,6-三硝基苯酚) |
unsatisfactory resistance 耐受性低 |
| Acids (aq.) 酸类(水相/水溶液) |
polyethylene (LDPE) 低密度聚乙烯 |
88-89-1 | picric acid 2,4,6-trinitrophenol 苦味酸 (2,4,6-三硝基苯酚) |
unsatisfactory resistance 耐受性低 |
| Acids (aq.) 酸类(水相/水溶液) |
polyphenylsulfone (PPSU / Radel) 聚苯砜 |
88-89-1 | picric acid 2,4,6-trinitrophenol 苦味酸 (2,4,6-三硝基苯酚) |
unsatisfactory resistance 耐受性低 |
| Acids (aq.) 酸类(水相/水溶液) |
polyurethane liner (PU / PUR) 聚氨酯 |
88-89-1 | picric acid 2,4,6-trinitrophenol 苦味酸 (2,4,6-三硝基苯酚) |
unsatisfactory resistance 耐受性低 |
| Acids (aq.) 酸类(水相/水溶液) |
polyvinyl chloride (PVC) 聚氯乙烯 |
88-89-1 | picric acid 2,4,6-trinitrophenol 苦味酸 (2,4,6-三硝基苯酚) |
unsatisfactory resistance 耐受性低 |
| Acids (aq.) 酸类(水相/水溶液) |
silicone rubber 硅橡胶 |
88-89-1 | picric acid 2,4,6-trinitrophenol 苦味酸 (2,4,6-三硝基苯酚) |
unsatisfactory resistance 耐受性低 |
| Acids (aq.) 酸类(水相/水溶液) |
polyetherimide (PEI / Ultem) 聚醚酰亚胺 |
88-89-1 | picric acid 2,4,6-trinitrophenol 苦味酸 (2,4,6-三硝基苯酚) |
 unknown【耐受性未知】Flammability hazard.Not recommended for use in any type of centrifuge because vapors may be exposure to electrical contacts.Depending on the centrifuge type,such exposure could occur either during normal centrifugation or under failure conditions. 可燃性危险。不推荐用于任何类型的离心机，因为挥发蒸汽可能接触到电触点。而根据离心机类型，在正常离心或离心失败的情况下都可能会发生此类风险。 |
| Acids (aq.) 酸类(水相/水溶液) |
polyphenylene sulfide (PPS) 聚苯硫醚 |
88-89-1 | picric acid 2,4,6-trinitrophenol 苦味酸 (2,4,6-三硝基苯酚) |
unknown【耐受性未知】 Flammability hazard.Not recommended for use in any type of centrifuge because vapors may be exposure to electrical contacts.Depending on the centrifuge type,such exposure could occur either during normal centrifugation or under failure conditions. 可燃性危险。不推荐用于任何类型的离心机，因为挥发蒸汽可能接触到电触点。而根据离心机类型，在正常离心或离心失败的情况下都可能会发生此类风险。 |
| Acids (aq.) 酸类(水相/水溶液) |
copolymer/polyallomer (PA) 聚丙烯和聚乙烯聚合物 |
88-89-1 | picric acid 2,4,6-trinitrophenol 苦味酸 (2,4,6-三硝基苯酚) |
satisfactory resistance 耐受性高 |
m.cnreagent.com
